[kernel][cm9 ][E400] Jeeiko Kernel 0.1

Status
Not open for further replies.
Search This thread

deeiko

Member
Jul 1, 2013
24
30
;) Hi Friends , I bring new custom kernel for cm9

**Features**

1-. Overlock to 1.1 GHZ

2-. Add New 4 Governors

3-. Support SDMERGE


**Governors**

1-. Lazy
2-. LionHeart
3-. SavagedZe
4-.SmartassV2


1: Lazy:
This governor from Ezekeel is basically an ondemand with an additional parameter min_time_state to specify the minimum time CPU stays on a frequency before scaling up/down. The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand. Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state on a step overriding sampling interval. Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always select the maximum frequency while the screen is off.

2: Lionheart:
Lionheart is a conservative-based governor which is based on samsung's update3 source.
The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.

3: SavagedZen:
Another smartassV2 based governor. Achieves good balance between performance & battery as compared to brazilianwax.

4: SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.

How to Install?

Easy

1. download Zip flasheable
2. Put in sd card
3. Reboot in recovery
4. Not wipes (optional)
5. Install zip from sd card
6. Flash Jeeiko Kernel .

<MODERATOR EDITED - LINK REMOVED>
 

Attachments

  • 1931900_285600728257662_224369473_n.jpg
    1931900_285600728257662_224369473_n.jpg
    8.4 KB · Views: 586
  • 1927221_285600724924329_2113073815_n.jpg
    1927221_285600724924329_2113073815_n.jpg
    8.4 KB · Views: 537
  • 1925252_1407982076118890_1182521455_n.jpg
    1925252_1407982076118890_1182521455_n.jpg
    11.8 KB · Views: 545
  • 1931943_285600718257663_1632016180_n.jpg
    1931943_285600718257663_1632016180_n.jpg
    8.2 KB · Views: 517
Last edited by a moderator:
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    ;) Hi Friends , I bring new custom kernel for cm9

    **Features**

    1-. Overlock to 1.1 GHZ

    2-. Add New 4 Governors

    3-. Support SDMERGE


    **Governors**

    1-. Lazy
    2-. LionHeart
    3-. SavagedZe
    4-.SmartassV2


    1: Lazy:
    This governor from Ezekeel is basically an ondemand with an additional parameter min_time_state to specify the minimum time CPU stays on a frequency before scaling up/down. The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand. Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state on a step overriding sampling interval. Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always select the maximum frequency while the screen is off.

    2: Lionheart:
    Lionheart is a conservative-based governor which is based on samsung's update3 source.
    The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.

    3: SavagedZen:
    Another smartassV2 based governor. Achieves good balance between performance & battery as compared to brazilianwax.

    4: SmartassV2:
    Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.

    How to Install?

    Easy

    1. download Zip flasheable
    2. Put in sd card
    3. Reboot in recovery
    4. Not wipes (optional)
    5. Install zip from sd card
    6. Flash Jeeiko Kernel .

    <MODERATOR EDITED - LINK REMOVED>
    4
    When the OP has kernel source ready to post, he is welcome to report the thread and request it be re-opened.
    Until that time, thread is closed.

    I've also cleaned the thread of non-development chatter and arguing... please ensure there's no repeat of this.
    1
    Sources for Kernel?
    It seems good but , we need some proof