[KERNEL]Despair Kernel R6.6

Search This thread

oriveradel

Senior Member
Sep 29, 2007
1,127
245
Latest HydrogenOS + Dispair Kernel
 

Attachments

  • 1451077997417.jpg
    1451077997417.jpg
    38 KB · Views: 577

[email protected]

Senior Member
Aug 14, 2013
436
216
It uses the same source nearly, give it a go, I have most of the patches Grarak has added to his cm-13 builds in all my versions
Okay, have tried and it booted and worked very well but brake the integrated root version of cm.
So I flashed newest SuperSu Beta 2.64 and it runs, but this break functionality of Gravity Screen app. Screen can't switched off by the app. Don't know if it's Kernel related or a problem with root/SuperSU.

Maybe you can implement support for cm root. Then I would like to test again.

Thank you very much appreciate your work.

Gesendet von meinem ONE A2003 mit Tapatalk
 

DespairFactor

Recognized Developer / Recognized Contributor
Mar 13, 2013
5,786
12,339
Toronto
Okay, have tried and it booted and worked very well but brake the integrated root version of cm.
So I flashed newest SuperSu Beta 2.64 and it runs, but this break functionality of Gravity Screen app. Screen can't switched off by the app. Don't know if it's Kernel related or a problem with root/SuperSU.

Maybe you can implement support for cm root. Then I would like to test again.

Thank you very much appreciate your work.

Gesendet von meinem ONE A2003 mit Tapatalk

I don't touch init files, so I don't need to add support
 

jpovedam

Senior Member
Nov 22, 2014
140
43
Spain
Hi all, I have OnePlus Two with Oxygen OS v2.2.0.
What should I install kernel that is compatible with Oxygen OS v2.2.1?
Despair-CM-R6.6-OPT.zip or Despair-R6.6-OPT.zip?
There are bugs?

Thanks
 

milestone2mod

Senior Member
Mar 20, 2012
302
270
Hi all, I have OnePlus Two with Oxygen OS v2.2.0.
What should I install kernel that is compatible with Oxygen OS v2.2.1?
Despair-CM-R6.6-OPT.zip or Despair-R6.6-OPT.zip?
There are bugs?

Thanks

Take the Despair-R6.6-OPT.zip. Despair-CM-R6.6-OPT.zip is (as the name states) for CyanogenMod.
There are a few bugs, but nothing dramatical. See the last two or three pages, most obvious bugs are already listet there.
 
  • Like
Reactions: jpovedam

zoroarctic

Senior Member
Jun 3, 2015
623
472
Mumbai
Can someone please upload v6.6 OPT to google drive or Dropbox and give me a link? Renderserver isn't working for me :(
Edit: Nevermind, found a post a few pages back with @Hetalk's link :)
 
Last edited:

chris264

Senior Member
Apr 10, 2012
1,331
434
Sorry for the stupid question but the Cm version of this kernel, is the for Android Apps 5.1 or Android 6? Maybe could be found the in the Startpost Write a. Because find it so much opaque. is not a review, but only a suggestions. Cute Greetings

Gesendet von meinem oneplus2 mit Tapatalk
 

[email protected]

Senior Member
Aug 14, 2013
436
216
It works with CM 6.0.1, but you have to flash SuperSu 2.64 after to get root access. Included Root management will be disabled by the kernel.

Don't know if it works even with 5.1.1.

Gesendet von meinem ONE A2003 mit Tapatalk
 
  • Like
Reactions: chris264

deedeeceleb

Senior Member
Oct 10, 2011
469
227
Hey there. Perhaps someone can help me sorting out a bug. I'm getting a cam crash and random reboot with stock oos cam after changing little cpu governor to Lionheart. Anyone here might test and can confirm the issue? Thanks for helping!
Kernel audiutor
Big: barry allen
Little: Lionheart
Io: fiops
Everything's set on boot

I think it might be related to Lionheart only since cam is fine when using despair governor

Gesendet von meinem ONE A2003 mit Tapatalk
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 24
    As you may have heard, this is the Despair Kernel for OnePlus Two, bug reports without any logs are nearly useless unless you can provide a way to recreate the bug.

    Features:
    Additional governors
    Additional IO schedulers
    TCP congestion control algorithms
    Packet schedulers added
    KCAL

    Downloads:
    https://renderserver.net/browse?path=DespairFactor/oneplustwo

    Source:
    https://github.com/DespairFactor/OPT

    Flashing:
    When flashing this kernel, please flash stock first because this uses the ramdisk on your device.

    Credits:
    Grarak
    savoca
    OnePlus


    XDA:DevDB Information
    [KERNEL]Despair Kernel, Kernel for the OnePlus 2

    Contributors
    DespairFactor
    Source Code: https://github.com/DespairFactor/OPT

    Kernel Special Features:

    Version Information
    Status: Testing

    Created 2015-09-19
    Last Updated 2015-12-24
    14
    Check me out on Twitter, I actually respond to people who mention me. I also answer questions about kernels, roms and everything android.
    https://twitter.com/DespairDev

    Despair Development G+: https://plus.google.com/u/0/communities/117685307734094084120
    11
    I just uploaded a new build with about 320 or so commits added to R5.2
    9
    Packet Schedulers/Congestion Avoidance Algorithms:

    CDG vs. Cubic vs. Westwood:

    CDG
    CAIA-Delay Gradient (CDG) is a hybrid congestion control algorithm which reacts to both packet loss and inferred queuing delay. It attempts to operate as a delay-based algorithm where possible, but utilises heuristics to detect loss-based TCP cross traffic and will compete effectively as required. CDG is therefore incrementally deployable and suitable for use on shared networks. During delay-based operation, CDG uses a delay-gradient based probabilistic backoff mechanism, and will also try to infer non congestion related packet losses and avoid backing off when they occur. During loss-based operation, CDG essentially reverts to reno-like behaviour. CDG switches to loss-based operation when it detects that a configurable number of consecutive delay-based backoffs have had no measurable effect. It periodically attempts to return to delay-based operation, but will keep switching back to loss-based operation as required.

    Cubic
    CUBIC is an enhanced version of BIC: it simplifies the BIC window control and improves its TCP-friendliness and RTT-fairness. The window growth function of CUBIC is governed by a cubic function in terms of the elapsed time since the last loss event. Our experience indicates that the cubic function provides a good stability and scalability. Furthermore, the real-time nature of the protocol keeps the window growth rate independent of RTT, which keeps the protocol TCP friendly under both short and long RTT paths.

    Westwood
    TCP Westwood estimates the available bandwidth by counting and filtering the flow of returning ACKs and adaptively sets the cwnd and the sshtresh after congestion by taking into account the estimated bandwidth.TCP Westwood, is a sender-side-only modification to TCP New Reno that is intended to better handle large bandwidth-delay product paths (large pipes), with potential packet loss due to transmission or other errors (leaky pipes) and with dynamic load (dynamic pipes). TCP Westwood+ is an evolution of TCP Westwood, in fact it was soon discovered that the Westwood bandwidth estimation algorithm did not work well in the presence of reverse traffic due to ACK compression. Westwood+ is friendly towards TCP Reno and fairer than Reno in bandwidth allocation.

    Packet Schedulers:

    Why use a non default packet scheduler?
    Packet schedulers are a portion of the kernel that queues network data on a specific interface and governs how they are transmitted and received including buffers. Below I will breakdown a couple of the packet schedulers included in this kernel.

    fq_codel
    FQ_Codel (Fair Queuing Controlled Delay) is queuing discipline that combines Fair Queuing with the CoDel AQM scheme. FQ_Codel uses a stochastic model to classify incoming packets into different flows and is used to provide a fair share of the bandwidth to all the flows using the queue. Each such flow is managed by the CoDel queuing discipline. Reordering within a flow is avoided since Codel internally uses a FIFO queue.

    pfifo_fast
    The FIFO algorithm forms the basis for the default qdisc on all Linux network interfaces (pfifo_fast). It performs no shaping or rearranging of packets. It simply transmits packets as soon as it can after receiving and queuing them. This is also the qdisc used inside all newly created classes until another qdisc or a class replaces the FIFO.

    A real FIFO qdisc must, however, have a size limit (a buffer size) to prevent it from overflowing in case it is unable to dequeue packets as quickly as it receives them. Linux implements two basic FIFO qdiscs, one based on bytes, and one on packets. Regardless of the type of FIFO used, the size of the queue is defined by the parameter limit. For a pfifo the unit is understood to be packets and for a bfifo the unit is understood to be bytes.

    pie
    PIE is designed to control delay effectively. First, an average dequeue rate is estimated based on the standing queue. The rate is used to calculate the current delay. Then, on a periodic basis, the delay is used to calculate the dropping probabilty. Finally, on arrival, a packet is dropped (or marked) based on this probability. PIE makes adjustments to the probability based on the trend of the delay i.e. whether it is going up or down.The delay converges quickly to the target value specified. alpha and beta are statically chosen parameters chosen to control the drop probability growth and are determined through control theoretic approaches. alpha determines how the deviation between the current and target latency changes probability. beta exerts additional adjustments depending on the latency trend. The drop probabilty is used to mark packets in ecn mode. However, as in RED, beyond 10% packets are dropped based on this probability. The bytemode is used to drop packets proportional to the packet size.

    fq
    A packet scheduler is charged with organizing the flow of packets through the network stack to meet a set of policy objectives. The kernel has quite a few of them, including CBQ for fancy class-based routing, CHOKe for routers, and a couple of variants on the CoDel queue management algorithm. FQ joins this list as a relatively simple scheduler designed to implement fair access across large numbers of flows with local endpoints while keeping buffer sizes down; it also happens to implement TCP pacing.

    FQ keeps track of every flow it sees passing through the system. To do so, it calculates an eight-bit hash based on the socket associated with the flow, then uses the result as an index into an array of red-black trees. The data structure is designed, according to Eric, to scale well up to millions of concurrent flows. A number of parameters are associated with each flow, including its current transmission quota and, optionally, the time at which the next packet can be transmitted.

    That transmission time is used to implement the TCP pacing support. If a given socket has a pace specified for it, FQ will calculate how far the packets should be spaced in time to conform to that pace. If a flow's next transmission time is in the future, that flow is added to another red-black tree with the transmission time used as the key; that tree, thus, allows the kernel to track delayed flows and quickly find the one whose next packet is due to go out the soonest. A single timer is then used, if needed, to ensure that said packet is transmitted at the right time.

    The scheduler maintains two linked lists of active flows, the "new" and "old" lists. When a flow is first encountered, it is placed on the new list. The packet dispatcher services flows on the new list first; once a flow uses up its quota, that flow is moved to the old list. The idea here appears to be to give preferential treatment to new, short-lived connections — a DNS lookup or HTTP "GET" command, for example — and not let those connections be buried underneath larger, longer-lasting flows. Eventually the scheduler works its way through all active flows, sending a quota of data from each; then the process starts over.

    There are a number of additional details, of course. There are limits on the amount of data queued for each flow, as well as a limit on the amount of data buffered within the scheduler as a whole; any packet that would exceed one of those limits is dropped. A special "internal" queue exists for high-priority traffic, allowing it to reach the wire more quickly. And so on.

    One other detail is garbage collection. One problem with this kind of flow tracking is that nothing tells the scheduler when a particular flow is shut down; indeed, nothing can tell the scheduler for flows without local endpoints or for non-connection-oriented protocols. So the scheduler must figure out on its own when it can stop tracking any given flow. One way to do that would be to drop the flow as soon as there are no packets associated with it, but that would cause some thrashing as the queues empty and refill; it is better to keep flow data around for a little while in anticipation of more traffic. FQ handles this by putting idle flows into a special "detached" state, off the lists of active flows. Whenever a new flow is added, a pass is made over the associated red-black tree to clean out flows that have been detached for a sufficiently long time — three seconds in the current patch.

    cake
    The CAKE Principle:
    (or, how to have your cake and eat it too)

    This is a combination of several shaping, AQM and FQ
    techniques into one easy-to-use package:

    - An overall bandwidth shaper, to move the bottleneck away
    from dumb CPE equipment and bloated MACs. This operates
    in deficit mode (as in sch_fq), eliminating the need for
    any sort of burst parameter (eg. token buxket depth).
    Burst support is limited to that necessary to overcome
    scheduling latency.

    - A Diffserv-aware priority queue, giving more priority to
    certain classes, up to a specified fraction of bandwidth.
    Above that bandwidth threshold, the priority is reduced to
    avoid starving other classes.

    - Each priority class has a separate Flow Queue system, to
    isolate traffic flows from each other. This prevents a
    burst on one flow from increasing the delay to another.
    Flows are distributed to queues using a set-associative
    hash function.

    - Each queue is actively managed by Codel. This serves
    flows fairly, and signals congestion early via ECN
    (if available) and/or packet drops, to keep latency low.
    The codel parameters are auto-tuned based on the bandwidth
    setting, as is necessary at low bandwidths.

    The configuration parameters are kept deliberately simple
    for ease of use. Everything has sane defaults. Complete
    generality of configuration is not a goal.

    The priority queue operates according to a weighted DRR
    scheme, combined with a bandwidth tracker which reuses the
    shaper logic to detect which side of the bandwidth sharing
    threshold the class is operating. This determines whether
    a priority-based weight (high) or a bandwidth-based weight
    (low) is used for that class in the current pass.

    This qdisc incorporates much of Eric Dumazet's fq_codel code,
    customised for use as an integrated subordinate.


    How to apply a packet scheduler:

    1. Open terminal on your device
    2. Use the "su" command to become root
    3. Use tc to change the packet scheduler(qdisc) on your device. I have included an example below, the first line is for WiFi and the second for data. In the example, we are setting the qdisc to fq_pie, which is a mix of PIE with per flow rate shaping from fq.
    Code:
     tc qdisc add dev wlan0 root fq_pie
     tc qdisc add dev rmnet_data0 root fq_pie
    4. Confirm your packet scheduler has been applied by using the tc tool again. I have included an example below.
    Code:
    tc  qdisc

    To use another packet scheduler after applying a previous one, you will need to either reboot or remove the added qdisc from each interface using the command I have included below.
    Code:
    tc qdisc del root dev wlan0
    tc qdisc del root dev rmnet_data0

    7
    @DespairFactor is there any chance we could ever see a kernel for the 2 from you again? I'm following the magic you're doing on the Nexus 6P, and it really makes me jealous. I would instantly jump to the 6P if it weren't starting at 649€ in Germany :(

    Perhaps, I would need to get some real testing going though from users.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone