[Kernel][E5823] Stock Kernel + SafetyNet Patch + DRM Fix /Nougat 2.33 & 0.160

[GreyLeshy]

Stock Kernel + SafetyNet Patch + DRM Fix​

Use case for this kernel:
- If you want to stay completely stock, but have an unlocked bootloader, the SafetyNet is tripped which disables features such as Android Pay.
- This kernel is completely stock except for the addition of a patch that removes the SafetyNet check.
- This will not prevent SafetyNet from tripping for other reasons, like rooting.
- Now You can use Android Pay with an unlocked bootloader.

Installation:
- Installation using TWRP
- Installation via the bootloader

fastboot flash boot boot.img

Downloads: Dropbox; AndroidFileHost

Sourse: 32.3.A.2.33; 32.4.A.0.160; 32.4.A.1.54

I compiled the stock kernel and applied the SafetyNet patch by sultanxda.

DISCLAIMER:
No one is responsible for any damage caused to your device except You. You have been warned.

TWRP 3.1.1 for Xperia Z5, Z5C, Z3+
Vulkan API for Adreno 430

 

[NeoBeum]

There's a better way than using the boot partition. If you use the ramdisk method, and get it to a recovery partition, you can do almost anything back and forth without having to change boot images. you can just flash over everything and still maintain your recovery partition.
https://forum.xda-developers.com/showthread.php?t=3588365
https://forum.xda-developers.com/showthread.php?t=3609358

 

[GreyLeshy]

@NeoBeum
At me on stock firmware of Magisk, doesn't hide SafetyNet and therefore I compiled this kernel.

 

[NeoBeum]

@NeoBeum
At me on stock firmware of Magisk, doesn't hide SafetyNet and therefore I compiled this kernel.

grab the recovery image I made and then flash it to recovery while you're using your kernel, then flash magisk I the fota/recovery partition recovery, then magisk will be able to capture the sepolicy it needs, then you should be able to flash a full ftf excluding FOTAKernel. to test, you'll have 2 recovery working. the one that's in the boot img, and recovery img.
I had this at the start, and once I got recovery to the recovery partition, ive been free to flash anything if I exclude the fotakernel wipe.

I had to add the fstab for the older Android versions. but I haven't included that in the prebuilt recovery.


magisk only needs to capture a pure system and boot image once, and it mirrors it. after that, you can load up modified kernels

 

[emosis]

IT s nice to see A kernel for nougat..
What about other functions of kernel? All stock?

 

[GreyLeshy]

What about other functions of kernel?

In the future, if I have the desire, then I will make a custom kernel with improvements.
The first will be a raised version of the kernel with 3.10.84 to 3.10.105.

All stock?

What do You mean?

 

[reevdre]

Can i flash and working with LOS 14.1?

 

[GreyLeshy]

Can i flash and working with LOS 14.1?

The kernel is only for stock firmware!
On other firmware, the stability is not guaranteed.

 

[NeoBeum]

Can i flash and working with LOS 14.1?

if they haven't made a recovery for LOS, I'll have a recovery twrp port for it after the Z5C gets official support for the Omni base, AOSP is completed, but there's no room on their build server for new AOSP devices

 

[dlee390]

Can you update this for .160? I have the kernel. Thanks!

 

[GreyLeshy]

Can you update this for .160? I have the kernel.

Sony did not post the kernel sources. dev

 

[dlee390]

oh ok thanks!

 

[dlee390]

also, why doesn't this work with magisk like your other kernels for z5p and z5? thanks!

 

[GreyLeshy]

also, why doesn't this work with magisk like your other kernels for z5p and z5? thanks!

Use magisk v13.

 

[GreyLeshy]

Upd 32.4.A.0.160

 

[frager45]

Need update for 32.4.A.1.54 rom

 

[GreyLeshy]

Need update for 32.4.A.1.54 rom

Well, I'll do it!

 

[GreyLeshy]

Upd 32.4.A.1.54.

 

[frager45]

Upd 32.4.A.1.54.

Thnaks, but wi-fi not opening...
I try press on button but not pressing...

 

[GreyLeshy]

Thnaks, but wi-fi not opening...
I try press on button but not pressing...

Provide a screenshot of the terminal command lsmod.