[KERNEL] ElementalX-N6 4.27 (Nougat) 5.05 (Oreo)
- Thread starter flar2
- Start date
- learn to live with facts and hardware limitations. you got your answer, now live with it because it was the absolutely correct and logical reply.
- nexus 6 comes with SD805 not 810 and 810 throttles way earler due to famous thermal issues, this in case that you have another device with an 810 and post in the wrong thread (don't say it's like that, just in case)
- you can learn to change throttling thresholds/parameters, i did it that way on my OP2 because i don't fear hot devices. My laptops get way hotter and survive for over 5 years till something gives way and my OP2 is already many years old without throttling and works perfectly fast and well on second battery.
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
333ElementalX Kernel
for Nexus 6 (shamu)
Features
- Easy installation and setup with AROMA installer
- Best balance of performance and battery life
- Advanced color control
- USB fastcharge (optional)
- Sweep2sleep (optional)
- Sweep2wake and doubletap2wake (optional)
- Wake Gestures app support
- MultiROM support
- disable fsync (optional)
- adjustable vibration strength
- sound control
- Underclock or overclock CPU
- voltage control
- NTFS read/write and exFAT support
- init.d support
- No forceencrypt
Google+ Community
Installation
1. Flash in recovery
For maximum compatibility with all ROMs, ElementalX uses your existing ramdisk.
Do NOT flash this over other custom kernels!
You should only flash ElementalX over the kernel that came with your ROM!!!
Download
Android 8.1.0 (Oreo)
ElementalX-N6-5.05
Android 7.0, 7.1, 7.1.1, 7.1.2 (Nougat)
ElementalX-N6-4.27
Android 6.0.1 (Marshmallow)
ElementalX-N6-3.19
Note: 3.19 is for ROMs with July security patches or later! Please use 3.16 if WiFi doesn't work
Source
https://github.com/flar2/shamu
_____________________________________
XDA:DevDB Information
ElementalX-N6, Kernel for the Nexus 6
Contributors
flar2
Source Code: https://github.com/flar2/shamu
Kernel Special Features:
Version Information
Status: Stable
Created 2014-11-27
Last Updated 2018-01-3170Notes
Sweep2wake:
disable = 0
sweep right = 1
sweep left = 2
sweep up = 4
sweep down = 8
Add them together. For example, to enable sweep2wake in every direction:
echo 15 > /sys/android_touch/sweep2wake
Sweep2sleep:
disable = 0
sweep right = 1
sweep left = 2
sweep left or right = 3
eg: enable sweep2sleep left
echo 2 > /sys/android_touch/sweep2sleep
Doubletap2wake:
enable = 1
disable = 0
eg: enable doubletap2wake:
echo 1 > /sys/android_touch/doubletap2wake66Update!!!
-Add camera launch gesture, activated by swiping down when the screen is off. For this to work, you must have "Press power button twice for camera" enabled in settings. All the same caveats as other wake gestures apply to this feature.
-Fix reboot if wake gesture is enabled and screen times out right after boot
-Prevent BCL driver from hotplugging (I think this will fix the third and fourth cores coming back online with performance gov)
-Fix elementalx.conf, it wasn't saving properly for use with express version (express version wasn't keeping settings)
Download:
ElementalX-N6-3.08
Changes:
-add camera launch gesture
-improve stability
-stop BCL hotplug
-fix elementalx.conf/express version49Update!!!
Download (Nougat)
ElementalX-N6-4.08
Download (Marshmallow)
ElementalX-N6-3.20
Changes:
-October security update
-add zen io scheduler43Update!!!
I have removed the enforcing option from the installer. Selinux is enforcing by default, just as it was before. Removing this option will allow you to use setenforce again. There is no reason to run in permissive mode, but if you must, then use the permissive.zip found here: https://www.androidfilehost.com/?fid=23991606952602503
Download:
ElementalX-N6-3.10
Changes:
-remove enforcing option (use permissive.zip if necessary)
-increase default input boost time
