Sorry, but that won't happen here. The G800H has a completely different processor. So, for supporting it you need to own it. I don't think anybody would build a kernel just out of curiosity. If you're one of the few fellas who happen to own this rare type of phone, you should build the kernel yourself and share it with the community.Please support g800h. G800h don't have any kennel for android 6.
USB-OTG is available on the stock kernel. Open the advanced Settings app and click USB-OTG mode.Can someone confirm that this kernel is still recommended? (I think it is but I'm not sure)
What about USB-otg? Can your Kernel fix it? I heard it can be activated and it isn't hardware-sided (Just turned off)
If this kernel doesn't enable usb-otg, are there other ones?
Edit: "For all 7.x custom ROMS"
Yeah,others have had this issue. I'm not sure why. Either way...Open up the kernel zip in an archive manager (DO NOT extract) Then open the anykernel.sh file in a text editor. Change the line at the top that reads "do.devicecheck=1" to "do.devicecheck=0" It will flash fine after this.i understand if there is no more support. but i want to install this kernel but i get "unsupported device" error. i am flashing with the correct recovery (twrp-3.2.3-0-kminilte) but i still get this error. it does flash roms, but not this kernel. am i doing something wrong? hope someone can help me
USB-OTG is available on the stock kernel. Open the advanced Settings app and click USB-OTG mode.
Yeah,others have had this issue. I'm not sure why. Either way...Open up the kernel zip in an archive manager (DO NOT extract) Then open the anykernel.sh file in a text editor. Change the line at the top that reads "do.devicecheck=1" to "do.devicecheck=0" It will flash fine after this.
WireGuard is not available for our kernel version (3.4) Its 3.10 and above. I looked into this awhile ago.
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this kernel * before flashing it! YOU are choosing to make these modifications, DO NOT * point the finger at me for messing up your device. * this kernel is only for the S5 mini SM-G8OOF/M/Y (Exynos) Do Not Flash this on any other device! */
- Setting alucard hotplug along with certain other governors at boot via kernel adiutor etc can cause a reboot after setting is applied. So be certain to set the "delay" time in kernel adiutor or similar to 10 seconds or more,so if you have this you are able to cancel and change after a reboot.
- There is a chance of some settings being reset after flashing the kernel (quick setting,sound,statusbar etc.) This is rather insignificant and all settings that have been changed can be set back in minutes.
I HIGHLY recommend that you do a full backup before flashing this kernel. I am not responsible if you lose any or all of your data.
2.Place the zip onto your phones storage
3.Reboot into recovery (Volume-Up + Home + Power button)
5.Flash the downloaded kernel
6.Go back a few times in TWRP Select wipe -> Advanced wipe and wipe Dalvik/Art cache and the cache partition.
If you do not do this you are very likely to experience strange issues.You have been warned.Do not report problems if you did not do this.
Feedback can also be posted[URL="https://github.com/Spookcity/ROMS-G800F/issues/12"]-------> Here[/URL] Test builds will be released [URL="https://github.com/Spookcity/ROMS-G800F/issues/22"]-------> Here[/URL]
[URL="https://www.androidfilehost.com/?fid=745425885120759188"]Version 5.0[/URL] [URL="https://www.androidfilehost.com/?fid=889764386195920916"]Version 4.0[/URL] [URL="https://www.androidfilehost.com/?fid=673368273298972709"]Version 3.0[/URL] [URL="https://www.androidfilehost.com/?fid=889764386195913162"]Version 2.0[/URL] [URL="https://www.androidfilehost.com/?fid=889764386195911617"]Version 1.0[/URL]
01-09-2017 - Released Version 6.0 - Added MSM Sleeper hotplug - Reduced vm_swappiness from 60 to 20 - Added intellidemand governor - Added autoSMP hotplug - Added CPU boost driver - Proc: much faster /proc/vmstat - Cpufreq: Persist cpufreq time in state data across hotplug - Reverted "enable arch power" - mm: remove noisy remainder of the scan_unevictable interface - net/socket.c: fix: warning: 'sock/sock1/sock2' may be used uninitialized in this function 01-09-2017 - Released Version 5.0 - Removed ROW I/O scheduler - Added I/O scheduler switcher by sultanxda - Added PIE net scheduler - Added support for USB keyboards - Properly enabled faux123's powersuspend v2.5 - Added dynamic fsync - Added optimization flags for the GPU - Enabled AIO - Reverted a couple of HZ related commits - Added intelliactive governor - Added intelliplug hotplug driver - Added thunderplug hotplug driver - Added Dynamic management of dirty page writebacks - Fixed voltage control on 1500MHZ version - Fixed alucard governor - Fixed ondemandplus governor - Fixed bluactive governor - ib/int_sqrt.c: optimize square root algorithm - af_unix: speedup /proc/net/unix - wireless - bcmdhd - reduce scan dwell time to reduce power usage - bcmdhd reduce wakelocks - readahead: make context readahead more conservative - block/partitions: optimize memory allocation in check_partition() - power: make sync on suspend optional - block: bfq-iosched: tuning for SSD 05-08-2017 - Released Version 4.0 - Added 1.5GHZ version - Added voltage control - DriveDroid support - Implemented zen-tune v4.5 - Full CIFS support - Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues - Added Fsync on/off - Added ROW I/O sheduler - Added BFQ-v7r8 I/O scheduler for 3.4 kernel - Added Blu_active CPU governor - block: disabled add_random - tweaked build flags - many workqueue related patches - tcp: tweaked for speed - CONFIG_HZ=300 - fs/proc/array.c: make safe access to group_leader - disabled debugfs 19-07-2017 - Released Version 3.0 -GPU overclocked to 600MHZ -Updated Sqlite3 to version 3.19.3 from 06-08-2017 Added CPU governors -bioshock -pegasusq -smartmax -alucard -alucard hotplug -Added the rest of the TCP congestions -cpufreq: Move get_cpu_idle_time() to cpufreq.c -Fixed all the CPU governors to work properly with the Move get_cpu_idle_time -Added /dev/frandom support -cpufreq: Introduce new relation for freq selection -lib/memcopy: use glibc version -lib/string: use glibc version - 03-07-2017 - Released Version 2.0 -GPU overclocked to 533MHZ Added CPU governors -dancedance -darkness -hyper -lionheart -ondemandplus Added IO schedulers -fifo -tripndroid Added many TCP congestions -reno -vegas -westwood -etc. 26-06-2017 - Fix "unsupported device" when flashing in TWRP 184.108.40.206 23-06-2017 - Initial release