[KERNEL][GB/SENSE] 2.6.35.10-g3f43272 [v06] | OC1152 | LZMA | fixes +addtl modules

[TomLeeDesire]

Had a spontaneous reboot this morning, but as it was in my pocket, I'm not sure if it can be an unwanted long press on power button :S
Got the last_kmsg if it can help.

Then later, trying some gscript to test (had a freeze using it on a previous version), i had a freeze again (pull out, no last_kmsg). I checked vdd levels twice, went fine, then I checked the sd scheduler. Freeze.
I tried again after reboot. Check Sd scheduler, freeze. But maybe my script isn't correct anymore :S
cat /sys/block/mmcblk0/queue/scheduler

111003 on latest Lee HD port

 

[rjvrijn]

To those complaining about the usb-popup bug, snq- said a few messages ago that it was a bug with newer android versions (2.3.4 and 2.3.5) and he said he's working on it.

Ah ok. But for those of us with Android 2.3.3. Fastboot oem eraseconfig should solve this. Just retest the whole thing.

Sent from my HTC Desire using XDA App

 

[tobi01001]

@snq-
Got another - for now maybe final - one:

static int get_ls_adc_level(uint8_t *data)
{
	struct microp_ls_info *li = ls_info;
	uint8_t i, adc_level = 0;
	uint16_t adc_value = 0;
	[COLOR="Blue"][B]static uint16_t old_value = 0;[/B][/COLOR]


	data[0] = 0x00;
	data[1] = li->ls_config->channel;
	if (microp_read_adc(data))
		return -1;

	read_spi_status();

	adc_value = [B][COLOR="Blue"]old_value = [/COLOR][/B]ls_info->lsauto ? (data[0]<<8 | data[1]) :[B][COLOR="Blue"] old_value;[/COLOR][/B]

Reasoning: If the screen uses the last value when it will be turned on, why shouldn't the light sensor report the last one...

 

[siliconaddict]

Have been using the bravo-2.6.35.14-snq-111003-no2wcr kernel for a day now. Snappy! And excellent battery life:
1mA with airplane mode and screen off
3-9mA with 3G on and screen off
130-270mA with 3G on and browsing/Tapatalk/Twidroyd
170-320mA with WiFi on and browsing/Tapatalk/Twidroyd

So WiFi has a slightly higher drain than 3G on my phone.

And I don't have the USB option window issue.

Great job, snq-!

 

[resadent]

Ah ok. But for those of us with Android 2.3.3. Fastboot oem eraseconfig should solve this. Just retest the whole thing.

Sent from my HTC Desire using XDA App

My bad, I tried to be too clever
BTW, have to say latest kernel ia the fastest yet on my desire. No stability problema for now, excellent batt life... great job snq-.

 

[rabeel]

Have been using the bravo-2.6.35.14-snq-111003-no2wcr kernel for a day now. Snappy! And excellent battery life:
1mA with airplane mode and screen off
3-9mA with 3G on and screen off
130-270mA with 3G on and browsing/Tapatalk/Twidroyd
170-320mA with WiFi on and browsing/Tapatalk/Twidroyd

So WiFi has a slightly higher drain than 3G on my phone.

And I don't have the USB option window issue.

Great job, snq-!

which app do u use to track battery usage?

 

[Gr4bov5ky]

I've flashed the bravo-2.6.35.14-snq-111003 kernel, the wifi wasn't workin couldn't connect. Not even with the wifin update... About 200mA when phone was idle, only screen on.

Flashed kernel 110926....wifi isn't still working.. OMG

Any ideas?

 

[siliconaddict]

Have been using the bravo-2.6.35.14-snq-111003-no2wcr kernel for a day now. Snappy! And excellent battery life:
1mA with airplane mode and screen off
3-9mA with 3G on and screen off
130-270mA with 3G on and browsing/Tapatalk/Twidroyd
170-320mA with WiFi on and browsing/Tapatalk/Twidroyd

So WiFi has a slightly higher drain than 3G on my phone.

And I don't have the USB option window issue.

Great job, snq-!

Spoke too soon... Total freeze! Had to pull the battery. Back to the 110926 kernel.

Sent from my HTC Desire using xda premium

 

[gregsoir]

I've flashed the bravo-2.6.35.14-snq-111003 kernel, the wifi wasn't workin couldn't connect. Not even with the wifin update... About 200mA when phone was idle, only screen on.

Flashed kernel 110926....wifi isn't still working.. OMG

Any ideas?

full wipe and reflash everything again?

btw, i just had one freeze, had to pull the battery out. apart from that kernel runs smooth and battery is fine after full wipe

 

[Gr4bov5ky]

full wipe and reflash everything again?

btw, i just had one freeze, had to pull the battery out. apart from that kernel runs smooth and battery is fine after full wipe

I've wiped everything that could be wiped,reflashed everything..WiFi isn't working...

Update: Don't know why...it's working

Now with 111003, fast and stable. Let's see the battery life.

 

[tomurbanowicz]

I'm back to 110911 and I have question: is there any possibility to add mod lightsensor with 10 level to this kernel?

 

[shura_k]

I'm back to 110911 and I have question: is there any possibility to add mod lightsensor with 10 level to this kernel?

agree +100000

 

[snq-]

A little ot, but can you please make a froyo kernel with the autobrightness mod?

hey, sorry for the delay in releasing this, but i found some upstream code that caused reproducible (\o/) insta-crash (radio!), still investigating whether they have anything to do with the gb issues (looking at it this way, your req wasn't o/t )


again, this is for froyo
bravo-2.6.32.46-snq-111004.zip
(contains tobi's latest one, all credits to him for the lightsensor mod!, smartass updated to v2, compiled w/ gcc 4.6)

modified sources here

 

[snq-]

Could I ask why are you using 1.0.9 and not latest one? Isn't 1.1.3-1.1.4 the best avaiable?

it's just i haven't had the time to upgrade recently
i'm pretty sure the newer versions are better (afaik baadnwz fixed the reboot-while-taking-photos issue, etc)

 

[snq-]

Got the last_kmsg if it can help.

is there something like "ARM9 has CRASHED" at the end?

 

[chrismast]

running now the new kernel (111003) on IC 1.1.4 with WifiN: no issues with Wifi connectivity, overall phone runs smooth, no issues with FC or restarts yet. Thanks snq!

 

[snq-]

Reasoning: If the screen uses the last value when it will be turned on, why shouldn't the light sensor report the last one...

love your static local
you can test it by fastbooting the froyo build's zImage for now (works ok on a gb rom)

 

[tobi01001]

love your static local
you can test it by fastbooting the froyo build's zImage for now (works ok on a gb rom)

Already tested it with tristan202's source and a fastboot zImage... Works well... Just waiting for your GB git. But it's good to see that the froyo guy's get a taste of 10 sensor levels... I wonder how services.jar is implemented on froyo.

Sent from my HTC Desire using xda premium

 

[anderl78]

hey, sorry for the delay in releasing this, but i found some upstream code that caused reproducible (\o/) insta-crash (radio!), still investigating whether they have anything to do with the gb issues (looking at it this way, your req wasn't o/t )


again, this is for froyo
bravo-2.6.32.46-snq-111004.zip
(contains tobi's latest one, all credits to him for the lightsensor mod!, smartass updated to v2, compiled w/ gcc 4.6)

modified sources here

Wow! Thank you very much for this! The frojo user will have a lot of fun with this!

Sent from my HTC Desire using XDA App

 

[anderl78]

Already tested it with tristan202's source and a fastboot zImage... Works well... Just waiting for your GB git. But it's good to see that the froyo guy's get a taste of 10 sensor levels... I wonder how services.jar is implemented on froyo.

Sent from my HTC Desire using xda premium

I guess, HTC made the same in GB as in frojo... Let's see... If I find a little bit more time I will look into it... ;-)

The now available 10 levels is for sure a big improvement for the frojo guys!

Sent from my HTC Desire using XDA App