【Kernel】Google Pay Edition 6.0 Kernel For Full M8

Search This thread

cr1960

Senior Member
May 15, 2007
1,632
423
Melbourne
So I went to Weibo and found this explanation...
It's from Google Translate (and doesn't make much sense to me). Maybe someone can work it out....

Go here to download the main ROM: http://forum.xda-developers.com/showthread.php?t=2708589 after brushing brush into the whole model S.ROM-M8-GPE6.0-M8-FullBoot-based -Sense (5.0+) dtb.zip to boot. Note: This whole model kernel 5.0.x Sense DTB-based firmware, so firmware 5.0.1 (4.4.4 may also be used) or more M8, including the M8 dual card support is turned on, but the decision is available dual card system, Under the present circumstances there is no dual card GPE m8 dual cards are not compatible with the brush into. The system defaults to GSM / WCDMA / LTE support, telecommunications users do not brush into. If this is ignored piracy under this boot as the first full-model 6.0. Please wait M Sense7 http://pan.baidu.com/s/1kTETk2b
 

topjohnwu

Senior Recognized Developer / Recog. Contributor
Jan 31, 2012
1,849
60,982
Taipei
OK, I'm here to translate it much clearly. Also uploaded in attachment for convenience.
Please download the rom here:
http://forum.xda-developers.com/showthread.php?t=2708589

After flashing S.ROM-M8-GPE6.0-M8-FullBoot-based-Sense(5.0+)dtb.zip, it should boot.

Note: This all-model kernel is based on 5.0.x Sense DTB, so using firmware higher than 5.0.1 should be compatible. By using this kernel, all models should be able to boot, even include dual sim models. Although it boots, whether the network is usable is determined on the system, by now there is no GPE rom which support dual sim models. The system default network is GSM/WCDMA/LTE, so CDMA is not supported.

If there is no people stealing my work, this should be the first all-model-boot for 6.0

"Please wait for M Sense 7"
The last sentence is making me so excited :)
 

Attachments

  • S.ROM-M8-GPE6.0-M8-FullBoot-Sense(5.0+)dtb.zip
    8.8 MB · Views: 212

topjohnwu

Senior Recognized Developer / Recog. Contributor
Jan 31, 2012
1,849
60,982
Taipei
Let me see if I got this right .... I can flash the hoe Rom on a sense based firmware without converting my device to GPE ? Is that what is this for?? Please....

Sent from my HTC One_M8 using Tapatalk
If you're GSM, install the rim is just fine. This kernel is for other models such as dual sim.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 23
    S-ROM M8 Sense7 FullDtb+Stock GPE Kernel=GPE Full M8 boot

    Compatible with firmware:5.0.x Sense+

    Download:

    http://pan.baidu.com/s/1kTETk2b
    10
    OK here are the root enabled based on sun_dream's work.
    For instructions please take a look at my thread
    Include stock and traditional root and systemless root in attachment.
    Please test and report, I haven't tested them yet.
    7
    OK, I'm here to translate it much clearly. Also uploaded in attachment for convenience.
    Please download the rom here:
    http://forum.xda-developers.com/showthread.php?t=2708589

    After flashing S.ROM-M8-GPE6.0-M8-FullBoot-based-Sense(5.0+)dtb.zip, it should boot.

    Note: This all-model kernel is based on 5.0.x Sense DTB, so using firmware higher than 5.0.1 should be compatible. By using this kernel, all models should be able to boot, even include dual sim models. Although it boots, whether the network is usable is determined on the system, by now there is no GPE rom which support dual sim models. The system default network is GSM/WCDMA/LTE, so CDMA is not supported.

    If there is no people stealing my work, this should be the first all-model-boot for 6.0

    "Please wait for M Sense 7"
    The last sentence is making me so excited :)
    5
    Hello, for people using non-GSM phones(such as Verizon), please take a look at my updated thread.
    It contains this all-model support in the pre-packed rom!!
    [ROOT][ROM] Marshmallow GPE (System/Systemless) (wp_mod) (All variants)
    2
    Hi. Tried flashing your pre rooted zip on my sprint using the sun dream kernel but it only leaves the boot animation screen when I select no root. When it's rooted it never leaves the boot animation. Any help?

    Because root requires sepolicy modification. I'll try to make one in my free time.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone