Search This thread

franciscofranco

Recognized Developer
Dec 9, 2010
24,725
136,405
Carcavelos
I hate big OPs.

Works on all roms. r390 and newer versions are ONLY for 4.3 or newer.

F.A.Q:
1. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg on pastie.org.
2. Battery sucks, my device is not entering deep sleep. FIX PLOX!
A: Fix it yourself, it's an app waking your device up not the kernel's problem
3. Signal is dropping since I flashed the kernel, amg u sucks!
A: The kernel has nothing to do with gsm/cmda signal. Make sure you have the latest radios
4. Do I need to wipe anything when flashing this kernel?
A: No.
5. Does this kernel has X or Y mod?
A: Learn to read, everything you need to know is in the features list, changelog or public repo.

Downloads:
4.3: http://192.241.177.15/GalaxyNexus/4.3/
4.4: http://192.241.177.15/GalaxyNexus/4.4/

Kernel changelog:
http://192.241.177.15/GalaxyNexus/4.3/appfiles/changelog.xml

Source:
https://github.com/franciscofranco/Tuna_JB_pre1/tree/nightlies-4.3

franco.Kernel updater Free apk: http://forum.xda-developers.com/showthread.php?t=1867127

 
Last edited:

franciscofranco

Recognized Developer
Dec 9, 2010
24,725
136,405
Carcavelos
[KERNEL][GPL][5 JUN - #Milestone 4][r200-ICS r210-JB] franco.Kernel | 4.0.3/4 |

Terminal commands for all the options in this kernel:

Color Multipliers:

echo r g b > /sys/class/misc/colorcontrol/multiplier

Replace r g and b for 2000000000 for stock color. If you want to change the colors just replace the first 3 numbers of each r/g/b with 0-400 of your choice.

Gamma Control:

echo r g b > /sys/class/misc/colorcontrol/v1_offset

Replace r/g/b by -255/200 of your choice.

Fsync:

echo 1 > /sys/module/sync/parameters/fsync_enabled - to enable

echo 0 > /sys/module/sync/parameters/fsync_enabled - to disable

Sound Control:

echo i > /sys/devices/virtual/misc/soundcontrol/volume_boost

Replace i with 0-3 of your choice.

Sound High Performance:

echo 1 > /sys/devices/virtual/misc/soundcontrol/highperf_enabled - to enable

echo 0 > /sys/devices/virtual/misc/soundcontrol/highperf_enabled - to disable

USB Fast Charge:

echo 1 > /sys/kernel/fast_charge/force_fast_charge - to enable

echo 0 > /sys/kernel/fast_charge/force_fast_charge - to disable

wifi_pm:

echo 1 > /sys/module/bcmdhd/parameters/wifi_pm - to enable

echo 0 > /sys/module/bcmdhd/parameters/wifi_pm - to disable

Trinity's Contrast:

echo i > /sys/module/panel_s6e8aa0/parameters/contrast

Replace i with -25/16 of your choice.

BLX:

echo i > /sys/class/misc/batterylifeextender/charging_limit

Replace i with 0-100 of your choice.

OMAP Gamma interface:

echo i > /sys/devices/platform/omapdss/manager0/gamma

Replace i with 5-10 of your choice.

Thermal Throttle:

echo 1 > /sys/module/omap_temp_sensor/parameters/throttle_enabled - to enable

echo 0 > /sys/module/omap_temp_sensor/parameters/throttle_enabled - to disable

TCP Congestion Algorithm interface

To check all the available options:

sysctl net.ipv4.tcp_available_congestion_control

To change to other option:

sysctl -w net.ipv4.tcp_congestion_control=NAME_OF_THE_ALGORITHM

Detailed test of all the algorithms:
Latency - Download - Upload

cubic:
1st run: 15ms - 10,75Mbps - 7,82Mbps
2nd run: 14ms - 10,84Mbps - 8,06Mbps

reno:
1st run: 13ms - 15,51Mbps - 6,73Mbps
2nd run: 13ms - 14,73Mbps - 8,51Mbps

bic:
1st run: 12ms - 10,38Mbps - 8,61Mbps
2nd run: 13ms - 10,78Mbps - 8,62Mbps

westwood:
1st run: 11ms - 17,65Mbps - 8,30Mbps
2nd run: 13ms - 13,28Mbps - 8,29Mbps

highspeed:
1st run: 13ms - 10,76Mbps - 7,94Mbps
2nd run: 16ms - 14,42Mbps - 8,52Mbps

hybla:
1st run: 14ms - 11,19Mbps - 7,44Mbps
2nd run: 14ms - 13,47Mbps - 7,56Mbps

htcp:
1st run: 14ms - 13,24Mbps - 7,03Mbps
2nd run: 15ms - 10,85Mbps - 8,00Mbps

vegas:
1st run: 14ms - 8,49Mbps - 6,62Mbps
2nd run: 14ms - 12,00Mbps - 7,07Mbps

veno:
1st run: 13ms - 9,58Mbps - 8,13Mbps
2nd run: 13ms - 8,50Mbps - 7,64Mbps

scalable:
1st run: 18ms - 12,01Mbps - 8,73Mbps
2nd run: 14ms - 13,96Mbps - 8,23Mbps

lp:
1st run: 14ms - 14,90Mbps - 8,68Mbps
2nd run: 14ms - 13,44Mbps - 8,72Mbps

yeah:
1st run: 14ms - 13,37Mbps - 8,28Mbps
2nd run: 17ms - 13,89Mbps - 8,14Mbps

illinois:
1st run: 13ms - 12,93Mbps - 8,24Mbps
2nd run: 16ms - 13,97Mbps - 6,46Mbps
 
Last edited:

spences10

Senior Member
Jan 18, 2010
731
50
London
If you don't mind, I compiled boot.img with your kernel and made it as recovery flasahble .zip file so that more users can try it - http://xda3.androidrevolution.nl/db...y Nexus/franciscofranco/Kernel_29.11.2011.zip

Cool, will give it a go - thanks mike1986

Mike do you have any documentation you can share for unpacking the boot image?

Thanks.

---------- Post added at 10:29 AM ---------- Previous post was at 09:31 AM ----------

Cool, will give it a go - thanks mike1986

Mike do you have any documentation you can share for unpacking the boot image?

Thanks.

Ok boots fine, going to try wifi

What else should I test?

---------- Post added at 10:40 AM ---------- Previous post was at 10:29 AM ----------

Ok boots fine, going to try wifi

What else should I test?

I only get 3G reception now as before I got H??

Going to try restore and see if it is the kernel or not, for this I only need to restore the boot right? Or boot and system?

Thanks.
 

mike1986.

Senior Member
Cool, will give it a go - thanks mike1986

Mike do you have any documentation you can share for unpacking the boot image?

Thanks.

---------- Post added at 10:29 AM ---------- Previous post was at 09:31 AM ----------



Ok boots fine, going to try wifi

What else should I test?

---------- Post added at 10:40 AM ---------- Previous post was at 10:29 AM ----------



I only get 3G reception now as before I got H??

Going to try restore and see if it is the kernel or not, for this I only need to restore the boot right? Or boot and system?

Thanks.

Just boot :)
 

spences10

Senior Member
Jan 18, 2010
731
50
London
I only get 3G reception now as before I got H??

Going to try restore and see if it is the kernel or not, for this I only need to restore the boot right? Or boot and system?

Thanks.

Ok I have H again now after restoring boot and system, does that help? Or do you need a logcat of when I'm using the kernel?

Thanks mike1986 I thought it was just boot but did system as well just to be sure
 

franciscofranco

Recognized Developer
Dec 9, 2010
24,725
136,405
Carcavelos
Cool, will give it a go - thanks mike1986

Mike do you have any documentation you can share for unpacking the boot image?

Thanks.

---------- Post added at 10:29 AM ---------- Previous post was at 09:31 AM ----------



Ok boots fine, going to try wifi

What else should I test?

---------- Post added at 10:40 AM ---------- Previous post was at 10:29 AM ----------



I only get 3G reception now as before I got H??

Going to try restore and see if it is the kernel or not, for this I only need to restore the boot right? Or boot and system?

Thanks.

Other than trying the obvious ****s, how does it feel compared to stock? If you can't feel a difference can you benchmark it and tell me if anything changed from stock? I kinda sure hope so, made enough changes for that :p
 

spences10

Senior Member
Jan 18, 2010
731
50
London
Other than trying the obvious ****s, how does it feel compared to stock? If you can't feel a difference can you benchmark it and tell me if anything changed from stock? I kinda sure hope so, made enough changes for that :p

Will do :)

---------- Post added at 12:02 PM ---------- Previous post was at 11:58 AM ----------

Thats odd, bootlooping now??

---------- Post added at 12:24 PM ---------- Previous post was at 12:02 PM ----------

Yeah just restored and tried flashing again and its bootlooping still??
 

franciscofranco

Recognized Developer
Dec 9, 2010
24,725
136,405
Carcavelos
Will do :)

---------- Post added at 12:02 PM ---------- Previous post was at 11:58 AM ----------

Thats odd, bootlooping now??

---------- Post added at 12:24 PM ---------- Previous post was at 12:02 PM ----------

Yeah just restored and tried flashing again and its bootlooping still??

Weird. Can you wipe the caches etc just to be sure? If still bootlooping I'll compile something different later.
 

mskip

Retired Senior Moderator
Mar 20, 2008
12,328
16,064
Norfolk
Can confirm the bootloop on the second flash of your kernel (from the zip mike made). The first flash through recovery went fine and the system booted up without problem. Had wifi and signal but no data and everything was running smoothly.

Rebooted into recovery, restored my backed up boot image and booted back into Android without problem.

Second flash of your kernel resulted in a bootloop at the first google screen (didnt get as far as the animation). Went back into recovery and wiped the cache and still bootlooped. Recovered boot.img from backup and booted fine. I have tried this 3 times now and its bootlooping everytime with your kernel but I dont know why it booted fine the first time..

Hope that was some help.

Mark.
 

franciscofranco

Recognized Developer
Dec 9, 2010
24,725
136,405
Carcavelos
Can confirm the bootloop on the second flash of your kernel (from the zip mike made). The first flash through recovery went fine and the system booted up without problem. Had wifi and signal but no data and everything was running smoothly.

Rebooted into recovery, restored my backed up boot image and booted back into Android without problem.

Second flash of your kernel resulted in a bootloop at the first google screen (didnt get as far as the animation). Went back into recovery and wiped the cache and still bootlooped. Recovered boot.img from backup and booted fine. I have tried this 3 times now and its bootlooping everytime with your kernel but I dont know why it booted fine the first time..

Hope that was some help.

Mark.

Now that is weird. I'll try something different later. Thanks.
 

franciscofranco

Recognized Developer
Dec 9, 2010
24,725
136,405
Carcavelos
Doing a cleaner build now since I got two reports of bootloops when this condition was met:

1 - Flash my kernel. System booted fine
2 - Restore original boot.img
3 - Reboot fine
4 - Flash my kernel back. Bootloop

As I don't the device I'm going step by step. I wanna make sure its stable with a few tweaks, then adding all my gizmos.

This will get updated very frequently in the next days as I start to get feedback.
 

mskip

Retired Senior Moderator
Mar 20, 2008
12,328
16,064
Norfolk
Doing a cleaner build now since I got two reports of bootloops when this condition was met:

1 - Flash my kernel. System booted fine
2 - Restore original boot.img
3 - Reboot fine
4 - Flash my kernel back. Bootloop

As I don't the device I'm going step by step. I wanna make sure its stable with a few tweaks, then adding all my gizmos.

This will get updated very frequently in the next days as I start to get feedback.
Im on here quite regularly and more than willing to help if you need it. Just let me know when theres a new version to test :)

Mark.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1562
    I hate big OPs.

    Works on all roms. r390 and newer versions are ONLY for 4.3 or newer.

    F.A.Q:
    1. My device rebooted or crashed, how can I help?
    A: Get me /proc/last_kmsg on pastie.org.
    2. Battery sucks, my device is not entering deep sleep. FIX PLOX!
    A: Fix it yourself, it's an app waking your device up not the kernel's problem
    3. Signal is dropping since I flashed the kernel, amg u sucks!
    A: The kernel has nothing to do with gsm/cmda signal. Make sure you have the latest radios
    4. Do I need to wipe anything when flashing this kernel?
    A: No.
    5. Does this kernel has X or Y mod?
    A: Learn to read, everything you need to know is in the features list, changelog or public repo.

    Downloads:
    4.3: http://192.241.177.15/GalaxyNexus/4.3/
    4.4: http://192.241.177.15/GalaxyNexus/4.4/

    Kernel changelog:
    http://192.241.177.15/GalaxyNexus/4.3/appfiles/changelog.xml

    Source:
    https://github.com/franciscofranco/Tuna_JB_pre1/tree/nightlies-4.3

    franco.Kernel updater Free apk: http://forum.xda-developers.com/showthread.php?t=1867127

    203
    [KERNEL][GPL][5 JUN - #Milestone 4][r200-ICS r210-JB] franco.Kernel | 4.0.3/4 |

    Terminal commands for all the options in this kernel:

    Color Multipliers:

    echo r g b > /sys/class/misc/colorcontrol/multiplier

    Replace r g and b for 2000000000 for stock color. If you want to change the colors just replace the first 3 numbers of each r/g/b with 0-400 of your choice.

    Gamma Control:

    echo r g b > /sys/class/misc/colorcontrol/v1_offset

    Replace r/g/b by -255/200 of your choice.

    Fsync:

    echo 1 > /sys/module/sync/parameters/fsync_enabled - to enable

    echo 0 > /sys/module/sync/parameters/fsync_enabled - to disable

    Sound Control:

    echo i > /sys/devices/virtual/misc/soundcontrol/volume_boost

    Replace i with 0-3 of your choice.

    Sound High Performance:

    echo 1 > /sys/devices/virtual/misc/soundcontrol/highperf_enabled - to enable

    echo 0 > /sys/devices/virtual/misc/soundcontrol/highperf_enabled - to disable

    USB Fast Charge:

    echo 1 > /sys/kernel/fast_charge/force_fast_charge - to enable

    echo 0 > /sys/kernel/fast_charge/force_fast_charge - to disable

    wifi_pm:

    echo 1 > /sys/module/bcmdhd/parameters/wifi_pm - to enable

    echo 0 > /sys/module/bcmdhd/parameters/wifi_pm - to disable

    Trinity's Contrast:

    echo i > /sys/module/panel_s6e8aa0/parameters/contrast

    Replace i with -25/16 of your choice.

    BLX:

    echo i > /sys/class/misc/batterylifeextender/charging_limit

    Replace i with 0-100 of your choice.

    OMAP Gamma interface:

    echo i > /sys/devices/platform/omapdss/manager0/gamma

    Replace i with 5-10 of your choice.

    Thermal Throttle:

    echo 1 > /sys/module/omap_temp_sensor/parameters/throttle_enabled - to enable

    echo 0 > /sys/module/omap_temp_sensor/parameters/throttle_enabled - to disable

    TCP Congestion Algorithm interface

    To check all the available options:

    sysctl net.ipv4.tcp_available_congestion_control

    To change to other option:

    sysctl -w net.ipv4.tcp_congestion_control=NAME_OF_THE_ALGORITHM

    Detailed test of all the algorithms:
    Latency - Download - Upload

    cubic:
    1st run: 15ms - 10,75Mbps - 7,82Mbps
    2nd run: 14ms - 10,84Mbps - 8,06Mbps

    reno:
    1st run: 13ms - 15,51Mbps - 6,73Mbps
    2nd run: 13ms - 14,73Mbps - 8,51Mbps

    bic:
    1st run: 12ms - 10,38Mbps - 8,61Mbps
    2nd run: 13ms - 10,78Mbps - 8,62Mbps

    westwood:
    1st run: 11ms - 17,65Mbps - 8,30Mbps
    2nd run: 13ms - 13,28Mbps - 8,29Mbps

    highspeed:
    1st run: 13ms - 10,76Mbps - 7,94Mbps
    2nd run: 16ms - 14,42Mbps - 8,52Mbps

    hybla:
    1st run: 14ms - 11,19Mbps - 7,44Mbps
    2nd run: 14ms - 13,47Mbps - 7,56Mbps

    htcp:
    1st run: 14ms - 13,24Mbps - 7,03Mbps
    2nd run: 15ms - 10,85Mbps - 8,00Mbps

    vegas:
    1st run: 14ms - 8,49Mbps - 6,62Mbps
    2nd run: 14ms - 12,00Mbps - 7,07Mbps

    veno:
    1st run: 13ms - 9,58Mbps - 8,13Mbps
    2nd run: 13ms - 8,50Mbps - 7,64Mbps

    scalable:
    1st run: 18ms - 12,01Mbps - 8,73Mbps
    2nd run: 14ms - 13,96Mbps - 8,23Mbps

    lp:
    1st run: 14ms - 14,90Mbps - 8,68Mbps
    2nd run: 14ms - 13,44Mbps - 8,72Mbps

    yeah:
    1st run: 14ms - 13,37Mbps - 8,28Mbps
    2nd run: 17ms - 13,89Mbps - 8,14Mbps

    illinois:
    1st run: 13ms - 12,93Mbps - 8,24Mbps
    2nd run: 16ms - 13,97Mbps - 6,46Mbps
    167
    Just woken up and feel like my head is going to explode already this last 5 pages is crazy

    haha. It's been a crazy two days. :) But it's been a blast.

    Now, sleep is over, time to get back to work!

    I got these from that thread:

    so it makes much sense, to make the min_sample_time as low as possible (?), but how low? what's the most appropriate sample time for battery and performance?

    for the timer_rate, franco suggested 30k to consider the CPUs latency. What has it to do with the cpu's latency?

    he also said min_sample_time doesn't have to be in multiple of timer_rate.
    in my case, all my timers are in 20k, which works fine as of now. But i must be missing some things, because I just saw somebody post these values, and no detailed explanation for having them.

    Yes and no. Here's what we're thinkin' so far.

    THIS POST WILL BE A RECAP OF THE LAST FEW PAGES OF RESEARCH! :)

    This was my original settings that I've been using for weeks:
    above_hispeed_delay: 20000
    go_hispeed_load: 50
    min_sample_time: 40000
    timer_rate: 20000
    So to make the short hand easier, we kept it in that order and just said: 20000/50/40000/20000 became 20k/50/40k/20k became 2/5/4/2. Make sense?

    Here is a breakdown of what they each mean:
    -above_hispeed_delay: Once speed is set to hispeed_freq, wait for this long before bumping speed higher in response to continued high load.
    -go_hispeed_load: The CPU load at which to ramp to the intermediate "hi speed".
    -min_sample_time: The minimum amount of time to spend at a frequency before we can ramp down.
    -timer_rate: Sample rate for reevaluating cpu load when the system is not idle.

    This is a good explanation that I wrote back on page 3038:
    -above_hispeed_delay: higher = better battery, lower = better performance. (100k is default)
    -go_hispeed_load:.......higher = better battery, lower = better performance. (50 is default)
    -min_sample_time:......lower = better battery, higher = better performance. (60k is default)
    -timer_rate:.................higher = better battery, lower = better performance. (20k is default)
    So Google's default is 10/5/6/2. Lower numbers are all better for performance except min_sample_time (there higher is faster). So our goal is to find a sweet spot.

    The default 10 is for "Once speed is set to hispeed_freq, wait for this long before bumping speed higher in response to continued high load." So we think 10 is too high, but if you go too low, then you'll be using the higher freqs a lot more than you need and it will hurt the battery. So we are leaning towards 6 (60000) for above_hispeed_delay.

    The default 5 is for "when the CPU hits X% amount of load, then jump to the hispeed_freq." Again if this one is too low then it will cause the higher freqs to be used more often then they need, so we actually turn go_hispeed_load up a little bit to 7 (70).

    The default 6 is for "how long do I wait before lowering the clock speed from what it's currently at." So the lower we put this, the better battery will be. We're still trying to decide between 3 (30000) and 5 (50000). Osm0sis is getting more lag at lower levels, and finds the best performance mark at 5. So we turn min_sample_time down a little from stock to help with the battery.

    The default 2 is for "wait this long before changing the clockspeeds from what it's at now." While technically 2 sounds better because it's changing more often, Franco believes that by setting the timer_rate to be the same thing as the CPU sample_rate (which is preset at 30000), then that will make the CPU more efficient at switching. So we increased it from 2 (20000) to 3 (30000).

    So TO RECAP: Using the stuff from above, Google's defaults for these settings are 10/5/6/2 and we are changing them to 6/7/3/3 or 6/7/5/3 (again, still testing that third number for the min_sample_time).

    Does that make sense for everyone interested in following along? Any questions? Feel free to try out these settings yourself (the easiest way is with Franco's app or something like Trickster). We want as much feedback as possible on this.
    The next kernel release will have the totally tweaked settings for everyone to test without having to change their own stuff.

    :):D:laugh::good:
    111
    Kernel Emergency Settings Reset Zip

    Alright so here's something that's been requested for awhile.

    I wrote it up recently with Franco's stamp of approval, so I'm posting it here now. Please direct people back to this post from other threads.

    This can/should be everyone's go-to when experiencing problems after updating to a new kernel build, you get stuck in a bootloop, or you think there's a conflict between ROM and kernel (or kernel tweaking app) you can't track down, since likely some leftover settings (voltages, etc.) are at fault. It's also useful if you just want to make sure you're running clean defaults. This should work on any device franco.Kernel and f.Ku support, as well as a variety of other devices, kernels and control apps: eXperience (Free/Pro), GLaDOS Control, TricksterMod, Trinity Kernel Toolbox, ROM Toolbox (Lite/Pro), SetCPU, Faux123 Kernel Enhancement Project, Performance Control and Synapse.

    Flashing this via custom recovery of your choice will delete the kernel app settings file(s), disable init.d and userinit.d scripts by moving them to a subfolder (/system/etc/init.d/off/ and /data/local/userinit.d/off/ respectively) and wipe cache and dalvik-cache for good measure.

    Hopefully it helps!


    Note: If your ROM has a Performance/Tweaking App built-in you should also manually disable any Set On Boot options it has. For example, I couldn't include clearing CM's Advanced Settings since they're built into the main com.android.settings/Settings.apk along with a lot of other Android OS settings (APNs, Developer Options, etc.), so to run clean and without conflicts on CM you need to unset them yourself.

    You should also avoid having more than one control app installed at a time. Conflicts have been reported even with everything "unset" in two apps.

    I also chose not to disable anything your ROM may have in /data/cron or /system/addon.d since some rely on it heavily, so you can choose to review those directories' contents and whether you want to leave them enabled on your own. I also left out disabling sysctl.conf since that's done by f.K and the Franco's Dev Team scripts, and also seemed a bit heavy-handed for this zip script.



    Download counts for the previous versions: 790; 2678.
    105
    Sure. Happy to post my franco.Kernel settings here for anyone who wants to try them. I'll keep these up-to-date if I change them. :)

    These are my f.K settings, my DirtyV settings can be found here.
    Device: Galaxy Nexus
    Max Frequency: 1305 MHz
    Min Frequency: 384 MHz
    Governor: interactive
    Governor Tunables: a_h_d 15000 / g_h_l 95 / h_f 729600 Hz / m_s_t 45000 / t_r 15000 / i_b_f 1036800 Hz / t_l 85 / t_s 80000 / b_d 1000000
    IO Scheduler: row
    IO Scheduler Tunables: h_r_q 100 / r_r_q 75 / h_s_q 5 / r_s_q 4 / r_w_q 4 / l_r_q 3 / l_s_q 2 / r_i 15 / r_i_f 25
    Read Ahead Buffer: 512; NR Requests: 512
    TCP Congestion Avoidance Algorithm: westwood
    Screen Off Max Frequency: 537 MHz

    Color Multipliers: 230 235 340
    RGB Gamma: -4 0 5
    Trinity Contrast: -22; OMAP4 Gamma: 4; CAB: Disabled

    Sent from franco.Kernel updater app:
    https://play.google.com/store/apps/details?id=com.franco.kernel

    The following voltages are just as a reference. DO NOT enter them; your device may not be able to handle them this low, causing freezes and reboots. They are here so that people can compare their stable voltages after following the UV guides linked below, to see how our devices compare. Every device is different, so again, DO NOT enter them.
    mpu_voltages:
    1804mhz: 1425 mV
    1728mhz: 1375 mV
    1612mhz: 1325 mV
    1536mhz: 1275 mV
    1420mhz: 1225 mV
    1305mhz: 1175 mV
    1228mhz: 1125 mV
    1036mhz: 1075 mV
    729mhz: 925 mV
    537mhz: 825 mV
    384mhz: 775 mV
    192mhz: 725 mV

    iva_voltages:
    430mhz: 1125 mV
    332mhz: 1025 mV
    266mhz: 925 mV
    133mhz: 825 mV

    core_voltages:
    512mhz: 1050 mV
    384mhz: 975 mV
    153mhz: 800 mV
    There are some battery savings from UVing but they aren't extreme. If you do not know how UVing works and/or you can't/won't read to properly build your own voltage profile, then just stick with the defaults Franco has already UVed. If you do still want to learn to UV then, once again, everyone should build their own voltage profile for their own device. Read this, this, this, and this for starters on UV methods. You don't know how your device will do until you learn and try.

    As a sidenote, if anyone else wants to share their voltages for comparison the easiest way is to copy the contents of the 3 voltage files (mpu/iva/core) in /sys/class/misc/customvoltage/ - they look (almost) exactly as the sections above.
    Fsync on just in case anything ever happens I want my data protected. That said I do disable it temporarily if I ever want a bit more performance in an app or game. SR is hardcoded disabled in the latest builds.

    The other thing worth noting is I set my color settings on boot with an init.d script. Doing it that way you can end up with a completely different result from the same values. The contrast, blacks and colors are much more natural. Also it's seamless which is nice; they take effect during the Google logo. Attached is my init.d script for that. Alter it to your own color settings, remove the .txt extension, push to /system/etc/init.d/ and set the correct perms; rwxr-xr-x (chmod -R 755 /system/etc/init.d in Terminal Emulator).

    900colorsettings can be found with my other init.d scripts (from Franco Dev Team), here: https://s.basketbuild.com/filedl/devs?dev=osm0sis&dl=osm0sis/scripts/900colorsettings

    Note: On my new replacement screen, setting the color multiplier too early in the boot (any time before the boot animation) made everything look dark, oversaturated, uncontrasted and dusky; basically the opposite of the way it used to work on my old panel. Adding sleep 2; before that line in the init.d script fixed this, so experiment if your panel is more like my new one, and the init.d as-is after you put in your settings makes it look worse.

    [ New init.d script with my new colors. I need the sleep 4 because of my problem in my "Note" above, so comment it out if you don't need it, it will make it look worse. Previous download counts were 1880, 646, and 307. Thanks everyone! ]
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone