[KERNEL][GPL][N4] franco.Kernel - r217

[Zaihanzainal]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

Use the donation link in his app

Me no likey PayPal....

Sent from my Nexus 4 using xda premium

 

[drawde40599]

Another app wouldn't be able to do that because it's not a matter of simple toggle included in the app. Franco once said that his long term goal is to have an option to turn off mpdecisions but for now it's not a priority.

I'd also be happy to see an option to force all cores on, so let's just wait and see where the kernel is heading.

It improves some heavy games' performance. Also performance governor is a no-go for gaming. It'll just heat your phone very quickly and cause thermal throttling.

Ya its not something I would personally do because of those reasons. But throwing out ideas for him

Milestone is smooth and snappy as hell franco, been on data since u dropped it and using phone pretty much whole time and im sitting at 37% battery left with 3 hours SOT so far =O .

Thanks franco

 

[chrisjcks]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

Stock ROM - Franco nightly 102

My usage:

Auto brightness with WiFi
Stock CPU freq / interactive / -100mv
200mb data download
30mins gaming
Lots of Facebook (including a a few photo uploads), messenger and G+
4 gaming screenshots taken
Little bit of browsing
Full carbon backup (app+data) including full box upload.
Few personal photos taken (for walking dead app - fun!)
And finally, a couple YouTube videos watched.

Here are my walking dead photos just for fun....

Me:

Mother: (scarier, I know! LOL)

Brother:

Hahaha



Sent from my Nexus 4 using Tapatalk 2

 

[casonswag]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

"Please don't ask me why" that is how I started my question. Okay, if you really like to know.
My point is smoothness not speed. With r93 there was option to put on line all 4 cores. Back then I tested both ways.What I find out is this. With hot plug I get lag from time to time that first moment until other cores kicks in. With all 4 on line I never get that plus there is no differences in battery life. All 4 cores on line all the time with interactive gov. will be smooth with no lag and will not effect battery life.
I think the reason for that is 4 cores will keep 384 mhz in 99% while hot plug will rise up to 1.5 ghz together with voltages. I get that information from CPU spy. In short, low frequency low voltages max is possible is the best what you can do for you device. Frequency and voltages are the main factor in whole story.
Anyhow I really don't need you to agree with me.

U can try faux clock app to turn off the mpdecision

Sent from my Nexus 4 using xda premium

 

[Zaihanzainal]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

I don't think that would be fair to the users, would be very greedy and Scrooge McDuck like behavior

Thanks for the nice words!



Just change yourself manually, whats the big deal? :good:

Oops I meant like a standalone app just for donations alone... Not meaning your current app to be made a strictly paid version.....



Sent from my Nexus 4 using xda premium

 

[casonswag]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

U can try faux clock app to turn off the mpdecision

Sent from my Nexus 4 using xda premium

Yea its real smooth and snappier with mpdecision off wow

Sent from my Nexus 4 using xda premium

 

[drawde40599]

"Please don't ask me why" that is how I started my question. Okay, if you really like to know.
My point is smoothness not speed. With r93 there was option to put on line all 4 cores. Back then I tested both ways.What I find out is this. With hot plug I get lag from time to time that first moment until other cores kicks in. With all 4 on line I never get that plus there is no differences in battery life. All 4 cores on line all the time with interactive gov. will be smooth with no lag and will not effect battery life.
I think the reason for that is 4 cores will keep 384 mhz in 99% while hot plug will rise up to 1.5 ghz together with voltages. I get that information from CPU spy. In short, low frequency low voltages max is possible is the best what you can do for you device. Frequency and voltages are the main factor in whole story.
Anyhow I really don't need you to agree with me.

He got rid of all that so trying to duplicate on new version's makes no sense and isnt possible. But good luck

 

[Trewyy]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

Stock ROM - Franco nightly 102

My usage:

Auto brightness with WiFi
Stock CPU freq / interactive / -100mv
200mb data download
30mins gaming
Lots of Facebook (including a a few photo uploads), messenger and G+
4 gaming screenshots taken
Little bit of browsing
Full carbon backup (app+data) including full box upload.
Few personal photos taken (for walking dead app - fun!)
And finally, a couple YouTube videos watched.

Hahaha

Nice. I'm pulling 4 hours screen on with Facebook and messaging.

What's the secret to your success

 

[chrisjcks]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

Nice. I'm pulling 4 hours screen on with Facebook and messaging.

What's the secret to your success

ERM....

GPS disabled (wifi location still enabled) and NFC disabled.

Full sync enabled on everything.

I'm indoors, so maybe my auto brightness is at a lower percentage.



Sent from my Nexus 4 using Tapatalk 2

 

[Emilius]

U can try faux clock app to turn off the mpdecision

Sent from my Nexus 4 using xda premium

That is my point. I don't really need another app with 101 option I don't need. Running 2 kernel apps in the same time will just produce more problems and conflicts. One extra ON/OFF switch in Francko kernel app should not be a problem.

 

[LaboDJ]

R: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

Running Milestone 1 (thanks Franco!) and my device is hopping all around in frequencies, while idle, for no particular reason, as far as I can tell. I have no background apps open, and I've tested it on stock voltages.

Any particular reason why this is happening?

Thanks!

+1

 

[franciscofranco]

Yea its real smooth and snappier with mpdecision off wow

Sent from my Nexus 4 using xda premium

Again, placebo. MPdecision only online/offline cores. When you disable that if you had for example 2 cores offline they will stay offline forever. Same for online.

 

[keyra74]

app 8.9.2 reached market
102 was great for battery and i hope M1 will be the same

 

[chrisjcks]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

app 8.9.2 reached market
102 was great for battery and i hope M1 will be the same

Yep, just noticed it too.

Downloading!


Sent from my Nexus 4 using Tapatalk 2

 

[Emilius]

Again, placebo. MPdecision only online/offline cores. When you disable that if you had for example 2 cores offline they will stay offline forever. Same for online.

...but can we have an option for hot plug? Personally I will go will 4 cores all the time. I am sure you know how to do it. Even if is restart needed that is excellent.

 

[casonswag]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

Again, placebo. MPdecision only online/offline cores. When you disable that if you had for example 2 cores offline they will stay offline forever. Same for online.

Oh didnt know that for some reason it seems snappier maybe is cause i rebooted idk but how can we turn on allcores?
Edit:wait all cores in online now i checked in your app
Sent from my Nexus 4 using xda premium

 

[khanhtrinh]

I'm on stock. Do I need to full wipe to flash this kernel?

 

[Tylog]

AW: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

No

Nexus 4 Tapatalk

 

[casonswag]

Re: [KERNEL][GPL][N4] franco.Kernel - r102 | M1

This after i turned mpdecision off

Sent from my Nexus 4 using xda premium

 

[Mercado_Negro]

How do I change the language to Spanish? I'm using Xylon ROM and my default system language is "Español (United States)". I purchased the application via Google Play a couple of weeks ago (started with r100) and it's always been in English but I'd like to have it in Spanish.

Thanks.