[KERNEL] [GSM] [Hybrid-3.0.96] KK442:UV,OC,TUN,CIFS,FIOPS,OTG(v038) [Mar-15]

Search This thread

faux123

Senior Member
Dec 16, 2010
8,536
34,426
West Los Angeles
www.canonspike.com
XDA has issues with big OP :( Reduced to fix the issues...

Change Log:

http://faux.romhost.me/tuna/kk44/changelog.txt

*** KK 4.4.2 System Image ***
[ CFS ] (Mainline SmartReflex Edition - should work with ALL phones)
The File == Tuna kernel == (GPU @ 384 MHz)

[ CFS ] (Ultimate SmartReflex Edition - should work with ALL phones but may require BootLoop Calibrations!)
The File == Tuna kernel == (Enabled SmartReflex 1.5, Enabled GPU Overclock to 512 MHz) <== not available yet

Change Log:

http://faux.romhost.me/tuna/jb43/changelog.txt

*** JELLYBEAN 4.3 System Image ***
[ CFS ] (Mainline SmartReflex Edition - should work with ALL phones)
The File == Tuna JellyBean kernel == (GPU @ 384 MHz)

[ CFS ] (Ultimate SmartReflex Edition - should work with ALL phones but may require BootLoop Calibrations!)
The File == Tuna Jelly Bean kernel == (Enabled SmartReflex 1.5, Enabled GPU Overclock to 512 MHz) <== not available yet

*** JB 4.3 -- RESET KERNEL ***


Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this kernel!!!

My github Complying with GPL

Follow me on :

If you find this Kernel useful, feel free to hit the [Thanks] button below
[/size]
 
Last edited:

faux123

Senior Member
Dec 16, 2010
8,536
34,426
West Los Angeles
www.canonspike.com
FauxClock App recommended Settings"

CPU Control
  • Max clock - GHz 1.7/1.8 GHz for performance, 1.2 GHz for battery
  • Min clock - MHz 350 MHz for both (525 automatically when ID governor is running)
  • CPU Governor - Interactive for performance, Intellidemand for battery
  • mpdecision - Off
  • Snake Charmer - OFF for performance, On for Battery
  • Eco Mode - Off for performance, On for battery
  • Set On Boot - On

SOC Control

Voltage Control
  • Set On Boot -
  • Global CPU Voltage - Your preference

intellidemand gov control
  • Up Threshold - 75 for both
  • Boost Frequency - 0 for both
  • Two Phase Freq - 920000 for both
  • Sampling Rate - 50000 for both
  • Optimal Freq - 1060000 for both
  • Synchro Freq - 700000 for both
  • Set On Boot - On

GPU Control
  • GPU Governor - ondemand for both
  • Set On Boot - On for both

I/O Scheduler Control
  • I/O Scheduler (eMMC) - FIOPS for both
  • Readhead Size (eMMC) - 1024 for both
  • Set On Boot - On for both

Misc Control
  • Dynamic File Sync - On for both
  • TCP Congestion Control - Westwood for both

Vibration Control
  • Set On Boot - On for both
  • Vibration Control - Your own Preference

Z-Control
  • Set On Boot - On for both
  • Clear VFS Cache After Boot - On
  • Auto FS Writeback Delay Mode - On
  • Swappiness - 100% if ZRAM enabled, 0% if disabled
  • VFS Cache Pressure - 100% if ZRAM enabled, 150% if disabled
  • Dirty Ratio - 20% for both
  • Dirty Background Ratio - 5% for both

Above is what I use personally. MAY NOT be optimal for all :fingers-crossed:
 
Last edited:

faux123

Senior Member
Dec 16, 2010
8,536
34,426
West Los Angeles
www.canonspike.com
DUE TO MY EXTREMELY BUSY SCHEDULE BOTH @ WORK AND @ HOME, I WILL ONLY MAKE MAJOR ANNOUNCEMENTS ONCE PER WEEK
Open Beta may not be stable and may cause issues with your phone!


By loading open beta you have agreed to:

1. To report all random reboots with associated /proc/last_kmsg
2. To provide feedback on errors or bugs with detail phone information such as ROM, kernel version, and apps
3. Participate in Forum discussions for the beta software with others without FLAMING each other or post useless information such as:
a) Phone doesn't boot (without providing any additional information, ROM versions etc)
B) phone is too hot (without providing any additional information, ie OC freq, UV etc)

The Open Beta system is designed to have the community help each other and the developers. This way, all potential bugs are flushed out so the final released version will be stable and error free. The more actively you participate in Beta Testing the better the final product will be (you are really helping yourself to create a better community software).

If you do NOT agree with the statements above, DO NOT load my Open Beta software.



Kernel 025 Open Beta 1 is out! (BETAs ARE ALWAYS ULTIMATE + SMARTREFLEX VERSION unless I stated otherwise)

JB ==> http://faux.androidro.ms/tuna/beta/tuna-jb-kernel-025b01.zip

[ build 1 ]
tweaked ID governor for better UI response
Added vegas TCP congestion control (for those with LTE)
Updated to latest Kernel.org Linux 3.0.56
enabled MM compaction and KSM
 
Last edited:

MultiCulti

Senior Member
Jul 28, 2010
2,003
300
35
Wien
tested your new version ... and noticed some laggs in menu's and browsing ... so i ran few times antutu

first with your kernel @1200 ondemond

507b1f5e-825c-5100.jpg



francos latest @1200 ondemond

507b1f5e-827a-d8ff.jpg


don't worry ... i'm not complaining ...just let you know and maybe can help :thumbup:

beamed in through my brain ...
 

jkoljo

Inactive Recognized Developer
Jun 18, 2009
3,400
2,527
Tampere
I am really glad to see you here, faux! What's your opinion on the sdcard binary that some devs are using to eliminate internal memory read high CPU usage? :)

Sent from my Galaxy Nexus using Tapatalk
 

faux123

Senior Member
Dec 16, 2010
8,536
34,426
West Los Angeles
www.canonspike.com
Actually it seems so...I tried again with ondemand as governor and did 2 Antutu runs...both results were just over 4000points.

My version of OnDemand is not the normal OnDemand. It has a two-phase energy saving patch applied to it. It alternates between Max freq and 900 MHz to save battery. The performance for everyday use should be very smooth but benchmark may not reflect the actual experience. If you want high benchmark, I suggest Interactive or Performance.
 

MultiCulti

Senior Member
Jul 28, 2010
2,003
300
35
Wien
My version of OnDemand is not the normal OnDemand. It has a two-phase energy saving patch applied to it. It alternates between Max freq and 900 MHz to save battery. The performance for everyday use should be very smooth but benchmark may not reflect the actual experience. If you want high benchmark, I suggest Interactive or Performance.

no no :D don't reall care about benches ... just noticed with ondemond few laggs ... that was the reason why i ran antutu :thumbup:

edit : OnDemand .... **** its late :D

beamed in through my brain ...
 

inffy

Senior Member
Jun 26, 2005
3,435
2,387
Helsinki, Finland
My version of OnDemand is not the normal OnDemand. It has a two-phase energy saving patch applied to it. It alternates between Max freq and 900 MHz to save battery. The performance for everyday use should be very smooth but benchmark may not reflect the actual experience. If you want high benchmark, I suggest Interactive or Performance.

Ah thanks for the info.

Was thinking something like that. After the flash the ui seemed to lag, but it settled after a while (which is actually mentioned in the first post).
 

Top Liked Posts

  • There are no posts matching your filters.
  • 201
    XDA has issues with big OP :( Reduced to fix the issues...

    Change Log:

    http://faux.romhost.me/tuna/kk44/changelog.txt

    *** KK 4.4.2 System Image ***
    [ CFS ] (Mainline SmartReflex Edition - should work with ALL phones)
    The File == Tuna kernel == (GPU @ 384 MHz)

    [ CFS ] (Ultimate SmartReflex Edition - should work with ALL phones but may require BootLoop Calibrations!)
    The File == Tuna kernel == (Enabled SmartReflex 1.5, Enabled GPU Overclock to 512 MHz) <== not available yet

    Change Log:

    http://faux.romhost.me/tuna/jb43/changelog.txt

    *** JELLYBEAN 4.3 System Image ***
    [ CFS ] (Mainline SmartReflex Edition - should work with ALL phones)
    The File == Tuna JellyBean kernel == (GPU @ 384 MHz)

    [ CFS ] (Ultimate SmartReflex Edition - should work with ALL phones but may require BootLoop Calibrations!)
    The File == Tuna Jelly Bean kernel == (Enabled SmartReflex 1.5, Enabled GPU Overclock to 512 MHz) <== not available yet

    *** JB 4.3 -- RESET KERNEL ***


    Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this kernel!!!

    My github Complying with GPL

    Follow me on :

    If you find this Kernel useful, feel free to hit the [Thanks] button below
    [/size]
    59
    FauxClock App recommended Settings"

    CPU Control
    • Max clock - GHz 1.7/1.8 GHz for performance, 1.2 GHz for battery
    • Min clock - MHz 350 MHz for both (525 automatically when ID governor is running)
    • CPU Governor - Interactive for performance, Intellidemand for battery
    • mpdecision - Off
    • Snake Charmer - OFF for performance, On for Battery
    • Eco Mode - Off for performance, On for battery
    • Set On Boot - On

    SOC Control

    Voltage Control
    • Set On Boot -
    • Global CPU Voltage - Your preference

    intellidemand gov control
    • Up Threshold - 75 for both
    • Boost Frequency - 0 for both
    • Two Phase Freq - 920000 for both
    • Sampling Rate - 50000 for both
    • Optimal Freq - 1060000 for both
    • Synchro Freq - 700000 for both
    • Set On Boot - On

    GPU Control
    • GPU Governor - ondemand for both
    • Set On Boot - On for both

    I/O Scheduler Control
    • I/O Scheduler (eMMC) - FIOPS for both
    • Readhead Size (eMMC) - 1024 for both
    • Set On Boot - On for both

    Misc Control
    • Dynamic File Sync - On for both
    • TCP Congestion Control - Westwood for both

    Vibration Control
    • Set On Boot - On for both
    • Vibration Control - Your own Preference

    Z-Control
    • Set On Boot - On for both
    • Clear VFS Cache After Boot - On
    • Auto FS Writeback Delay Mode - On
    • Swappiness - 100% if ZRAM enabled, 0% if disabled
    • VFS Cache Pressure - 100% if ZRAM enabled, 150% if disabled
    • Dirty Ratio - 20% for both
    • Dirty Background Ratio - 5% for both

    Above is what I use personally. MAY NOT be optimal for all :fingers-crossed:
    30
    kitkat 035 is official! Enjoy!
    29
    DUE TO MY EXTREMELY BUSY SCHEDULE BOTH @ WORK AND @ HOME, I WILL ONLY MAKE MAJOR ANNOUNCEMENTS ONCE PER WEEK
    Open Beta may not be stable and may cause issues with your phone!


    By loading open beta you have agreed to:

    1. To report all random reboots with associated /proc/last_kmsg
    2. To provide feedback on errors or bugs with detail phone information such as ROM, kernel version, and apps
    3. Participate in Forum discussions for the beta software with others without FLAMING each other or post useless information such as:
    a) Phone doesn't boot (without providing any additional information, ROM versions etc)
    B) phone is too hot (without providing any additional information, ie OC freq, UV etc)

    The Open Beta system is designed to have the community help each other and the developers. This way, all potential bugs are flushed out so the final released version will be stable and error free. The more actively you participate in Beta Testing the better the final product will be (you are really helping yourself to create a better community software).

    If you do NOT agree with the statements above, DO NOT load my Open Beta software.



    Kernel 025 Open Beta 1 is out! (BETAs ARE ALWAYS ULTIMATE + SMARTREFLEX VERSION unless I stated otherwise)

    JB ==> http://faux.androidro.ms/tuna/beta/tuna-jb-kernel-025b01.zip

    [ build 1 ]
    tweaked ID governor for better UI response
    Added vegas TCP congestion control (for those with LTE)
    Updated to latest Kernel.org Linux 3.0.56
    enabled MM compaction and KSM
    23
    I know ;) ASRAM and SuperRAM that's something different :)

    ---------- Post added at 07:42 PM ---------- Previous post was at 06:52 PM ----------



    Thank you for this update, a will definitely try Intelliactive governor :) Also thanks that you did not retired GNex :) You are a TRULY developer. I don't know how can you be called only "Senior Member"...

    Senior because of xda politics and I don't really care. I let my work speak for me.

    Sent from my Nexus 5 using Tapatalk