also getting error executing updater binary in zip lighting kernel.
On existenz V3. I have Xperia ZL!
Thanks for your work!!!!
On existenz V3. I have Xperia ZL!
Thanks for your work!!!!
[KERNEL]Lightning kernel for stock roms
- Thread starter nikhil18
- Start date
Yes this is known and reported a few posts back.Gives error on existenz v3
It's probably not possible to unpack stock boot.img ramdisk with the in anykernel included tools so dev will make another version as boot.img so it'll overwrite the stock boot.img while flashing.
Doesnt ZL and Z have different kernels? Cuz this is Z forum and you might screw your device to the moon and back if you're cross-flashing kernels.
So check that out first!
Yes I know. I did not download the one for Z but I thought I write here aswell because in this subforum there is more movement than in the ZL subforum.
ok guys reuploaded version 1 with auto smp,intelliplug and boot.img version
installation instructions
first install the boot img version then install the normal version 1 both from recovery
installation instructions
first install the boot img version then install the normal version 1 both from recovery
Works like a charm! It feels just as fast as CM version and gpu uv work's as it should now (using auto-smp, didn't test intelli-plug yet).
But it still doesn't support init.d, could you kindly consider including init.d in a next release?
What do u mean..? Just flash the boot.img zip through recovery.. No computer needed. Look inside the zip, there's boot.img and meta-inf folder
How find the boot Img. zip? Im link is the cm 11 new. Thanks.What do u mean..? Just flash the boot.img zip through recovery.. No computer needed. Look inside the zip, there's boot.img and meta-inf folder
Download tab above this thread http://forum.xda-developers.com/devdb/project/?id=6756#downloads
BTW just found out that flashing a multirom installer is causing a problem.
When flash from philz recovery I get error status 7, but when I flash from xzdualrecovery it says something about a problem while injection boot.img, after that device won't boot at all and fastbooting this kernel give the same results at that moment.
Only fastbooting hodorkernel, and from recovery flashing this one again will make device boot again.
I unpacked both hodorkernel and this kernel but I get extremely different results. When unpack hodorkernel, there are a lot of directories but this kernel looks almost like when unpacking a CM kernel. Maybe that's why it gives that error on flashing multirom installer?
Could you please take a look at that and maybe include multirom in it? Cuz now the kernel is kexec enabled, but u can't use the kexec because of multirom can't be installed, Im sure this kernel will work as secondary kernel in multirom, but stock roms are nog yet supported as secondary so the only option is to have it primary.
(long story but I don't know how to explain this otherwise)
When flash from philz recovery I get error status 7, but when I flash from xzdualrecovery it says something about a problem while injection boot.img, after that device won't boot at all and fastbooting this kernel give the same results at that moment.
Only fastbooting hodorkernel, and from recovery flashing this one again will make device boot again.
I unpacked both hodorkernel and this kernel but I get extremely different results. When unpack hodorkernel, there are a lot of directories but this kernel looks almost like when unpacking a CM kernel. Maybe that's why it gives that error on flashing multirom installer?
Could you please take a look at that and maybe include multirom in it? Cuz now the kernel is kexec enabled, but u can't use the kexec because of multirom can't be installed, Im sure this kernel will work as secondary kernel in multirom, but stock roms are nog yet supported as secondary so the only option is to have it primary.
(long story but I don't know how to explain this otherwise
)i didnt found the download link except the overclock zip patch am i the only one?
I flash it on existenz v3 and the display didin't turn on after reboot.Anyone with the same problem. The only way to fix it is to fastboot hodor kernel boot.img
Read thread or:
http://forum.xda-developers.com/showthread.php?p=56987028
But if u flash hodorkernel first, reboot recovery, then flash the boot.img.zip and then the intelli-plug or auto-smp? Then it will work
Last edited:
Clear installation description
I really miss clear installation description. I am not sure what is must to install and what is this or this
Can anybody summarize it?
1) boot.img - this is clear
2) auto OR intelli
OR
2) OR 3) Overclock xxx - this is a must or is it voluntary flash file?
It would be good to have summarized everything on OP.
(and it really have nothing to do I've just soft brick my phone probably due to wrong order or missing overclock files) I have to reflash stock kernel in the afternoon.... my learning is not to flash anything out of home....
I really miss clear installation description. I am not sure what is must to install and what is this or this
Can anybody summarize it?
1) boot.img - this is clear
2) auto OR intelli
OR
2) OR 3) Overclock xxx - this is a must or is it voluntary flash file?
It would be good to have summarized everything on OP.
(and it really have nothing to do I've just soft brick my phone probably due to wrong order or missing overclock files)
I have to reflash stock kernel in the afternoon.... my learning is not to flash anything out of home....
Or make sure adb minimal package and s1 fastboot USB drivers is on your external SD. That way u can repair ur phone from any pc :thumbup:I really miss clear installation description. I am not sure what is must to install and what is this or this
Can anybody summarize it?
1) boot.img - this is clear
2) auto OR intelli
OR
2) OR 3) Overclock xxx - this is a must or is it voluntary flash file?
It would be good to have summarized everything on OP.
(and it really have nothing to do I've just soft brick my phone probably due to wrong order or missing overclock files)
Instructions are to flash the boot.img.zip (it is a flashable zip) and then immediately flash the auto-smp zip OR intelli-plug zip.
If u want overclock, u flash overclock also.
Nothing fancy here.
BTW it might happen that phone only get black screen, then u probably flashed this on top of stock kernel. (although that should work, but didn't work for me either)
To prevent / fix this, flash first hodorkernel.
Reboot recovery.
Flash boot.img.zip.
Flash auto-smp/intelli-plug.
Thanks a lot ..... this is I think what is missing in OP. Would be great if @nikhil18 can take over this description and post it there.Or make sure adb minimal package and s1 fastboot USB drivers is on your external SD. That way u can repair ur phone from any pc :thumbup:
Instructions are to flash the boot.img.zip (it is a flashable zip) and then immediately flash the auto-smp zip OR intelli-plug zip.
If u want overclock, u flash overclock also.
Nothing fancy here.
BTW it might happen that phone only get black screen, then u probably flashed this on top of stock kernel. (although that should work, but didn't work for me either)
To prevent / fix this, flash first hodorkernel.
Reboot recovery.
Flash boot.img.zip.
Flash auto-smp/intelli-plug.
I have the issue you described - after flashing boot.img + (I flashed both Intelli + auto - it guess it should not matter and there should remain only last flash, old will be override), I didn't flash overclock. But flashing of hodorkernel is what I missed. :good:
Thanks for a great hint, I will fix it later... regarding external fastboot, unfortunatelly not possible on my company laptop due to missing access (admin) rights. I have to always wait for home.
Yes but flashing hodorkernel isn't a instruction for installing this kernel, it's only a little share of how I'd get managed to get this workingThanks a lot ..... this is I think what is missing in OP. Would be great if @nikhil18 can take over this description and post it there.
I have the issue you described - after flashing boot.img + (I flashed both Intelli + auto - it guess it should not matter and there should remain only last flash, old will be override), I didn't flash overclock. But flashing of hodorkernel is what I missed. :good:
Thanks for a great hint, I will fix it later... regarding external fastboot, unfortunatelly not possible on my company laptop due to missing access (admin) rights. I have to always wait for home.
Also, when i used intelli-plug on CM version lightning, i had random reboots and boot issues, so my suggestion is to only use auto-smp.
So if ur home all u have to do is:
Fastboot flash hodorkernel img
Reboot recovery
Flash lightning boot.img.zip
Flash auto-smp (or intelli-plug if u want to)
Reboot and enjoy
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone