• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[KERNEL][LINARO][3.0.82][900 mhz]Pandora Kernel Extreme Edition v2[02/08/13]

Status
Not open for further replies.
Search This thread

cyborgmanu

Senior Member
May 10, 2013
101
36
New Delhi
Pandora revised edition (see the first post !! ;) ) :)

Hey there...currently I'm using Sense 4 which has been ported from HTC One V and is based on cm9...
I only have a single partition...and I do not want to make 2 or 3 partitions...!
So can you please tell me if there is a way by which I can OC my phone without burning NAND ?
And it is my request that you post the link of that kernel as I have seen the previous posts and have found the ones quite confusing where you simply told people to use "R3" or the "Revised Version"...!

Thanks in Advance !
 

<JohnCarter>

Senior Member
Jun 1, 2012
761
1,770
Ranchi
Hey there...currently I'm using Sense 4 which has been ported from HTC One V and is based on cm9...
I only have a single partition...and I do not want to make 2 or 3 partitions...!
So can you please tell me if there is a way by which I can OC my phone without burning NAND ?
And it is my request that you post the link of that kernel as I have seen the previous posts and have found the ones quite confusing where you simply told people to use "R3" or the "Revised Version"...!

Thanks in Advance !

As i said before the R3 version of the Revised series doesnot need partitions and has an Oc limit of 800mhz (by older method) so, if you don't want to make 2 or 3 partitions you can use R3 version.. its in the downloads link ! Use the
 
  • Like
Reactions: TUDVAD

TUDVAD

Senior Member
Dec 15, 2012
302
57
New Delhi
As i said before the R3 version of the Revised series doesnot need partitions and has an Oc limit of 800mhz (by older method) so, if you don't want to make 2 or 3 partitions you can use R3 version.. its in the downloads link ! Use the
can i use m2sd memory script with revised r3 edition i have one fat32 and one ext
or u have done memory scripting by symlinking already ?
 

mrroks

Senior Member
Nov 23, 2012
768
114
Karachi
nope it isn't there was a prob in previous release here you go.. it fixes the benchmark,reboot and kernel version not showing problems ;)

So the new fixed R3 is here :

Features are same as Revised Edition but now it supports the older 800mhz Oc without nand burns + support for all roms and even SENSE 4+ roms without need of partitioning sd-card



Currently this is supported only by ALL roms above ICS and also SENSE 4+ roms also there is no need for sd-card partitiong .

CHANGELOGS
Code:
[LIST]
[*][B]Updated to kernel 3.0.82[/B]
[*][B]Added the old  OC method supporting OC upto 800mhz[/B]
[*][B]compiled with linaro toolchain 4.6.2[/B]
[*]incresed deep sleep performance for better battery backup
[*]compiled with cpuspy support
[*]compiled with ondemand gov tweaks
[*]updated network and gpu drivers
[*]added fast charge support
[*]cleaned blobs from source

[/LIST]

IMP : The zip given here will work for ALL roms above ICS and also SENSE 4+ roms also there is no need for sd-card partitiong

Instructions and downloads
  • Download the zip named "Pandora r3" from here :
  • Flash the zip you downloaded earlier
  • First boot after installation will take a little longer time
  • That's all you're good to go with your new pico jet ;)


BUGS : USB mounting may not work ,for that use multi-mount sd-card app form playstore

AND PS : it will be still named R2 in the about phone as there was no significant changes in the main stream source And i've attched the benchmark @ 800 mhz

i flasshed this kerenel sense 4.1 lite and now my ROM is Damaged its not booting up man ... :(
 

Abhigyan66

Senior Member
Nov 24, 2012
54
4
Guwahati
Releasing Pandora kernel Extreme edition v2 featuring 900mhz OC for jellybean 4.1.2 and 4.2.2 roms..

all you need to do is make partitions just like cute_prince's method ;)

Make sure you have at least class 6 or above SD-CARD ... for best performance use .. class 10 sd-card and make ext4 partitions.. and use philz recovery to lfash (i haven't tested other recoveries.. so if it works on other recovery post here )

This should fix wifi authentication problem.. need full confimation.. (i don't have a wifi :'-( )

Screens got of pandora extreme v2 on sense 4.1 by cute_prince :

yoyo_zpsaab04330.png


Changelog :

  • Added support for sense 4.1 by cute_prince
  • Added 900mhz OC
  • Wi-Fi Fix [authentication problem] [unconfirmed ]
  • a few source cleanup
  • removed unneeded governors



Downloads :

SeNse 4.1 by cute prince :
http://www.mediafire.com/download/e5y5praeh3j3kdx/Pandora_exterme_sense4.1_v2.zip

Jellybean 4.1.2 roms :

http://www.mediafire.com/download/2qs2mlmmuyq9ovm/Pandora_exterme_4.1.2_v2.zip

Jellybean 4.2.2 roms :

http://www.mediafire.com/download/q82szvxzrf2d216/Pandora_exterme_4.2.2_v2.zip

Instructions




PS: There will be no nand burns and it will work on all 4.1.2 and 4.2.2 roms except miui AND SENSE 4.1 by cute_prince

Which rom are u using?? :confused: And can you give me the link for the rom plzz!! :D
 

G_HACK

Member
May 9, 2012
25
1
../\.. for me the Best Kernel Ever..

Just Fix The wifi Authentication Problem.. and i'll lock my bootloader on this rom. :laugh: just kidding. !
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 43
    Pandora KerneL

    Pandora Kernel is a custom kernel which you can flash on the htc explorer for getting mind blowing performance with decent battery backup.

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     * Submitting bug reports on nightly builds is the leading 
     * cause of male impotence.
    */

    READ THIS BEFORE POSTING ANYTHING :
    This kernel DOESN'T brick nand ..... i've tested it on my pico and its working fine..

    A SCREENSHOT OF ANTUTU BANCHMARK at 900mhz on sense 4.1
    yoyo_zpsaab04330.png



    See pandora Kernel R3 in action


    [thanks to adityalahiri13 for the vid]

    Features


    • Extreme edition v2 and above
    • Added support for sense 4.1 by cute_prince
    • Added 900mhz OC
    • Wi-Fi Fix [authentication problem] [untested ]
    • a few source cleanup
    • removed unneeded governors
      REVISED EDITION AND ABOVE
    • Updated to kernel 3.0.82
    • Added the new pll2 OC method supporting OC upto 877mhz AND old oc upto 800mhz
    • compiled with linaro toolchain 4.6.2
    • incresed deep sleep performance for better battery backup
    • compiled with cpuspy support
    • compiled with ondemand gov tweaks
    • updated network and gpu drivers
    • added fast charge support
    • cleaned blobs from source
    • Added 737mhz overclock for snappier and stable performance with awesome battery life (v2.0 onwards)
    • Added Overclock upto 800mhz
    • added smartass v2 gov. (v2.0 onwards)
    • added lagfree gov. (v2.0 onwards)
    • some performance tweaks (v2.0 onwards)
    • modules included (v2.0 onwards)
    • added lulzactive governor
    • added powersave governor
    • added userspace governor
    • added interactive governor
    • added conservative governor
    • added deadline,cfq,bfq,row i/o scheduler
    • GPU oc for better gaming performance
    • tweaked for smothness
    • Tweaked ondemand and conservative governors
    • Increased touchscreen sensitivity


    Sources:
    https://github.com/ayushrox/Pandora_kernel.git
    22
    downloads and changelogs + precautions

    Downloads :

    Extreme Edition v2

    Code:
    [url]http://forum.xda-developers.com/showpost.php?p=44206567&postcount=556[/url]

    Extreme EDITION

    Code:
    Jellybean 4.1.2 roms :
    
    [url]http://www.mediafire.com/download/iqg4dth0d44ieav/Pandora_exterme_4.1.2.zip[/url]
    
    Jellybean 4.2.2 roms :
    
    [url]http://www.mediafire.com/download/ldineo8rhg3p7vp/Pandora_exterme_4.2.2.zip[/url]

    REVISED EDITION R3

    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=43242945&postcount=357"]http://forum.xda-developers.com/showpost.php?p=43242945&postcount=357[/URL]

    REVISED EDITION
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=42962051&postcount=290"]http://forum.xda-developers.com/showpost.php?p=42962051&postcount=290[/URL]

    V2.0
    Code:
    [URL="http://forum.xda-developers.com/showpost.php?p=41293267&postcount=146"]http://forum.xda-developers.com/showpost.php?p=41293267&postcount=146[/URL]

    v1.0

    Code:
    cm10.1 : [url]http://www.mediafire.com/?05a5anc682qtre5[/url]
    cm 10 and cm9 : [url]http://www.mediafire.com/?m621szj8k2lt3lf[/url]
    MIUI v5 [url]http://d-h.st/G3t[/url]



    Instructions and downloads for REvised edition


    • FOR REVISED EDITION R2
    • Flash the zip you downloaded earlier
    • First boot after installation will take longer time as everything will be rewritten on the new partition It is highly recommended to clean install the rom before flashing this
    • That's all you're good to go with your new pico jet ;)

      FOR REVISED EDITION
    • Partition your sd card exactly as cute_prince has stated here : http://forum.xda-developers.com/showthread.php?t=2337886
      make sure your partitoned sd card is in order : SD card(Ntfs or fat32) , SD-DATA(EXT4) , SD-CACHE(ext4)
    • Install cm10 or any rom based on cm10
    • Flash the zip you downloaded earlier
    • First boot after installation will take longer time as everything will be rewritten on the new partition It is highly recommended to clean install the rom before flashing this
    • That's all you're good to go with your new pico jet ;)




    Changelog
    Code:
    [B][COLOR="blue"]Revised Edition[/COLOR][/B]
    [LIST]
    [*][B]Updated to kernel 3.0.82[/B]
    [*][B]Added the new pll2 OC method supporting OC upto 877mhz and the old OC upto 800mhz[/B]
    [*][B]compiled with linaro toolchain 4.6.2[/B]
    [*]incresed deep sleep performance for better battery backup
    [*]compiled with cpuspy support
    [*]compiled with ondemand gov tweaks
    [*]updated network and gpu drivers
    [*]added fast charge support
    [*]cleaned blobs from source
    [/LIST]
    
    [B][COLOR="blue"]V2.0[test-release][/COLOR][/B]
    [LIST]
    [*]Added 737mhz overclock
    [*]added smartass v2 gov.
    [*]added lagfree gov.
    [*]some performance tweaks
    [*]modules included
    [/LIST]
    
    [B]V1.0[/B]
    [LIST]
    [*]intial build
    [/LIST]

    --only for previous build--
    PRECAUTIONS
    • DO NOT MOUNT SYSTEM AS RO using any root app
    • if you need to mount as RO first restore OC to 600mhz
    • you will not be able to backup your new rom
    • changing simply the ramdisk will not do for this release THe REvised Edition WILL ONLY WORK FOR CM10 for now
    • for best performance when not in use or mild useage .. GO with this config : governor: lulzactive and bfq scheduler , and when in heavy use : governor : performance or smartassv2 , schduler :bfq



    Credits

    A huge thanks to russelldias - a collaborator for pandora kernel for all his help all the waythrough !!

    • cute_prince
    • sakindia123
    • championswimmer
    • adityalahiri13
    • Keval104
    • Deic



    16
    Pandora_kernel_revised edition

    Hey guys ,

    Releasing pandora kernel revised edition with the new pll2 OC

    Currently this is supported only by cm 10 . I will add support for different roms later if you want any rom to be included give me a pm..

    CHANGELOGS
    Code:
    [LIST]
    [*][B]Updated to kernel 3.0.82[/B]
    [*][B]Added the new pll2 OC method supporting OC upto 877mhz[/B]
    [*][B]compiled with linaro toolchain 4.6.2[/B]
    [*]incresed deep sleep performance for better battery backup
    [*]compiled with cpuspy support
    [*]compiled with ondemand gov tweaks
    [*]updated network and gpu drivers
    [*]added fast charge support
    [*]cleaned blobs from source
    
    [/LIST]

    IMP : The zip given here will work only for CM10 rom and cutom roms based
    on cm10


    Instructions and downloads
    • Download the zip named "Pandora_revised" from here :http://www.mediafire.com/download/1i7lk6r7ulm4atf/pandora_revised.zip
    • Partition your sd card exactly as cute_prince has stated here : http://forum.xda-developers.com/showthread.php?t=2337886
      make sure your partitoned sd card is in order : SD card(Ntfs or fat32) , SD-DATA(EXT4) , SD-CACHE(ext4)
    • Install cm10 or any rom based on cm10
    • Flash the zip you downloaded earlier
    • First boot after installation will take longer time as everything will be rewritten on the new partition It is highly recommended to clean install the rom before flashing this
    • That's all you're good to go with your new pico jet ;)

    PRECAUTIONS
    • DO NOT MOUNT SYSTEM AS RO using any root app
    • if you need to mount as RO first restore OC to 600mhz
    • you will not be able to backup your new rom
    • changing simply the ramdisk will not do for this release
    • for best performance when not in use or mild useage .. GO with this config : governor: lulzactive and bfq scheduler , and when in heavy use : governor : performance or smartassv2 , schduler :bfq

    BUGS : USB mounting may not work for that use multi-mount sd-card app form playstore
    13
    UPDATE

    hey guys...
    giving out a test release for v2...

    READ THIS BEFORE POSTING ANYTHING :
    This kernel DOESN'T brick nand ..... i've tested it on my pico and its working fine..

    i was a bit busy today so didn't release the complete versions...
    so here releasing a v2.0[test-release]

    CHANGELOG
    Code:
    [LIST]
    [*]Added 737mhz overclock
    [*]added smartass v2 gov.
    [*]added lagfree gov.
    [*]some performance tweaks
    [*]modules included
    [/LIST]

    P.S.
    Code:
    This is a test release so couldn't add full features..
    [LIST]
    [*]this test release is NOT for sense 4(will include in full version)
    [/LIST]

    BUGS
    Code:
    [LIST]
    [*]native USB mounting doesn't work (for enabling UMS use the apps in downloads)
    [*]nothing else  :)
    [/LIST]

    Downloads

    The zip provided will work for all ICS and JB roms except sense 4 [p.s. : i haven't tested in all roms out there.. ]

    Pandora kernel v2.0[test release] : http://www.mediafire.com/?hbnumd3v1zsdcc1
    (tested on cm 10, will work in cm 10.1 ,miui,etc.... ICS and JB roms)

    To get USB mounting download and install this app namely Multi Mount SD-card : http://www.mediafire.com/?2zl6qb28usdb742

    How to use
    Code:
    [LIST]
    [*]download the kernel zip and the app provided
    [*]flash the zip 
    [*]install the app like any other app
    [*]to get UMS working .. open Multi Mount SD-card app and select auto-un.mount SD-Card(s) option and also select show splash on mount option
    [*]Annnnd... Its done... use the way u want :)
    [/LIST]
    9
    -- screwed release --