[KERNEL][M/N] Clarity Kernel [Final]
- Thread starter rainforce279
- Start date
- Status
Custom, the word says it all, custom kernels provide a lot more cpu governers, to control the processing the way we want to, for battery vs performance ratio, some are good for battery, some are performance oriented. Some give you handy features like dt2w and s2w.
Hope this clears it up for you.
Z
z751
Guest
Any chance that we can get an added the option to UNDERclock the cpu lower than 300 like say, 96 mhz like in previous builds of this kernel?
Any recomended settings for battery life, with decent performance (no gaming)Custom, the word says it all, custom kernels provide a lot more cpu governers, to control the processing the way we want to, for battery vs performance ratio, some are good for battery, some are performance oriented. Some give you handy features like dt2w and s2w.
Hope this clears it up for you.
Without gaming, I usually use conservative mode, and lock the frequency at 998mhz, and enable multi core power saving at agressive. And at 40% battery i automate a profile at 770 mhz to increase battery, when listening to music or just browsing.
What specs/version are you on?
---------- Post added at 01:35 PM ---------- Previous post was at 01:32 PM ----------
Does DT2W use much battery?
I can't find conservative on cpu, is it the gpu setting?
I'm using the DT2W version.
Without any customizations, it add around half to an hour of SoT on my device using cm14.1.
Yes, i think.
But i do no gaming nor social media.
Mostly for browsing, chatting (whatsapp, hangouts), forum (xda), and sometime youtube.
Last edited:
Sorry, that was present in the older MM versions, so I mistyped, now I usually use impulse, it's a better balance between battery and performance just like interactive but has some tweaks to save battery.
Conservative is only available for gpu
---------- Post added at 07:04 PM ---------- Previous post was at 06:57 PM ----------
For both multitasking performance and battery save, use "Lionheart" in cpu and "conservative" in gpu settings, for extreme battery saving, you can use powersave but with lots of lags, powersave mode caps cpu frequency to 90-100 mega hertz which saves enough battery, better when you're not using your phone and still want your phone in standby mode without even worrying about power consumption
---------- Post added at 07:04 PM ---------- Previous post was at 06:57 PM ----------
For both multitasking performance and battery save, use "Lionheart" in cpu and "conservative" in gpu settings, for extreme battery saving, you can use powersave but with lots of lags, powersave mode caps cpu frequency to 90-100 mega hertz which saves enough battery, better when you're not using your phone and still want your phone in standby mode without even worrying about power consumption
push 1.5 stabel hybrid
changelogs:
- cherry pick some fixes bugs with wifi
- added badass, smartassH3, clarity governor
- remove intellidemand and intelliactive
- set 256kb only for mmc
- intelliplug remove freq limiter
Download
NOTE
D initial for DT2W and ND initial for No-DT2W As requested
https://www.androidfilehost.com/?w=files&flid=133872
changelogs:
- cherry pick some fixes bugs with wifi
- added badass, smartassH3, clarity governor
- remove intellidemand and intelliactive
- set 256kb only for mmc
- intelliplug remove freq limiter
Download
NOTE
D initial for DT2W and ND initial for No-DT2W As requested
https://www.androidfilehost.com/?w=files&flid=133872
Is it better for battery life (with decent performance)?Wohoo finally released. Clarity Governor
Sent from my Moto E using XDA Labs
I think, yes. It based on SmartAssH3 whichis it has been tuned to have more efficient frequency scaling (not ramping too high when not needed) which this could potentially result in better battery life. Cmiiw.
Sent from my Moto E using XDA Labs
Last edited:
Z
z751
Guest
Hi and thank you for the awesome kernel...!!!!
Can you add please ,if its possible kcal control ?
Can you add please ,if its possible kcal control ?
for intelliplug its purpose just control the cpu cores not frequency, and i remove freq limiter from intelliplug because to avoid some race condition by cpu governor such as smartassH3 or clarity cpu governor is using frequency limter when sleep,
also i remove intellidemand/active cpu governor because thats not updated to long.
kcal already added by official source cm, you can use it using kernel adiutor under section "screen"
push 1.6 stabel hybrid
changelogs:
- Remove Intelliplug for now (suspected not stable)
- Remove Wq power efficient (to many problem because of this)
- Update ondemand and clarity cpu governor
- Added Maple I/O scheduler
- Merge Linux 3.4.y
- Linux 3.4.113
- Some upstream and backport commits
for detail pls check my github, Thanks
Happy New Year
Download
https://www.androidfilehost.com/?w=files&flid=133872
changelogs:
- Remove Intelliplug for now (suspected not stable)
- Remove Wq power efficient (to many problem because of this)
- Update ondemand and clarity cpu governor
- Added Maple I/O scheduler
- Merge Linux 3.4.y
- Linux 3.4.113
- Some upstream and backport commits
for detail pls check my github, Thanks
Happy New Year
Download
https://www.androidfilehost.com/?w=files&flid=133872
- Status
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone