[KERNEL] [May26] Bulletproof-EVO-1.4 | Optimized stock with BLN/S2W/DT2W/UV

[travisw0204]

Looks promising but when I tried to install it the Aroma Installer was so slow that I thought something was wrong with my phone. Maybe I'll try it later on

 

[flar2]

Looks promising but when I tried to install it the Aroma Installer was so slow that I thought something was wrong with my phone. Maybe I'll try it later on

If you're s-on it could take five minutes or more to install.

 

[travisw0204]

If you're s-on it could take five minutes or more to install.

My bad I forgot to put that I'm S-Off. It was weird. I went ti install it and it hung up on the first screen. I then managed to get past that screen and it hung up on the second screen. I waited for about 5 minutes and it didn't do anything. Does it matter that I have the updated TP Firmware? I haven't had any issues with any other aroma installers so that makes this even more weird.

 

[flar2]

My bad I forgot to put that I'm S-Off. It was weird. I went ti install it and it hung up on the first screen. I then managed to get past that screen and it hung up on the second screen. I waited for about 5 minutes and it didn't do anything. Does it matter that I have the updated TP Firmware? I haven't had any issues with any other aroma installers so that makes this even more weird.

Did you try it again? My installer shouldn't be any different than others.

Post recovery logs if it happens a second time.

 

[exSD]

Sense-only?

 

[bigdee1974]

Sense-only?

Yes.

 

[kucluko]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

Is your battery draining, or not draining?

You'll need to give it a couple days to see how battery life will be.

For me, on the One XL, this kernel increases my battery life by over 50%.

Draining flar, but if lte its standby.. my battry its life when its on always.. so drain
And if you says need couple day,oke. I will be do it :thumbup:

Sent from my EVO using Tapatalk 2

 

[gmoe65]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

Will this work on 3.15 ROMs also?

It didn't work for me,my screen froze

Sent from my EVO using xda premium

 

[bigdee1974]

It didn't work for me,my screen froze

Sent from my EVO using xda premium

What ROM are you using? I am s-off, wiped cache and dalvik before and after flash, let settle for about 10 minutes and rebooted after it settled. I am not sure if this kernel will work for 3.15 ROMs but I can confirm it works with Arc-Reactor on NikLaTte and thicklizard said the same thing. I did not flash this kernel because there is no md5 to check.

 

[REVREN]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

What's up flar2, I'm loving the kernel its running great on viper 3.1.4.will you be updating the kernel to be able to overclock in the future?

 

[drlzanej]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

+1, OC /UV ???

Sent from my Htc EVO 4g LTE, because I threw that f***in iPhone out the window on the freeway

 

[Nooblube]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

What's up flar2, I'm loving the kernel its running great on viper 3.1.4.will you be updating the kernel to be able to overclock in the future?

Flar2 already made a OC kernel check the elementalX thread last few pages its 3.1 kernel.. Its based off 3.16.. Think this kernels just ment to be stable no oc.. elementalX 3.1 has oc and u can change voltage

Sent from my EVO using Tapatalk 2

 

[drlzanej]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

Im really pleased with this kernel so far, been running it for a few hours now with no glitches at all. My phone usually doesnt like custom kernels but seems to to be running great. Kind of made a point of useing it alot more than I normally do just to see how it would perform, how battery is overheating etc. Pretty impressive. I know it takes a couple days to get real battery results but im seeing an improvement already, im expecting itll probably get better.
As far as installing, the only problem i ran into was with Aroma, no touch....had to use volume and power to chose and procede. First attempt was 2.3.1.0, second was 2.3.3.0 and third was with latest TWRP. All with the same result. Could be my phone tho. Anyhow, all in all Im really likeing this kernel so far. Thanks again


Sent from my Htc EVO 4g LTE, because I threw that f***in iPhone out the window on the freeway

 

[gmoe65]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

What's up flar2, I'm loving the kernel its running great on viper 3.1.4.will you be updating the kernel to be able to overclock in the future?

Wow really ,:thumbup: cause it's not working for me on Viper

Sent from my EVO using xda premium

 

[flar2]

Maybe there's some particular setting that makes it not work with the viper Rom. I'm afraid that you guys will have to figure it out since I don't have the device and thus can't test. Strange though, as this kernel is close to stock.

 

[drob311]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

Flar2 already made a OC kernel check the elementalX thread last few pages its 3.1 kernel.. Its based off 3.16.. Think this kernels just ment to be stable no oc.. elementalX 3.1 has oc and u can change voltage

Sent from my EVO using Tapatalk 2

ElementalX is more of a "hacked" kernel. flar2 added the modules for oc and other edits for the other options. There is a HUGE difference between source compiled kernels and "hacked" kernels. :beer:

Edit: I'm not knocking or putting down elementalX kernel. Up until source was released elementalX was the only kernel I used with sense. Great work on both kernels! Much appreciated!

Sent from my EVO using Xparent BlueTapatalk 2

 

[flar2]

ElementalX is more of a "hacked" kernel. flar2 added the modules for oc and other edits for the other options. There is a HUGE difference between source compiled kernels and "hacked" kernels. :beer:

Edit: I'm not knocking or putting down elementalX kernel. Up until source was released elementalX was the only kernel I used with sense. Great work on both kernels! Much appreciated!

Sent from my EVO using Xparent BlueTapatalk 2

Actually I've released a beta version of elementalx built from source.

I know what you mean, but I just want to explain that kernel modules are simply a way to add functionality to a running kernel and are widely used in all linux distributions. It was far more difficult to create the modules without source than it is to build the kernel from source. But, yeah, stuff like overclocking and voltage control is better if it's built in.

 

[drob311]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

Actually I've released a beta version of elementalx built from source.

I know what you mean, but I just want to explain that kernel modules are simply a way to add functionality to a running kernel and are widely used in all linux distributions. It was far more difficult to create the modules without source than it is to build the kernel from source. But, yeah, stuff like overclocking and voltage control is better if it's built in.

Awesome... Thanks for clarifying... I'm gonna have to go get me that kernel. I'm running this kernel now and its running great. No complaints so far. If anything odd happens I will be sure to get you a logcat. Thanks again. :beer:

Sent from my EVO using Xparent BlueTapatalk 2

 

[fredgar75]

Re: [KERNEL] [Mar7] Bulletproof-1.0 | stockish with S2W and extended battery life

I tried flashing this on viper rom and it wouldn't get past the boot animation.

Sent from my EVO using Xparent BlueTapatalk 2

 

[flar2]

I tried flashing this on viper rom and it wouldn't get past the boot animation.

Sent from my EVO using Xparent BlueTapatalk 2

Is it rebooting? Or just hanging?

Nothing I can do about it without logs.

If it reboots, I need cat /proc/last_kmsg > last_kmsg.txt

If it's just hanging, go into adb shell and type dmesg > dmesg.txt