[KERNEL][Mini/MiniPro/LiveWithWalkman/Active] Rage Kernel v3.2 (ICS) and v3.0 (GB)

[dtb11288]

of course you can set 2GHz if you want )
but I always set my phone down to 768Mhz ) that's enough

 

[Kjuba]

Hi. I have problem. After Install this Kernel I don't connect my xperia mini pro with Sony Ericsson PC Companion with MTP mode or MSC Mode. Please help me?

 

[DuMOHsmol]

Kjuba, this can be my fault, I'll look it a bit later.

 

[Kjuba]

When you fix this?

 

[dumraden]

This isnt the OP's fault. MTP isnt working on kernels built for the mini's with DoomLoRD's sources.

Also... Why make a "new" kernel, when there are already kernels for these devices, which use THE EXACT SAME KERNEL SOURCES?

I mean it is redundant. Im not bashing on you, its nice to see people getting in the development business, but what would be better is if you could use some other kernel sources to build Kernels for the Mini's. I know i can't

 

[DuMOHsmol]

Of course, there aren't any unique features in this kernel. I've built my own just because I needed overclocking with working usb-otg support. Someone was also asking for voice recording support, so I've included it too. There were no other kernels with these particular features for mini pro.

 

[dumraden]

Huh? aren't those working in Krush Kernel?

 

[DuMOHsmol]

Usb-otg doesn't work there, phone thinks of mice and keyboards as of 'unknown devices' and DooMLoRD's usb-storage.ko doesn't load either, so I can't connect flash drives. I don't know for certain about voice recording, but it seems there is no that patch.

 

[kris010976]

Hi DuMOHsmol,

1 Question can i flash this kerner to my phone that using
S51se .61 with KRsH kernel flash.

Did i need to flash the mango stock modules first before i flash you kernel.

thanks in advance.

 

[DooMLoRD]

This isnt the OP's fault. MTP isnt working on kernels built for the mini's with DoomLoRD's sources.

MTP is works on ARC & PLAY...

just disconnect from USB
go to Settings -> Sony Ericsson -> Connectivity -> USB connection mode -> MTP
now connect device to PC via USB

thats it

 

[DuMOHsmol]

Finally tested MTP, it works on my phone (Mini Pro). If windows sees phone as media device, but doesn't show files (I had this problem at first), try removing your device via device manager and reconnecting, so your pc will be forced to reinstall driver. Also try rebooting your phone and computer. Some time ago, when I was on stock kernel, I had problems with MTP too, so it doesn't seem to be a problem of modified kernel.

 

[Izzy Stinson]

Hey is this kernel the best for gaming and battery saving? Im looking for a best kernel for my SK17i.

It said can overclock to 2ghz. Does this mean I have to install a third party app such as setcpu or nofrill to overclock my device to 2ghz? Or 2ghz overclocked is already set on boot. Im quite confuses about this

Sent from my SK17i using XDA App

 

[IMRAND]

Well there are only two kernels available for sk17i as of now, you can use either KRsH or rage kernel.

you have to use third party apps to set 2ghz.

as far as battery concern iam waiting for KRsH new kernel which is in test now.

 

[dzsemx]

battery usage little better than KRSH kernel, 1% per 50 min in flight mode

 

[Izzy Stinson]

Well there are only two kernels available for sk17i as of now, you can use either KRsH or rage kernel.

you have to use third party apps to set 2ghz.

as far as battery concern iam waiting for KRsH new kernel which is in test now.

So have you tried overclocking your device to 2ghz with this kernel. Is it stable?

Sent from my SK17i using XDA App

 

[IMRAND]

I really don't need 2ghts but I tried with set cpu & it works well.

 

[DuMOHsmol]

Izzy Stinson, on my phone 2 GHz isn't stable (phone hangs after 3 secs), but 1.9 GHz is stable, though phone becomes very warm after some time of active usage.

 

[dumraden]

Unfortunately it bootloops on my Active with Spartan 1.4...

 

[Izzy Stinson]

Izzy Stinson, on my phone 2 GHz isn't stable (phone hangs after 3 secs), but 1.9 GHz is stable, though phone becomes very warm after some time of active usage.

Hey, what would I set up the min. Clock frequencies and the Governor to if I want to use your kernel for longer battery life while overclocking it to at least 1.5ghz on no frills or setcpu?

Ill probably gonna flash ur kernel tonight.

Btw how to know I already unlocked my bootloader or not? My phone is rooted though

Sent from my SK17i using XDA App

 

[neroyoung]

I have tested this on my XMP
By default CPU is on 1024 MHz but can be slide upto 2 GHz
just i miss one thing the KrSH logo,will you please add some cool logo in your kernal ?
I would love that