@ShivangDave It would be great if you could add 133 mhz along with the current gpu overclock frequency
Thanks in advance
Thanks in advance
@ShivangDave It would be great if you could add 133 mhz along with the current gpu overclock frequency
Thanks in advance
Can't add two gpu frequencies in 1 kernel it has to be specified while compiling...
I think you could give 220 mhz gpu overclock a try and test it for stability.
I would be very grateful to u.
And I would suggest if you could kindly see if there is a way to put the GPU in sleep mode when the screen is off.
Thanks in advance.
I would try these all myself but I have no knowledge of kernel building.
I am simply an advanced user who tries to understand and give helpful suggestions whenever possible.
I have just flashed through fastboot , booted successfully.
Is OC enabled ? If so how can I set it ?
is there any thing else I have to do after flashing through fast boot , because after flashing though fast boot I just booted and did nothing.
Please let me know if I am missing anything .
Install no frills cpu and change frequencies as per your needs...
I have installed and I can see only 1.0 Ghz as maximum.
Can you please tell me what is the best combination for basic mode usage.
Install no frills cpu and change frequencies as per your needs...
Oh you were asking about JLO.. I'm sorry JLO's kernel was cancelled because it wasn't working.. Don't use my kernel on JLO..
Can I flash this on stock rom??
I tried but device didnt boot up.
I badly want the recovery mode I tried many recoveries, but none of them are working.
yes
---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------
YES
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
[COLOR="Red"] * Flashing kernel requires unlocked bootloader.
[/COLOR] * You can unlock your bootloader from [URL="http://unlockbootloader.sonymobile.com/"][COLOR="Blue"][U]here[/U][/COLOR][/URL].
*/
* OverClocked upto 1.3Ghz !
* Based on Latest Official sources
* Compiled using Linaro 4.6 Toolchain
* Integrated CWM and TWRP Touch
* init.d support
* Ext 2/3/4 Support
* persistent adb
* Added frandom
* Salvaged RAM
* Tiny RCU
* ro.secure=0 : Root exploit enabled via adb
* Removed debugging s**ts
* Governors : InteractiveX
OndemandX
Performance
Ondemand
Interactive
Powersave
Conservative
Smartass2
minmax
* IO Shedulers : sio
deadline
noop
cfq
VR
row
ZEN
* Frequencies: 122 Mhz
245 Mhz
320 Mhz
480 Mhz
600 Mhz
800 Mhz
900 Mhz
1.008 Ghz
1.114 Ghz
1.229 Ghz
1.306 Ghz
* GPU OC: 190 Mhz(in v2)
[/B]
[COLOR="Purple"]Root Binary[/COLOR] : ( Flashable via recovery )
* SuperSU : [URL="http://download.chainfire.eu/204/SuperSU/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
* Superuser : [URL="http://androidsu.com/superuser/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
[COLOR="Purple"]Instructions[/COLOR] :
* Flash the boot partition with the kernel in fastboot mode.
* Guide : [URL="http://xdaforums.com/showthread.php?t=1879982"][COLOR="Blue"][U]Here[/U][/COLOR][/URL]
[center]
[U][URL="http://shivangdave.com/roms/"][COLOR="BROWN"]Mesona v1 [No GPU OC] [/URL][/U][/COLOR][/center]
[center]
[U][URL="http://shivangdave.com/roms/"][COLOR="BROWN"]Mesona v2 [GPU OC] [/URL][/U][/COLOR][/center]
[center]
[U][URL="http://shivangdave.com/roms/"][COLOR="BROWN"]Tapioca v1 [NO GPU OC] [/URL][/U][/COLOR][/center]
[center]
[U][URL="http://shivangdave.com/roms/"][COLOR="BROWN"]Tapioca v2 [GPU OC] [/URL][/U][/COLOR][/center]
[center]
[STRIKE][U][URL="http://shivangdave.com/roms/"][COLOR="BROWN"]Jlo Test build [GPU OC] [/URL][/U][/COLOR][/center][/STRIKE]
Miro/Tipo v1:
* Initial Release..
* No RAMDUMP issue !
* Latest Sources..
Miro/Tipo v2:
* GPU Overclocked upto 190 Mhz !
* Updated toolchain..
[/B]
yes
---------- Post added at 03:24 PM ---------- Previous post was at 03:23 PM ----------
YES