[KERNEL][MM][DRM FIX] EliteKernel v3.4.33 [UB]

[aaiko]

Sorry but this work with stock prerooted rom?

 

[ryandxter]

Using it for a while now with existenz 5.1, all works excellent, no known bugs as such, i havent had random reboots or anything, thanks alot, it works so smooth, i only have 1 request, could you maybe please add the adreno idler in next update?

Sent from my D6603 using XDA-Developers mobile app

what's your installation step? does like this by mr @Mistkäfervertreiber ?

My steps:
1 Backup TA
2 Ulock Bootloader
3 Boot into Recovery
4 Flash XZDRremovel and don't reebot (Recovery or System)
5 Flash Elite Kernel

Work's with PureX

Gesendet von meinem D6603 mit Tapatalk

 

[Morteza893]

Work android 5.1.1 z3??????????

 

[SnoopyOne]

Work android 5.1.1 z3??????????

This is for Android 6.0.1 only,if you want to use in 5.1.1,go here(AndroPlus Kernel)

 

[Morteza893]

Qc 2.0 working?????????

 

[SnoopyOne]

Qc 2.0 working?????????

Maybe it supports...You can try.

 

[Morteza893]

Maybe it supports...You can try.

I test but not working with qc 2.0 charger

 

[SnoopyOne]

I test but not working with qc 2.0 charger

Try with this(you need this to fully support QC 2.0):
http://forum.xda-developers.com/xperia-z2/development/sony-secret-revealed-qc-2-0-t3163490

 

[blackhawk_LA]

@ShadowElite have you thought about implementing fast hotplug from pec0ra? I remember using it on my Z2 and it was by far the best hotplug solution.

Sent from my D6603 using Tapatalk

 

[corpsegrinder62]

what's your installation step? does like this by mr @Mistkäfervertreiber ?

Since i dont have TA keys, i just used twrp, flashed rom clean, let it first boot, i had an odd bootloop just before boot if i installed with rom together, after rom booted i installed kernel, and all worked 100% thereafter, and as it states drm keys do work, no need to flash fix

Sent from my D6603 using XDA-Developers mobile app

 

[Morteza893]

Try with this(you need this to fully support QC 2.0):
http://forum.xda-developers.com/xperia-z2/development/sony-secret-revealed-qc-2-0-t3163490

I install Jackos_QuickCharge2.0_rev5.zip
But not working

 

[SnoopyOne]

I install Jackos_QuickCharge2.0_rev5.zip
But not working

Then maybe it don't -_-

 

[perobot]

Hi

For now without my Z3 I'm on vacation now use my HTC 10 when I reinstate the guards would use it again, postscript add support (synapse) please tell them that as tuned last the Z3 will remove your heat pipe stock and put two new excellent copper and walk almost completely dissipates heat use Artic Silver 5 thermal paste.:victory::victory:

 

[SnoopyOne]

Can you provide me a photo of N preview logo?

Here it is,same as the X series.
Left is Z3 with N preview,and Right is X performance.

Edit: So you can port this from X performance Kernel,Just decompile it and take the logo.rle file.

Edit2: Got the kernel from AndroPlus but it doesn't have logo.rle file
Maybe it uses different file?

Edit3: I created one .rle file and upload it here(white_sony.zip)You can try it.
It is the same as the X boot logoas seen in the screenshot below.

Edit4: I packed my .rle to your kernel and try,but it still shows the black Sony Xperia logo @ShadowElite Can you do it when you have some free time?
I Attached my logo here.

 

[ben75011]

Hi, does this Kernel work with SLIMM 2.5???
Thanks

 

[Juventus1897]

Hi, if I've installed this kernel and then flash xposed, will I get bootloop?

Sent from my D6603 using XDA-Developers mobile app

 

[TrumpCard]

Kernel gang, switch lanes.

I'm on Fragment v2 at the moment. Flashed the kernel; this results in the phone attempting the boot once, rebooting, and then heading into recovery. I flashed the ROM and it worked fine. This is probably a stupid question, but is there any way to tell if this kernel installed correctly?

---------- Post added at 11:09 PM ---------- Previous post was at 10:51 PM ----------

Hi, if I've installed this kernel and then flash xposed, will I get bootloop?

Sent from my D6603 using XDA-Developers mobile app

+1

 

[ojessie]

Kernel gang, switch lanes.

I'm on Fragment v2 at the moment. Flashed the kernel; this results in the phone attempting the boot once, rebooting, and then heading into recovery. I flashed the ROM and it worked fine. This is probably a stupid question, but is there any way to tell if this kernel installed correctly?

---------- Post added at 11:09 PM ---------- Previous post was at 10:51 PM ----------


+1

Had the same problem

 

[shamsul007]

Kernel gang, switch lanes.

I'm on Fragment v2 at the moment. Flashed the kernel; this results in the phone attempting the boot once, rebooting, and then heading into recovery. I flashed the ROM and it worked fine. This is probably a stupid question, but is there any way to tell if this kernel installed correctly?

---------- Post added at 11:09 PM ---------- Previous post was at 10:51 PM ----------


+1

Settings > About Phone and check kernel version.

Also check Kernel Auditor, you should see more settings that can be tweaked. Also reboot into your recovery, you should see more settings there also (you'll be able backup more partitions etc)

I only used it a few days and I thought it was a great kernel and it works with xposed. Unfortunately I was messing around too much and got into a bootloop. I'm too lazy and rather than finding a fix, I just flashed stock kernel.sin in flashtool, restored my TA partition to relock my bootloader and restored a TWRP back up from before I flashed EliteKernel.

 

[TrumpCard]

Yeah it doesn't seem to have installed correctly. Would flashing my ROM have undone any changes?
Either way, I can't seem to get it work with Fragment I guess.

I had flashed this through recovery, so would flashing it through fastboot make any difference?