[KERNEL] [N4] [6.0][3.4.0][AOSP/CM] [10/26] [M2] - AK

[tvisforme]

Sorry for asking again, but I have not had a response yet... has development of the CM10.2 version ceased with v103? Is anyone here using v103 with nightlies after the 8th? No complaints if development has stopped for 10.2, but I would like to know if I should wait or move on. Thanks.

Sent from my Nexus 4 using Tapatalk

 

[ak]

Sorry for asking again, but I have not had a response yet... has development of the CM10.2 version ceased with v103? Is anyone here using v103 with nightlies after the 8th? No complaints if development has stopped for 10.2, but I would like to know if I should wait or move on. Thanks.

Sent from my Nexus 4 using Tapatalk

you can use cm11 kernel, the base is the same.

 

[dd0s]

crDroid + this Kernel = Awesome Batterylife. Love it. My new favourit kernel.

Sent from my Nexus 4 using xda app-developers app

 

[XGX5309]

What is the security of the wifi university?
what is the problem?

Probably 802.1x EAP or CHAP.

I'm having the same issue. This kernel doesn't like that type of network. We're using EAP here and I've had to restart twice today because it'll connect and be fine for a while, but then it'll orange-out in the quick settings panel, then when I go to switch WiFi off/on and my settings freeze up.

I think that protocol will send out a reauth request every 90 minutes or so, depending on network configuration. I think that's where the problem is. It may not actually be kernel related, though I haven't looked into what Google changed in KK's protocol stack.

 

[misterk267]

What is the security of the wifi university?
what is the problem?

Just as the previous post said, the network type is 802.1x with PEAP and mschapv2.

Sent from my Nexus 4

 

[opensourcenoob]

Just need a confirmation about kernel

Hi all, I have read and searched for terms like CAF, and I just heard of it today, so I don't really have any grip on it. I just know that CAF is a little bit different with AOSP

So down to the question, a really simple one, and hopefully anyone answering will not be mad of the simple question.

1. If I have AOSP ROM running; can I flash CAF kernel to it WITHOUT any bugs caused by code differences etc?

I guess that is the only question, because when I searched, developers and other people saying that Installing CAF ROM with AOSP Kernel is a recipe for bugs.

Hopefully anyone can help, with some evidence maybe? Or if @anarkia1976 answered, I'll just take his words. hehe

Thanks before !

 

[FxJohnnyEng]

Ak 119 Kit Kat Kernel Problems!!!

Everything works fine, overclocking is good, but
problem is
no Sweep to wake my nexus 4, keep pressing power button, how to activate sweep to wake????
i install touch control, not working as well
need help!!!!

 

[ZULU2189]

Everything works fine, overclocking is good, but
problem is
no Sweep to wake my nexus 4, keep pressing power button, how to activate sweep to wake????
i install touch control, not working as well
need help!!!!

I believe you can only activate it through trickster mod, if I'm not mistaken.

 

[McLeod5000]

S2w is not implemented in 119. Wait for next version. It will be there again. Or get back to an older version.

Gesendet von meinem Nexus 4 mit Tapatalk

 

[SHiFT!]

http://forum.xda-developers.com/showpost.php?p=47380950&postcount=251
What you can tell by the my results?

 

[Targaeryan]

Hi all, I have read and searched for terms like CAF, and I just heard of it today, so I don't really have any grip on it. I just know that CAF is a little bit different with AOSP

So down to the question, a really simple one, and hopefully anyone answering will not be mad of the simple question.

1. If I have AOSP ROM running; can I flash CAF kernel to it WITHOUT any bugs caused by code differences etc?

I guess that is the only question, because when I searched, developers and other people saying that Installing CAF ROM with AOSP Kernel is a recipe for bugs.

Hopefully anyone can help, with some evidence maybe? Or if @anarkia1976 answered, I'll just take his words. hehe

Thanks before !

Most of the users here are running KitKat AOSP uilds with the AK KitKat kerel which includes CAF without any issues :victory::good:

 

[FxJohnnyEng]

S2w is not implemented in 119. Wait for next version. It will be there again. Or get back to an older version.

Gesendet von meinem Nexus 4 mit Tapatalk

I am using Kit Kat 4.4 now, which kernel can be used expect 119?

 

[saint_cow]

I am using Kit Kat 4.4 now, which kernel can be used expect 119?

I would wait for the next version as it's supposed to be fixed. It caused screen issues before ( screen wouldn't turn on)

Sent from my Nexus 4 using xda app-developers app

 

[ma678]

My N4 cannot wake up after enabling MPS to 1. Everything works fine after turning it off.

@anarkia1976 can you confirm that multicore power saving is fine. i'm getting shutdowns and reboots with that option enabled.

 

[androiduser44]

me too

 

[ak]

[KITKAT - CAF]

• ak kernel download: AK.126.KK
• Github Kernel: Link

[CM11 - CAF]

• ak kernel download: AK.126.CM11
• Github Kernel: Link

changelog:
+ linux 3.4.69
+ removed touchwake
+ removed multicore power saving
+ revert intelli plug and intellidemand to old suspend drivers
+ updating powersuspend
+ updating intellu plug
+ updating intellidemand
+ reworked s2w to Myfluxi style
+ ecc ecc ecc

I have see 2300 donwloads for old kernel ... but only 16 thanks.
----> http://forum.xda-developers.com/showpost.php?p=47286935&postcount=1117
The only way to repay having no profit is:
rate the thread and press the thanks button

Diff changelog:

Project name: AK KERNEL
anarkia1976 - Kernel Version: AK.126.KK
Greg Kroah-Hartman - Linux 3.4.69
Alex Deucher - drm/radeon/atom: workaround vbios bug in transmitter table on rs780
Chris Wilson - drm: Prevent overwriting from userspace underallocating core ioctl structs
Khalid Aziz - mm: fix aio performance regression for database caused by THP
Dan Carpenter - aacraid: missing capable() check in compat ioctl
Ming Lei - lib/scatterlist.c: don't flush_kernel_dcache_page on slab page
Baruch Siach - xtensa: don't use alternate signal stack on threads
Dan Carpenter - uml: check length in exitcode_proc_write()
Dan Carpenter - Staging: bcm: info leak in ioctl
Dan Carpenter - staging: ozwpan: prevent overflow in oz_cdev_write()
Takashi Iwai - ASoC: dapm: Fix source list debugfs outputs
Takashi Iwai - ASoC: wm_hubs: Add missing break in hp_supply_event()
Takashi Iwai - ALSA: hda - Add a fixup for ASUS N76VZ
Helge Deller - parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM
Thomas Gleixner - clockevents: Sanitize ticks to nsec conversion
Lukasz Dorau - md: Fix skipping recovery for read-only arrays.
Gwendal Grignou - libata: make ata_eh_qc_retry() bump scmd->allowed on bogus failures
Marc Kleine-Budde - can: flexcan: flexcan_chip_start: fix regression, mark one MB for TX and abort pending TX
Dave Kleikamp - jfs: fix error path in ialloc
Mark Cave-Ayland - rtlwifi: rtl8192cu: Fix error in pointer arithmetic
Felix Fietkau - mac80211: update sta->last_rx on acked tx frames
Emmanuel Grumbach - mac80211: correctly close cancelled scans
Алексей Крамаренко - USB: serial: ftdi_sio: add id for Z3X Box device
Oliver Neukum - USB: quirks: add touchscreen that is dazzeled by remote wakeup
Oliver Neukum - USB: quirks.c: add one device that cannot deal with suspension
Fangxiaozhi (Franko) - USB: support new huawei devices in option.c
Paul Reioux - intelli_plug: add mutext protection around input work
Paul Reioux - kernel/power/powersuspend: default to userspace for now
yank555-lu - kernel/power/powersuspend: add back userpace control w/ default kernel control
yank555-lu - kernel/power/powersuspend: remove userspace dependency from powersuspend
anarkia1976 - board-8064: Disable standalone power collapse
anarkia1976 - cyanogen_mako_defconfig: remove old logic for power saving with MC and SMT
anarkia1976 - cpufreq: intellidemand: return to standard early suspend driver
anarkia1976 - intelli_plug: return to standard early suspend driver
anarkia1976 - intellidemand: enable touch boost for new touch screen device
anarkia1976 - intelli_plug: revert to aggressive hotplug - bump to v2.0
Paul Reioux - intelli_plug: add touch input logic
anarkia1976 - sweep2wake: disable at boot, enable when you want
anarkia1976 - cyanogen_mako_defconfig: enable TOUCHSCREEN_SWEEP2WAKE
myfluxi - mako: touch: Hacky solution for unresponsive screen
myfluxi - sweep2wake: Cleanup
myfluxi - mako: touch: Do not boost touch while suspended
myfluxi - touch_synaptics: Loop until i2c is awake
Dennis Rassmann - drivers/touchscreen: add lge_touch android_touch kobject to fix s2w in one position across devices
Dennis Rassmann - drivers/touchscreen: add pmops and allow i2c to wake the device (even w/o ES/LR)
Dennis Rassmann - sweep2wake: fix last touch not being released
Dennis Rassmann - drivers/touchscreen: add sweep2wake

 

[FxJohnnyEng]

[KITKAT - CAF]

• ak kernel download: AK.126.KK
• Github Kernel: Link

[CM11 - CAF]

• ak kernel download: AK.126.CM11
• Github Kernel: Link

changelog:
+ linux 3.4.69
+ removed touchwake
+ removed multicore power saving
+ revert intelli plug and intellidemand to old suspend drivers
+ updating powersuspend
+ updating intellu plug
+ updating intellidemand
+ reworked s2w to Myfluxi style
+ ecc ecc ecc

I have see 2300 donwloads for old kernel ... but only 16 thanks.
----> http://forum.xda-developers.com/showpost.php?p=47286935&postcount=1117
The only way to repay having no profit is:
rate the thread and press the thanks button

Diff changelog:

How to activate sweep to wake?
after flash ak 126, still cant use it

---------- Post added at 04:12 PM ---------- Previous post was at 04:10 PM ----------

[KITKAT - CAF]

• ak kernel download: AK.126.KK
• Github Kernel: Link

[CM11 - CAF]

• ak kernel download: AK.126.CM11
• Github Kernel: Link

changelog:
+ linux 3.4.69
+ removed touchwake
+ removed multicore power saving
+ revert intelli plug and intellidemand to old suspend drivers
+ updating powersuspend
+ updating intellu plug
+ updating intellidemand
+ reworked s2w to Myfluxi style
+ ecc ecc ecc

I have see 2300 donwloads for old kernel ... but only 16 thanks.
----> http://forum.xda-developers.com/showpost.php?p=47286935&postcount=1117
The only way to repay having no profit is:
rate the thread and press the thanks button

Diff changelog:

After flash 126AK kernel, i still cant use sweep to wake? how to activate?
using 4.4 Kit kat. Thanks

---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------

[KITKAT - CAF]

• ak kernel download: AK.126.KK
• Github Kernel: Link

[CM11 - CAF]

• ak kernel download: AK.126.CM11
• Github Kernel: Link

changelog:
+ linux 3.4.69
+ removed touchwake
+ removed multicore power saving
+ revert intelli plug and intellidemand to old suspend drivers
+ updating powersuspend
+ updating intellu plug
+ updating intellidemand
+ reworked s2w to Myfluxi style
+ ecc ecc ecc

I have see 2300 donwloads for old kernel ... but only 16 thanks.
----> http://forum.xda-developers.com/showpost.php?p=47286935&postcount=1117
The only way to repay having no profit is:
rate the thread and press the thanks button

Diff changelog:

After flash 126AK kernel, i still cant use sweep to wake? how to activate?
using 4.4 Kit kat. Thanks

 

[Gnome]

How to activate sweep to wake?
after flash ak 126, still cant use it

---------- Post added at 04:12 PM ---------- Previous post was at 04:10 PM ----------


After flash 126AK kernel, i still cant use sweep to wake? how to activate?
using 4.4 Kit kat. Thanks

---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------


After flash 126AK kernel, i still cant use sweep to wake? how to activate?
using 4.4 Kit kat. Thanks

Use TricksterMod and go to Specific TAB, go down, look for sweep to wake, then enable it.

 

[BLADESMAN1889]

In OP it says TC support. Is this for bponary app ?

Sent from NEXUS⁴ via XDA Prem [SLIMKAT 4:4]​

 

[ak]

In OP it says TC support. Is this for bponary app ?

Sent from NEXUS⁴ via XDA Prem [SLIMKAT 4:4]​

i have enable necessary config ... but you have to write on the developer thread for support.