[KERNEL] [Nov 26] ElementalX-m8 (7.01 Sense) (6.04 GPE)

Search This thread


Senior Member
Feb 6, 2015
Since it's being said that 6.03 (gpe) seems like a good match for Sense based roms, can I try flashing it on my S-ON device with S-ROM JW?
I'm not much into changing clock speeds. I just want the USB fast charge and High Definition Audio :)
Also, which formats does the high definition audio mean. 24-bit/192kHz FLAC?

Thank you :)


Senior Member
Dec 1, 2014

Just installed 7.00.1 sense on my m8 running jw7.5 ..... i checked it out in elemental app and this what i got

Has anyone else got crazy idle drain like this....

Sent from my HTC M8 using Tapatalk


Jul 6, 2009
Since it's being said that 6.03 (gpe) seems like a good match for Sense based roms, can I try flashing it on my S-ON device with S-ROM JW?
I'm not much into changing clock speeds. I just want the USB fast charge and High Definition Audio :)
Also, which formats does the high definition audio mean. 24-bit/192kHz FLAC?

Thank you :)
i have same interest, did you get any info about Hi-Res audio formats?


Senior Member
Feb 6, 2015
i have same interest, did you get any info about Hi-Res audio formats?

Nope, nothing yet.
As per GSMArena, the regular One M8 supports 24-bit/192kHz audio, not sure if that's applicable only for the Harman Kardon version.
I'm interested to know if this kernel enables the HK audio on regular One M8 or does something better than 24-bit/192kHz audio.

Top Liked Posts

  • There are no posts matching your filters.
  • 296

    Kernel for HTC One (m8) Sense and Google Play Edition
    (Not for Sprint or Verizon)

    • Easy installation with Aroma installer
    • overclocking
    • gboost for enhanced gaming performance
    • choose voltage profile in installer
    • full user voltage control
    • underclock CPU or GPU
    • i/o schedulers: FIOPS, SIO, CFQ, NOOP, ROW, BFQ, deadline, zen
    • optional sweep2sleep
    • optional custom wake gestures (no motion required!)
    • optional pocket detection (with custom wake gestures)
    • option to disable volume button wakes camera (with custom wake gestures)
    • High Definition Audio capability
    • optional USB fastcharge
    • option to reduce vibration strength
    • remove /system write protection
    • NTFS r/w, CIFS, exFAT support
    • option to disable fsync
    • option to disable magnetic cover
    • /dev/frandom support
    • multirom support
    • color and gamma control
    • DriveDroid support
    • optimized -O3 linaro 4.9.1

    Google+ Community


    1. Install zip from recovery
    2. Follow the instructions, if you don't know what to do, use the preselected options
    3. Reboot

    It is recommended to disable or increase the screen timeout in TWRP recovery. If the screen timeout is enabled in TWRP, there may be a black screen after exiting the Aroma installer. This is nothing to worry about. Simply hold power and volume down until it reboots. The installation will be fine.

    Please consider a donation to support ongoing development
    Many thanks to those who have donated!


    Sense (Android 6.0)

    GPE (Android 6.0)

    Sense (Android 5.0.1/5.0.2)


    ElementalX Configuration File
    Your choices in the Aroma installer are used to build a configuration file. The config file is located at /etc/elementalx.conf. You can edit this file to change kernel settings. Whatever is set in this file will take effect when the device is booted (unless other scripts or apps interfere!)

    If settings are not sticking:[*]Make sure you have busybox installed correctly and updated to the latest version[*]Make sure the file permissions for /etc/init.d/99elementalx are set to execute. [*]Check to see if any /etc/init.d scripts or apps (such as Kernel Tuner or TricksterMod) are interfering with your settings.

    ElementalX Log File
    Every boot, a log file is created at /data/local/tmp/elementalx-kernel.log. This file shows the date and time and all settings that have been applied. Use this to verify and troubleshoot configuration options.

    Overclocking is optional. The installer lets you choose the maximum frequency. Whatever frequencies you chose in the installer will be set at boot for each CPU. Not all devices can handle overclocking. I don't recommend overclocking, this device is fast enough. If you overclock, the CPU frequency will likely be throttled due to heat. I recommend the stock frequencies, as this device is plenty fast.

    CPU voltages
    The installer allows you to choose from several undervolting options: stock, -15mV, -30mV, or -45mV. This only undervolts the lowest frequency, which happens to be the frequency used the most, and this is safer. Be careful, lowering voltages can cause instability.

    gboost enhances gaming performance by giving a slight boost to cpu frequencies when the graphics load is high (e.g. while gaming). It should have no effect on battery life during regular usage, so it's safe to leave it enabled all the time.

    fsync can be disabled if you're looking for the last ounce of performance. I recommend leaving it enabled as there is a slight risk of data loss if your phone shuts off unexpectedly before filesystems are synced.

    Installing a new ROM
    If you install a new ROM, it will probably replace this with the stock kernel and will definitely overwrite /etc/init.d/99elementalx and /etc/elementalx.conf so you will lose your settings and certain features. So always reinstall the kernel after installing a ROM.

    Sweep2sleep allows you to put your device to sleep by swiping right to left across the bottom of the screen where the back, home, recent buttons are. I find this useful since the stock motion gestures do not provide a good way to turn off the screen.


    0= disabled
    1= sweep2sleep right enabled
    2= sweep2sleep left enabled
    3= sweep2sleep left and right enabled

    USB fastcharge
    USB fastcharge is optional. This will allow you to charge at a faster rate when connected to a USB port. The default limit for USB ports is 500ma, this increases it to 1100ma. Be sure that the computer/laptop/whatever you are plugged into can handle it. Some will automatically cap it at 500ma. Please note that this does not force AC charge mode like previous implementations of force fastcharge. Your battery setting will still say USB mode. You can edit /etc/elementalx.conf to change the setting on boot.

    Wake Gestures

    There are three modes
    • Mode 1: Stock Motion Launch Gestures
      For stock motion launch gestures, /sys/android_touch/wake_gestures, /sys/android_touch/sweep2wake and /sys/android_touch/doubletap2wake must all be set to 0. Enabling any of these overrides the stock gestures. Obviously Motion Launch Gestures must be enabled in the system settings.

    • Mode 2: Remove motion requirement
      For this, you must set /sys/android_touch/wake_gestures to 1 and enable at least one gesture in /sys/android_touch/sweep2wake or /sys/android_touch/doubletap2wake and Motion Launch Gestures must be enabled in system settings. In this mode, when you sweep or doubletap, the appropriate input events are generated and acted upon the EasyAccessService (i.e., the system app that handles gesture actions).

    • Mode 3: Traditional S2W/DT2W
      In this mode, wake gestures and actions are handled entirely by the kernel. The gestures will turn on the screen and that's it. For this, you must set /sys/android_touch/wake_gestures to 0 and enable at least one gesture in /sys/android_touch/sweep2wake or /sys/android_touch/doubletap2wake. It doesn't matter if Motion Launch Gestures is enabled or disabled in system settings, the gestures don't interact with it in this mode.


    For modes 2 and 3, there are several options.

    • Sweep2Wake

      Sweep right......1
      Sweep left........2
      Sweep up.........4
      Sweep down....8

      Add up the values for each gesture you want to enable and put the total in /sys/android_touch/sweep2wake. For example, to enable all gestures, the value is 15 (1+2+4+8). To enable sweep right, sweep left and sweep up, the value is 7 (1+2+4)

    • DoubleTap2wake

      Set /sys/android_touch/doubletap2wake to 1 to enable DT2W, and set to 0 to disable it.

    • Pocket Detection

      Set /sys/android_touch/pocket_detect to 1 to enable pocket detection, and set to 0 to disable it. Pocket detection is experimental right now, I'd say it's about 90% functional, but there is an occasional bug where it either doesn't work or works too well.

    • Vibration Strength

      Haptic feedback can be enabled for the wake gestures in /sys/android_touch/vib_strength. This setting takes a number between 0 and 60. Default is 20, which is the same vibration as the stock gestures. Setting this to 0 disables haptic feedback.



    XDA:DevDB Information
    ElementalX-m8, Kernel for the HTC One (M8)

    Source Code: https://github.com/flar2/

    Kernel Special Features:

    Version Information
    Status: Stable
    Current Stable Version: 7.01
    Stable Release Date: 2016-11-26

    Created 2014-04-04
    Last Updated 2017-03-29

    Let's see how this works.

    Download (Sense Android 4.4.4):

    -update to Android 4.4.4

    Oct 7, 2014: ElementalX-m8-1.08
    -fix backlight setting in installer

    Oct 6, 2014: ElementalX-m8-1.07
    -update backlight dimmer
    -lyapota's sound tweaks
    -fix pocket detection

    September 14, 2014: ElementalX-m8-1.06
    -fix backlight dimmer setting in installer

    September 14, 2014: ElementalX-m8-1.04
    -add backlight dimmer option
    -update to fauxsound 3.6

    September 10, 2014: ElementalX-m8-1.04
    -update msm-sleeper

    Aug 25, 2014: ElementalX-m8-1.03
    --update latest HTC source code
    --various optimizations

    Aug 8, 2014: ElementalX-m8-1.02
    -update fauxsound drivers

    Aug 3, 2014: ElementalX-m8-1.01-Sense
    -update installer

    Aug 3, 2014: ElementalX-m8-1.01-GPE
    -update HTC source code for GPE 4.4.4
    -update installer
    -fix touch driver not loading

    July 27, 2014: ElementalX-m8-1.00-Sense
    -update to latest HTC source code
    -fix CIFS support
    -compatibility with ElementalX Kernel app
    -add vibration setting to elementalx.conf

    June 20, 2014: ElementalX-m8-0.19
    -lz4 compression
    -stereo call recording support
    -security updates
    -various tweaks and optimizations
    -custom Venom Tweaks support
    -wake gestures: compatibility with Dot View Case

    June 3, 2014: ElementalX-m8-1.00-GPE
    -update for GPE Android 4.4.3

    May 25, 2014: ElementalX-m8-0.18
    -add proximity enabled flag
    -adjust sensor initialization

    May 24, 2014: ElementalX-m8-0.17
    -O3 optimization
    -allow more time for sensor initialization
    -adjust gesture algorithm to better prevent accidental sweeps
    -added some debugging messages for proximity detector (Sense version only)

    May 19, 2014: ElementalX-m8-0.16
    -build with Linaro GCC 4.9.1 toolchain (@Christopher83)
    -boot delay for custom wake gestures
    -GPE version added

    May 13, 2014: ElementalX-m8-0.15
    -option to disable volume buttons launch camera in landscape

    May 12, 2014: ElementalX-m8-0.14
    -fix custom gestures in dot view mode
    -improvements to pocket detection
    -fix startup of mcu
    -update installer

    May 9, 2014: ElementalX-m8-0.13
    -fix vibrations during phone calls when wake gestures enabled
    -fix proximity sensor not working properly during calls
    -fix wake gestures not working with certain firmware
    -update installer

    May 7, 2014: ElementalX-m8-0.12
    -update slimbus oc (poondog/zeroinfinity)
    -fix installer (incorrect vibration setting)

    May 7, 2014: ElementalX-m8-0.11
    -add wake gestures
    -add sweep2sleep options
    -update installer

    April 29, 2014: ElementalX-m8-0.10
    -enable high definition audio
    -remove hardfloat flag
    -add GPU governor option
    -add GPU underclocking
    -update installer (thanks @jonas2295 for the new splash!)

    April 20, 2014: ElementalX-m8-0.9
    -update installer
    -adjust voltages
    -add underclocking
    -add option to disable magnetic cover sensor
    -reduce logspam
    -fix pvs readout

    April 14, 2014: ElementalX-m8-0.8
    -update installer
    -adjust oc voltages
    -change undervolting
    -add voltage control (thanks @myfluxi)

    April 13, 2014: ElementalX-m8-0.7
    -update installer
    -add gboost
    -bump oc voltages

    April 12, 2014: ElementalX-m8-0.6
    -update to HTC 1.54 kernel source
    -add option for reduced button vibration
    -add faux123 sound support
    -use custom dt.img

    April 10, 2014: ElementalX-m8-0.5
    -add max screen off frequency (default 1090MHz)
    -fix overclocking and adjust voltages
    -add more overclocking steps
    -add thermal options

    April 6, 2014: ElementalX-m8-0.4
    -update ramdisk
    -update installer
    -revert some changes so stock modules will load
    -show pvs bin in sysfs
    -exfat working (uses stock texfat module)
    -remove F2FS support
    -use stock wifi module
    -add CIFS and NTFS support
    -add PS3 controller support
    -tcp congestion control options
    -add DriveDroid support

    April 5, 2014: ElementalX-m8-0.3
    -add Aroma installer
    -undervolting options

    April 4, 2014: ElementalX-m8-0.2
    -Fastcharge for HTC One m8
    -LCD_KCAL Colour Control for m8
    -exFAT support
    -FS: import F2FS
    -fix for app-mounted directories
    -DRIVERS: SLIMBUS: initial overclocking

    April 4, 2014: ElementalX-m8-0.1
    -Add fsync disable option
    -Add pronto wlan driver
    -Add sweep2sleep
    -usb: gadget: mass_storage: added sysfs entry for cdrom to LUNs
    -ARM CPU Topology and cpu_power driver
    -allow moc-crypto modules to load
    -Add SIO and FIOPS i/o schedulers
    -Add /dev/frandom support
    -Initial Commit: HTC Source g278eae8
    Update on the modifications to motion launch gestures:

    The news is good, lots of options are coming for wake gestures, and they don't cause battery drain.

    You'll be able to choose from stock motion launch gestures, motion launch gestures that work without moving the phone, and traditional s2w/dt2w. Should have pocket detection as well.

    I still have lots of work to do to make everything work seamlessly.

    Should be ready sometime this week.

    -better compatibility of custom gestures with Dot View Case. Let me know if there are still issues.
    -updates to proximity and motion sensor code from GPE 4.4.3 kernel
    -stereo call recording support
    -security updates
    -faster boot time
    -custom Venom Tweaks options. Many kernel options can now be set in Venom Tweaks if you are using the latest ViperOneM8.


    -lz4 compression
    -stereo call recording support
    -security updates
    -various tweaks and optimizations
    -custom Venom Tweaks support
    -wake gestures: compatibility with Dot View Case
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone