[KERNEL][OPX][CM13/14.1]CrazySuperKernel v2.0[02-01-17]

[CrazyGamerGR]

FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3

DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!

Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)

Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)

Toolchain:
DF 4.9 Toolchain [latest update]

CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- state notifier

IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo

TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood

GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm

Thermal control:
- Intelli thermal v2

Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)

Sound:
- Faux sound updated and fixed
- Slimbus overclock

More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- cpu voltage control
- pvs level info
- Kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes

Download Link CrazySuperKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=140902
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961

Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!

Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me

XDA:DevDB Information
CrazySuperKernel, Kernel for the OnePlus X

Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-opx

Kernel Special Features: check the feature list

Version Information
Status: Stable

Created 2017-01-01
Last Updated 2017-01-01

 

[CrazyGamerGR]

FAQ
Recommended app : CrazySuperKernel Adiutor

changelogs

v1.0/01-01-17
- initial release

v2.0/02-01-17
- added fast charge
- added pvs info
- added cpu voltage control

 

[CrazyGamerGR]

If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.

[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.

Zzmove profiles

1 ) Default -> will set governor defaults

2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!

3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving

4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!

5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!

6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!

7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online

8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving

9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!

10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay

 

[CrazyGamerGR]

reserve1

 

[CrazyGamerGR]

reserve2

 

[cokesucker]

Many thanks. It didn't work for me on sultans ROM stuck on one plus screen.

 

[CrazyGamerGR]

Many thanks. It didn't work for me on sultans ROM stuck on one plus screen.

Try m8 if you want the v0.1 where i upload now,it should work

 

[cokesucker]

Try m8 if you want the v0.1 where i upload now,it should work

Sorry bro, i just realized it's for CM14 and I'm running sultans CM13 my mistake didn't read properly.

 

[CrazyGamerGR]

Sorry bro, i just realized it's for CM14 and I'm running sultans CM13 my mistake didn't read properly.

It should work with cm13 too coz cm14.1 got some improvments only

 

[cokesucker]

It should work with cm13 too coz cm14.1 got some improvments only

Cool, downloading 0.1 now, will report back. Thanx for quick response.

 

[CrazyGamerGR]

Cool, downloading 0.1 now, will report back. Thanx for quick response.

Np m8,thx for feedback

 

[Fap4k]

Many thanks. It didn't work for me on sultans ROM stuck on one plus screen.

Read sultan's thread carefully..you will find that sultan's cm doesn't support custom kernels..only Arsenic works with that kernel.but if you are using sultan's cm why you need another kernel..just flash cm 13 and flash this kernel or whatever you like.

 

[CrazyGamerGR]

Read sultan's thread carefully..you will find that sultan's cm doesn't support custom kernels..only Arsenic works with that kernel.but if you are using sultan's cm why you need another kernel..just flash cm 13 and flash this kernel or whatever you like.

Yeh sultan use his own tweaks inside and is better stay with stock but other kernels work coz i used sultan's rom on my oneplus3 with other kernel.

 

[cokesucker]

Read sultan's thread carefully..you will find that sultan's cm doesn't support custom kernels..only Arsenic works with that kernel.but if you are using sultan's cm why you need another kernel..just flash cm 13 and flash this kernel or whatever you like.

Well first of all this isn't Sultan ROM's thread, and there is nothing wrong with trying out new kernels if they are compatible.. the dev was kind enough to upload a version which works.

 

[allard1992]

I'm on CM14.1 with Boeffla kernel. But it lags to much in my opinion. Animations, games all has some stutter. I can install a fresh cm14.1 with this kernel. But is this a lagfree experience for the OPX?

 

[CrazyGamerGR]

I'm on CM14.1 with Boeffla kernel. But it lags to much in my opinion. Animations, games all has some stutter. I can install a fresh cm14.1 with this kernel. But is this a lagfree experience for the OPX?

Need to test it m8 and check if you like the performance of it.

 

[CrazyGamerGR]

New update is up!

 

[LolHacker17]

i trying to flash it on RR NOUGAT but stuck with 1+ logo

 

[CrazyGamerGR]

i trying to flash it on RR NOUGAT but stuck with 1+ logo

V2.0 or v1.0?

 

[LolHacker17]

V2.0 or v1.0?

0.2