• If you are experiencing issues logging in, we moved to a new and more secure software and older account passwords were not able to be migrated. We recommend trying to reset your password, then contacting us if there are issues.
  • Nearly done! Migration cleanup is mostly done. There are a small number of issues left that we continue to work on, but all the heavy lifting is done. We still would love to hear feedback over at this thread and also check out the new XDA app! Thanks and we hope you enjoy the new forums, and thanks for your support of XDA <3

[KERNEL][otus][3.4.109][SaberMod][25/11/15]BELIVEKERNEL - R09 - THE BEST PERFORMANCE

Krizthian

Senior Member
Sep 22, 2013
315
1,601
0
Portovelo

BeliveKernel is a fully optimized kernel, with commits that will make the operation of your device something amazing, is compiled with SaberMod 4.7 which will give you a unique experience, with many more optimizations, constantly being updated on Github, performance is unique, with optimizations change your phone. BeliveKernel will offer many improvements on your phone, from better battery management to better manage processes. Thanks to BeliveKernel you will have the opportunity to give your device one more than incredible life. Enjoy BeliveKernel on your device.

Krizthian not liable for damage or loss of your device. Any claims will not be accepted.​
ONLY FOR CUSTOM ROMS, DON'T FLASH IN STOCK.​

THE PERFORMANCE ON BELIVEKERNEL:

BeliveKernel performance was well done as you can see in the capture AnTuTu score, which you can see that the performance achieved almost equal to that of a Motorola Moto G 2013, almost reaching the 18,000 points. Therefore in performance issues BeliveKernel was made for you, BeliveKernel also has Intelliplug of @ faux123 integrated, which helps to better management of the CPU. other than BeliveKernel it incorporates optimizations as Graphite and is compiled with SaberMod 4.7.

-Features:

-Builded with SaberMod GCC 4.7.
-SELinux it's in PERMISSIVE.
-CRC check it's disabled.
-Kernel version it's 3.4.109(With the last Linux patches).
-Reclaimed RAM from Loggers.
-WiFi it's FULLY WORKING IN ALL ROMS.
-Pipe flag it's ENABLED.
-Lower Swappiness.
-Slub OPTIMIZED.
-Apply_Slack it's OPTIMIZED.
-Added optimized ARM RWSEM algorithm.
-Clock vote it's updated for improved performance.
-Lionheart governor.
-Smartmax governor.
-Wheatley governor - Removed in RELEASE 08.
-Xperience governor.
-Intelliactive governor - Removed in RELEASE 08.
-Conservative governor it's enabled.
-user_policy min/max is exported.
-Ext4 optimized.
-FEAT_PERCPU clockevent flag it's added.
-Battery check interval is increased from 5 to 15 seconds.
-Ratelimit is useles in irq.
-increased bdi_min_ratio to 5.
-add_random it's disabled.
-Optimized Sfck Compression.
-Optimized AES & SHA1 routines.
-Powersuspend it's added.
-Support for more ramdisks.
-Reclaimed virtual memory from each subsystem.
-Improve tweaks for responsiveness on CFS.
-GRAPHITE - MORE PERFORMANCE
-Optimize for size it's ENABLED.
-Kernel compressed with XZ.
-Added a Simple GPU Algorithm.
-Introduce tweaks for network.
-Cleaned up some dead code.
-Added API to allow limiting of min and max cpu frequencies.
-Lowered latency in VM to reduce lags.
-Optimized square root algorithm.
-Added a field to store names for private anonymous memory.
-Optimized memory allocation in check_partition().
-Disabled GFSleepers for ui performance.
-Deadline I/O tweaked for better performance on android.
-Allow zero ms latency in deadline.
-SIO I/O Scheduler - Removed in RELEASE 08.
-Disabled kernel-side mpdecision.
-Added fsync on/off support.
-Enabled fsync by default.
-Added missing return if fsync is disabled from userspace.
-Merged tweak tunables.
-Improved performance for FIOPS I/O.
-Improved tweaks for interactive governor.
-More faster Wakelock.
-Increased readahead to 1024kb.
-Improved tweaks from menuconfig.
-Intelliplug 3.7.
-Improved frandom support.
-Don't call writeback_set_ratelimit().
-Fix writeback cache thrashing.
-Speedup /proc/net/unix.
-Fix occasional slow sync(1).
-Fix race that cause writeback hung.
-Removed compressed copy from zram in-memory.
-Added performance boost option for Intelliplug.
-Added perf_boost sysfs entry and clean up permissions for Intelliplug.
-Enabled CONFIG_KERNEL_MODE_NEON.
-Introduced FastCharge..
-Enable ARCH_POWER.
-Added support for read_iter and write_iter for Ext4.
-Optimize defaults for KSM.
-Fixed dirty_balance_reserve.
-Sync on thread migration optimizations.
-Added hotplug enable toggle.
-Send events one packet at a time.
-Asynchronous I/O latency to a solid-state disk greatly increased.
-Optimize build_sched_domains().
-Lags are reduced absoluty!

-Screenshots:







-Changelogs:

-RELEASE 01:
-Initial Release(With all features mentioned previously).

-RELEASE 02:
-Lionheart governor added.
-Smartmax governor added.
-Optimized AES & SHA1 routines.
-Improve performance on Ext4.
-Powersuspend added.
-Optimize Sfck Compression.
-Disable add_random.
-Increase bdi_min_ratio to 5.
-irq: ratelimit is useless.
-Increase battery check interval from 5 to 15 seconds.
-Add FEAT_PERCPU clockevent flag .
-Export user_policy min/max.

-RELEASE 03:
-Add support for more ramdisks.
-Reclaimed virtual memory from each subsystem.
-Improve tweaks for responsiveness on CFS.
-INCLUDE GRAPHITE - MORE PERFORMANCE
-Enable optimize for size.

-RELEASE 04:
-Kernel compressed with XZ.
-Added a Simple GPU Algorithm.
-Introduce tweaks for network.
-Cleaned up some dead code.
-Added API to allow limiting of min and max cpu frequencies.

-RELEASE 05:
-Lowered latency in VM to reduce lags.
-Optimized square root algorithm.
-Added a field to store names for private anonymous memory.
-Optimized memory allocation in check_partition().
-Disabled GFSleepers for ui performance.
-Deadline I/O tweaked for better performance on android.
-Allow zero ms latency in deadline.
-Added Wheatley governor.
-NOW THE KERNEL IT'S BUILDED WITH SABERMOD 4.7.

-RELEASE 06:
-SIO I/O Scheduler.
-Disabled kernel-side mpdecision.
-Added fsync on/off support.
-Enabled fsync by default.
-Added missing return if fsync is disabled from userspace.
-Merged tweak tunables.
-Improved performance for FIOPS I/O.
-Improved tweaks for interactive governor.
-More faster Wakelock.
-Increased readahead to 256kb.

-RELEASE 07:
-Change numbers in FIOPS I/O Scheduler.
-Improved tweaks from menuconfig.
-Added Intelliplug 3.7.
-Readahead increased to 1024Kb and 32kb.
-Improved frandom support.
-Introduced Xperience governor by @TeamMex
-Introduced IntelliActive governor.
-Reduced swappiness from 45 to 40.
-Don't call writeback_set_ratelimit().
-Fix writeback cache thrashing.
-Speedup /proc/net/unix.
-Fix occasional slow sync(1).
-Fix race that cause writeback hung.
-Removed compressed copy from zram in-memory.

-RELEASE 08:
-Patched to 3.4.109.
-Added performance boost option for Intelliplug.
-Added perf_boost sysfs entry and clean up permissions for Intelliplug.
-Removed Wheatley Governor.
-Removed SIO I/O.
-Enable CONFIG_KERNEL_MODE_NEON.
-Introduce FastCharge.
-Enable ARCH_POWER.
-Removed IntelliActive Governor
-Added support for read_iter and write_iter for Ext4.
-Optimize defaults for KSM.
-Fixed dirty_balance_reserve.
-Sync on thread migration optimizations.
-Added hotplug enable toggle.
-Send events one packet at a time.
-Asynchronous I/O latency to a solid-state disk greatly increased.
-Optimize build_sched_domains().

-RELEASE 09:
-Reduced swappiness to 30.
-Reduced lags (Really, i love this change).
-Optimized Sfck Compression.

-Downloads:

BeliveKernel FOLDER - Download the most recent release ;).

-How to install:

-Boot in TWRP Recovery.
-Flash the ZIP(without wipes).
-Reboot your phone.
-Enjoy BeliveKernel :D.

-Issues:

-In OctOS ROM the autorotation doesn't work :(.

-Sources:

-BeliveKernel.
-CM Kernel by @squid2
-Optimus Kernel by @Flashhhh.
-UltraKernel by Anderson Alvarez.
-FrancoKernel by Francisco Franco.
-DonkeyKang Kernel by Fermasia.
-SrFarias Kernel by Eric Farias.
-Pink Kernel by Pinkflozd.

-Thanks to:

-Flashhhh(FOR THE BEST COMMITS) THANKS! THANKS! THANKS!
-squid2(FOR THE CM KERNEL)
-Motorola(FOR THE SOURCES)
-SrFarias.
-Anderson Alvarez.
-NV-Dev.
-YoshiShaPow.
-Faux123.

ENJOY BELIVEKERNEL ;)

XDA:DevDB Information
BeliveKernel - Belive in the POWER, KERNEL for the Moto E 2015 3G(otus)

Contributors
Krizthian, Flashhhh
ROM Kernel: Linux 3.4.x

Version Information
Status: Stable

Created 2015-08-16
Last Updated 2015-08-16
 
Last edited:

Krizthian

Senior Member
Sep 22, 2013
315
1,601
0
Portovelo
BeliveKernel R02 - RELEASED!.

Changes:

-Lionheart governor added.
-Smartmax governor added.
-Optimized AES & SHA1 routines.
-Improve performance on Ext4.
-Powersuspend added.
-Optimize Sfck Compression.
-Disable add_random.
-Increase bdi_min_ratio to 5.
-irq: ratelimit is useless.
-Increase battery check interval from 5 to 15 seconds.
-Add FEAT_PERCPU clockevent flag .
-Export user_policy min/max.

You can download the new release HERE.

Greetings and Enjoy the POWER.
 
  • Like
Reactions: TechnoAnder

Krizthian

Senior Member
Sep 22, 2013
315
1,601
0
Portovelo
BeliveKernel RELEASE 03 - RELEASED!

Changes:
-Add support for more ramdisks.
-Reclaimed virtual memory from each subsystem.
-Improve tweaks for responsiveness on CFS.
-INCLUDE GRAPHITE - MORE PERFORMANCE
-Enable optimize for size.

You can download the new release HERE.

Greetings and Enjoy the POWER.
 
  • Like
Reactions: magdeoz and Arkanic

Krizthian

Senior Member
Sep 22, 2013
315
1,601
0
Portovelo
BeliveKernel RELEASE 04 - RELEASED!

Changes:
-Kernel compressed with XZ.
-Added a Simple GPU Algorithm.
-Introduce tweaks for network.
-Cleaned up some dead code.
-Added API to allow limiting of min and max cpu frequencies.

You can download the new release HERE.

Greetings and Enjoy the POWER.
 

squid2

Recognized Developer
Mar 9, 2015
1,722
10,969
0
Ontario
WLAN Driver Size

Hello Krizthian,

Great work on the kernel! One thing I've noticed is that your pronto WLAN kernel module is huge (40 MB). This is caused by debugging symbols being present in the driver. You can shrink it by adding the following step to your build process:
Code:
make -j10 modules_install INSTALL_MOD_PATH=your_directory_of_choice INSTALL_MOD_STRIP=1
This will place a stripped kernel module inside the directory you choose. Using the stripped kernel module will greatly reduce the size of the module (to less than 1/10th). You can take a look at my standalone kernel build script here: https://github.com/sultanqasim/android_kernel_motorola_otus/blob/flashable_cm-12.1/build_cwm_zip.sh

Cheers!
 

Krizthian

Senior Member
Sep 22, 2013
315
1,601
0
Portovelo
Hello Krizthian,

Great work on the kernel! One thing I've noticed is that your pronto WLAN kernel module is huge (40 MB). This is caused by debugging symbols being present in the driver. You can shrink it by adding the following step to your build process:
Code:
make -j10 modules_install INSTALL_MOD_PATH=your_directory_of_choice INSTALL_MOD_STRIP=1
This will place a stripped kernel module inside the directory you choose. Using the stripped kernel module will greatly reduce the size of the module (to less than 1/10th). You can take a look at my standalone kernel build script here: https://github.com/sultanqasim/android_kernel_motorola_otus/blob/flashable_cm-12.1/build_cwm_zip.sh

Cheers!
Thanks @squid2 try to apply this in some future release.

Greetings.
 

Krizthian

Senior Member
Sep 22, 2013
315
1,601
0
Portovelo
BeliveKernel RELEASE 05 - RELEASED!

-Lowered latency in VM to reduce lags.
-Optimized square root algorithm.
-Added a field to store names for private anonymous memory.
-Optimized memory allocation in check_partition().
-Disabled GFSleepers for ui performance.
-Deadline I/O tweaked for better performance on android.
-Allow zero ms latency in deadline.
-Added Wheatley governor.
-NOW THE KERNEL IT'S BUILDED WITH SABERMOD 4.7.

You can download the new release HERE.

Greetings and Enjoy the POWER.
 
  • Like
Reactions: Arkanic