[KERNEL] Overclocked kernel v1.5.2

[Uchiha_GT]

I just checked what to said and it turns out you may be incorrect. I tuned down the cpu for test purposes and then went in to system tuner pro. When I checked the reading it said that both cpu 0 and cpu 1 were running at the speed I set on setcpu...,

Sent from my HTC Sensation Z710e using xda premium

 

[zedrix53]

why is there no thermald.conf in /system/etc when i flash this in viper 1.6.1 but when i flash powerful kernel reset by axetelin
and flash sebesatian kernel it now show thermald.conf

 

[Sultanxda]

why is there no thermald.conf in /system/etc when i flash this in viper 1.6.1 but when i flash powerful kernel reset by axetelin
and flash sebesatian kernel it now show thermald.conf

The Powerful Kernel Reset added that file. It also added files called mpdecision and thermald in the /system/etc folder.

 

[zandgreen]

HTC Amaze 4G

I would like to use this opportunity and thank Sebastian for this great piece of work. It's hit!

Can anyone tell me if it is possible to use this kernel on HTC Amaze 4G with Vipers ported rom?

 

[Stephen]

I would like to use this opportunity and thank Sebastian for this great piece of work. It's hit!

Can anyone tell me if it is possible to use this kernel on HTC Amaze 4G with Vipers ported rom?

Unless the kernel has been built for the 4G no it wont they use different drives etc.

 

[zedrix53]

can i edit the thermald.conf from root explorer using text editor?

 

[rzr86]

can i edit the thermald.conf from root explorer using text editor?

probably you can otherwise use notepad++ to edit

 

[nostradamus81]

Cannot install the This kernel

Edit:
Solved by installing a insecure kernel found on this article: http://forum.xda-developers.com/showthread.php?t=1556620

When I try to install this kernel from clockworkmod recover it fails to install.
i am running version 5.0.2.0 of clockwork mod I use this version a while for flashing custom roms and nandroid etc,

the following log has been created by clockworkmod:

-- Installing: /sdcard/Overclocked_kernel_v1.5.2_by_SebastianFM.zip
Finding update package...
I:Update location: /sdcard/Overclocked_kernel_v1.5.2_by_SebastianFM.zip
Opening update package...
Installing update...
Copying files...minzip: Extracted file "/tmp/dump_image"
minzip: Extracted file "/tmp/mkbootimg"
minzip: Extracted file "/tmp/mkbootimg.sh"
minzip: Extracted file "/tmp/unpackbootimg"

minzip: Extracted file "/tmp/zImage"
Dumping boot image...about to run program [/tmp/dump_image] with 3 args

about to run program [/tmp/unpackbootimg] with 3 args
Updating kernel in boot image...
run_program: child terminated by signal 9
about to run program [/tmp/mkbootimg.sh] with 1 args
error: could not load ramdisk '/tmp/boot.img-ramdisk.gz'
run_program: child exited with status 1
Flashing boot image...script aborted: assert failed: write_raw_image("/tmp/newboot.img", "boot")

assert failed: write_raw_image("/tmp/newboot.img", "boot")
E:Error in /sdcard/Overclocked_kernel_v1.5.2_by_SebastianFM.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/Overclocked_kernel_v1.5.2_by_SebastianFM.zip")

Can someone please help with this issue?
Thanks in advance

 

[rzr86]

Edit:
Solved by installing a insecure kernel found on this article: http://forum.xda-developers.com/showthread.php?t=1556620

When I try to install this kernel from clockworkmod recover it fails to install.
i am running version 5.0.2.0 of clockwork mod I use this version a while for flashing custom roms and nandroid etc,

the following log has been created by clockworkmod:

-- Installing: /sdcard/Overclocked_kernel_v1.5.2_by_SebastianFM.zip
Finding update package...
I:Update location: /sdcard/Overclocked_kernel_v1.5.2_by_SebastianFM.zip
Opening update package...
Installing update...
Copying files...minzip: Extracted file "/tmp/dump_image"
minzip: Extracted file "/tmp/mkbootimg"
minzip: Extracted file "/tmp/mkbootimg.sh"
minzip: Extracted file "/tmp/unpackbootimg"

minzip: Extracted file "/tmp/zImage"
Dumping boot image...about to run program [/tmp/dump_image] with 3 args

about to run program [/tmp/unpackbootimg] with 3 args
Updating kernel in boot image...
run_program: child terminated by signal 9
about to run program [/tmp/mkbootimg.sh] with 1 args
error: could not load ramdisk '/tmp/boot.img-ramdisk.gz'
run_program: child exited with status 1
Flashing boot image...script aborted: assert failed: write_raw_image("/tmp/newboot.img", "boot")

assert failed: write_raw_image("/tmp/newboot.img", "boot")
E:Error in /sdcard/Overclocked_kernel_v1.5.2_by_SebastianFM.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/Overclocked_kernel_v1.5.2_by_SebastianFM.zip")

Can someone please help with this issue?
Thanks in advance

actually the insecure kernel.zip didn't flash successfully
you have the same error again
first flash 4ext recovery.it is better
then flash the insecure kernel.zip
and then flash sebastianFM kernel

 

[ziaulh.ch]

By fa, this is the best kernel hat suited VIPER S 1.6+! Never felt any better with the phone! Its super fast and benchmarkings are good! At 1836 MHz the phone reboots...tried seveal times. But at 1.7 it superb with -37.5 UV!(This is rare to work with 1.7 mhz) CPU temps are fantastic! No overheat or anything!

One thing I didnt understand! My phone is better i terms of performance and batt with performance gov rather than ondemand! Ondemand pushes both CPU on most of th times but performance gov only activates core 1 when core 2 is at highest freq!

Thanks for this lovely kernel again!

 

[rzr86]

At 1836 MHz the phone reboots...tried seveal times. But at 1.7 it superb with -37.5 UV

you can try 1836mhz with -11%UV
i have no reboots when benchmarking

 

[mandeep294]

Ondemand pushes both CPU on most of th times but performance gov only activates core 1 when core 2 is at highest freq!

Thanks for this lovely kernel again!

Didnt get wat u r saying? Performance always pushes core0 at highest freq and its d mp decision which forces core1 online when load reaches threshold. Isnt it true?
And battery lyf must be a lot less mostly when u use phone for messenging browsing..

"No ur battery usage screenshots wont help anyone"

 

[ziaulh.ch]

Didnt get wat u r saying? Performance always pushes core0 at highest freq and its d mp decision which forces core1 online when load reaches threshold. Isnt it true?
And battery lyf must be a lot less mostly when u use phone for messenging browsing..

"No ur battery usage screenshots wont help anyone"

Ya, you are right! I was wondering about that! But then I found that kernel tuner added some script init.d which messed up! Now corrected if and on ondemand.

 

[Iceberger]

By fa, this is the best kernel hat suited VIPER S 1.6+! Never felt any better with the phone! Its super fast and benchmarkings are good! At 1836 MHz the phone reboots...tried seveal times. But at 1.7 it superb with -37.5 UV!(This is rare to work with 1.7 mhz) CPU temps are fantastic! No overheat or anything!

One thing I didnt understand! My phone is better i terms of performance and batt with performance gov rather than ondemand! Ondemand pushes both CPU on most of th times but performance gov only activates core 1 when core 2 is at highest freq!

Thanks for this lovely kernel again!

The only thing preventing me from using this kernel is that sweep2wake not supported.
Still have hopes that Seb will add it to his kernel one day

 

[ataf]

This is the only kernel working lagfree
Don't know why someone using it not because of features instead of usability.

In my opinion noone need sweep to unlock in real.

 

[Iceberger]

This is the only kernel working lagfree
Don't know why someone using it not because of features instead of usability.

In my opinion noone need sweep to unlock in real.

Not the only one
Check my signature.

Sent from my Sensation XE using xda premium

 

[Thermaltake868]

Is it normal that just going like 5 minutes trough menu fast clicking on options and all that can drown you battery from 8 to 10%, becouse my battery is doing that, don't know if it's the bettery, or just this kernel with that mod for it that I have I set both core to 1566Mhz and GPU to 266 and lower the mV from 1150 to 1125mV @ 1566Mhz

 

[Koenhen]

I tried most available kernels on ViperS ROM and I keep coming back to Sebastian's. It is 100% stable and fast. Thanks to the developer for this creation :thumbup:

send from HTC Sensation XE on ViperS 1.6.2 ROM and Seb 1.5.2 kernel, 32gb class10, Anker batt. using Tapatalk

 

[illegal2008]

Can you add to kernel xpad.ko module,for xbox 360 controller support?

 

[SlideR270295]

Someone tried sebastian kernel on jelly bean ?