Development [Kernel][Overclocked] No Gravity [2023-01-22][ProtonClang]

Search This thread

Pierre2324

Recognized Developer
Oct 25, 2015
2,021
2,865
24
Canada
Moto G
OnePlus 2
NoGravityKernel

K8EYuPK.jpg


FKkAugz.jpg

No Gravity Kernel 1.0.0 + 4.3 App Trailer

Hey, NoGravity Kernel dev coming from the good old Pocophone F1 here! I've graduated with a bachelor degree in computer science and I actually work as a C# programmer. I've worked on OnePlus 2, Pocophone F1 and Mi 8 already, first one is discontinued but I still give updates for the 2 others. Welp, I've lost my F1 which is the reason I'm here, on this slightly newer kernel 4.9=>4.14. NGK's mindset is Performance/smoothness while getting decent battery life due to added battery oriented features.

(Scroll down for Telegram Group link where I'll be most of the time)

For those who want a to know more about my work here is the link to NoGravity Kernel for OnePlus 2 & to NoGravity Kernel for Pocophone F1 / Mi 8.

iaHQ9D3.jpg

The Kernel will boot using Balance Profile when Magisk is present. Other profiles for battery, performance and gaming can be switched to in my app.

ApF0jYF.jpg

To tweak the kernel easily, here's my No Gravity app! featuring custom profiles (Battery, Balanced, Performance and Gaming & Gaming+). My app offers some device specific features that can't be found in other kernel tweaking apps. You can find them lower in the thread.)

3f8hs78.jpg

-No Gravity app! support
-Android 13 support
-Compiled with Proton Clang + O3 + Polly + LTO optimizations
-NGK Thermal locking mechanism*
-Thermal driver optimizations
-F2FS & UFS optimizations (Rapid GC / UFS Boost / Samsung Write boost)
-2133MHz DDR Bus
-GPU UC/OC : 192MHz / 692MHz
-GMU OC to 500MHz
-CPU Input boost driver instead of CPU boost
-Enabled WALT, disabled PELT
-Using Big and Prime clusters for specific performance critical events
-Devfreq boosting for various events like app opening
-Touchscreen drivers optimizations
-Updated Touchscreen firmware
-Both 12.5.5 & 13.0.3 Touch FW are present and can be changed from NGK App
-Optional Sultan's PID shrink
-250Hz kernel interrupt rate
-Disabled ZRAM by default
-LZ4 ZRAM compression algorithm
-Exposed vibrator strength
-DTS Eagle software driver
-Boeffla Wakelock Blocker v1.1.0
-Sound Control
-Kcal
-High Brightness Mode
-Content Adaptive Backlight Control
-Dmming
-USB Fast Charging
-Added Powersaving flags to panel
-AdrenoBoost
-Various GPU & libs optimizations
-VDSO for better 32 bit performance
-sdFAT v2.4.5
-Added ZEN I/O Scheduler & used by default
-Added SQRT freq selection algo to schedutil
-Added BBR and WESTWOOD TCP Congestion protocols
-Using Westwood as default with FQ_Codel for better bandwidth use
-Removed many debugging stuffs
-Merged in latest CAF Tags
-Always upstreamed to latest (4.14.303)
-And many more under the hood changes & optimizations

xCkEUzV.jpg


-Monet theme adapting to your ROMs colors dynamically
-Injected sepolicies to work on Enforcing SELinux
-Kernel & App update checker (Direct install of kernel and app)
-Balance(Default),Performance,Battery,Gaming & Gaming+ Profiles (QSTile available)
-Custom Profile Creator Page that let's you create and share profiles with the NGK community (/SDCARD/NGK/PROFILES/)
-Precise CPU temperature for each Clusters separately
-Per-App Tweaks Page to load tweaks for specific apps
-CPU Page with following tunables:
-CPU Governor
-CPU Frequency Selection Algorithm (Linear/Exponential)
-CPU Min/Max Frequencies
-Input boost
-NGK Smart Throttling
-NGK Stats Page showing last gaming session FPS+ Chart, throttling, battery drain, avg CPU temps & avg Battery temps, toggle for enabling NGK Stats Overlay displaying FPS and following optional features:
-CPU Temps/Freqs
-GPU Temps/Freqs
-Battery Temps/Percentage
-RAM usage
-Kernel Page to let you control:
-App optimization (ART) Button
-Thermals:
NoGravity (NGK’s default) || Battery || Stock one
-Sultan PID read optimizations
-ZRAM
-GPU Page:
-GPU Stats
-Min/Max GPU Freq Selector
-High Brightness Mode
-Content Adaptive Backlight Control
-Adrenoboost
-Touchscreen firmware selector
-Proximity Gestures Switch to pulse ambient dispay on Hand Wave
-Pick-Up Gesture Switch to pulse ambient display when device is taken
-Pixel 3 Flip to Shhh feature
-DTS Eagle (Sound) Info Page
-More will be added...


fmrRVKR.jpg

-More features...
-Let me know what you want and those may be added!

pmhT9VH.jpg

This kernel should work on any ROM & MIUI!

v0BMu0X.jpg

-I recommend before coming to conclusion, give it at least 2 complete charge cycles and then raise any issue.
- I recommend to use my app, franco app or EX Kernel Manager if you need to tweak the kernel further

LBRCN7g.jpg

-Flash No_Gravity_Kernel-vX.X.zip file in TWRP (Latest TWRP Recovery Recommanded)
-(Optional) - Clear cache and Dalvik => if you do so, Use App Optimization button in NGK App to regenerate ART or let device charge at idle at 100% for some time (that's when android runs optimizations).







Download No gravity Kernel / Download No Gravity App

Donate me! / Telegram Group /
No Gravity App Changelog / No Gravity Kernel Changelog


0tAsweM.jpg

-The android community and to all my testers for using my kernel and your precious feedbacks and ideas!.




Contributors
Pierre2324
Source: https://github.com/Pierre2324/NGK_android_kernel_xiaomi_sm8150
Version Information
Status:
Stable
Current Version: 3.2.0
Created: 2021-09-02
Last Updated: 2023-01-22
 

Attachments

  • Screenshot_20210828-093651.png
    Screenshot_20210828-093651.png
    310.3 KB · Views: 3,104
  • Screenshot_20210902-205749.png
    Screenshot_20210902-205749.png
    151.4 KB · Views: 3,508
  • Screenshot_20210831-211703.png
    Screenshot_20210831-211703.png
    160.6 KB · Views: 3,478
  • Screenshot_20210827-124420.png
    Screenshot_20210827-124420.png
    56.2 KB · Views: 3,690
Last edited:

Pierre2324

Recognized Developer
Oct 25, 2015
2,021
2,865
24
Canada
Moto G
OnePlus 2
Changelog
NoGravity Kernel v3.2.0 + App 6.2.0
qKpoiAu.jpg


Previous Changelogs:

NoGravity Kernel v3.1.0 + App 6.1.0
pocG9fh.png


NoGravity Kernel v3.0.1 Hotfix
YYiF9c9.png



NoGravity Kernel v3.0.0 + App v6.0.0

PLCi7nV.jpg


NoGravity Kernel v2.2.1 + App v5.2.1
c849Ar7.png


NoGravity Kernel v2.2.0 + App v5.2.0
8dHllLu.png


NoGravity Kernel v2.1.0 + App v5.1.0
kIHtMlH.png


NoGravity Kernel v2.0.0 + App v5.0.0
Note: Custom Profile Creator page added
BYGHptM.png


NoGravity Kernel v1.0.0
xOvCwxe.png


NoGravity Kernel App v4.3.0
B4dGV9y.png

 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    NGK community just hit 5k members on Telegram 🙏 Also happy to let you know that I received Recognized Developer tag on XDA with NGK expanding to F2/F3/F4/Mi10T lately.

    Thanks everyone ✨

    A good journey, from OnePlus 2 to Xiaomi phones (F1/Mi 8) and now Xiaomi (Kona) devices (F2/F3/F4/Mi10T) 🎉

    That being said, not forcing anyone to do so but if you would like to support my work and help NGK get features / updates / fixes faster, you can help me get a Kona device from here :

    Crowdfunding
    or from paypal directly :
    Paypal

    Thanks to everyone who already did, that's appreciated 🙏
    3
    Updates are out! Thread & changelog post updated. 🫡 + Hotfix for the quick ones who had the time to update before.

    Changelog attached and in post#2.

    Kernel hotfix for freezing issue on libperfmgr Powerhal rom
    App hotfix for kernel page issue some users were facing.

    If you had the app (kernel page) issue, it means your cache partition was read only. If you want your cache to be read-write, just format it. If not, no problem app will work fine anyway now.
    1
    Updates are out! Thread & changelog post updated. 🫡 + Hotfix for the quick ones who had the time to update before.

    Changelog attached and in post#2.

    Kernel hotfix for freezing issue on libperfmgr Powerhal rom
    App hotfix for kernel page issue some users were facing.
    HI and thanks for your work 👍
    1
    Updates are out! Thread & changelog post updated. 🫡 + Hotfix for the quick ones who had the time to update before.

    Changelog attached and in post#2.

    Kernel hotfix for freezing issue on libperfmgr Powerhal rom
    App hotfix for kernel page issue some users were facing.

    If you had the app (kernel page) issue, it means your cache partition was read only. If you want your cache to be read-write, just format it. If not, no problem app will work fine anyway now.
    Congratulations on the work, it is sensational! Why is the kernel name "unavailable" on Miui?
    1
    Congratulations on the work, it is sensational! Why is the kernel name "unavailable" on Miui?
    Glad you like it. Your answer is in your question, Miui is the reason. (Dont mind it, that just miui being miui and not showing "long" kernel names)
  • 33
    NoGravityKernel

    K8EYuPK.jpg


    FKkAugz.jpg

    No Gravity Kernel 1.0.0 + 4.3 App Trailer

    Hey, NoGravity Kernel dev coming from the good old Pocophone F1 here! I've graduated with a bachelor degree in computer science and I actually work as a C# programmer. I've worked on OnePlus 2, Pocophone F1 and Mi 8 already, first one is discontinued but I still give updates for the 2 others. Welp, I've lost my F1 which is the reason I'm here, on this slightly newer kernel 4.9=>4.14. NGK's mindset is Performance/smoothness while getting decent battery life due to added battery oriented features.

    (Scroll down for Telegram Group link where I'll be most of the time)

    For those who want a to know more about my work here is the link to NoGravity Kernel for OnePlus 2 & to NoGravity Kernel for Pocophone F1 / Mi 8.

    iaHQ9D3.jpg

    The Kernel will boot using Balance Profile when Magisk is present. Other profiles for battery, performance and gaming can be switched to in my app.

    ApF0jYF.jpg

    To tweak the kernel easily, here's my No Gravity app! featuring custom profiles (Battery, Balanced, Performance and Gaming & Gaming+). My app offers some device specific features that can't be found in other kernel tweaking apps. You can find them lower in the thread.)

    3f8hs78.jpg

    -No Gravity app! support
    -Android 13 support
    -Compiled with Proton Clang + O3 + Polly + LTO optimizations
    -NGK Thermal locking mechanism*
    -Thermal driver optimizations
    -F2FS & UFS optimizations (Rapid GC / UFS Boost / Samsung Write boost)
    -2133MHz DDR Bus
    -GPU UC/OC : 192MHz / 692MHz
    -GMU OC to 500MHz
    -CPU Input boost driver instead of CPU boost
    -Enabled WALT, disabled PELT
    -Using Big and Prime clusters for specific performance critical events
    -Devfreq boosting for various events like app opening
    -Touchscreen drivers optimizations
    -Updated Touchscreen firmware
    -Both 12.5.5 & 13.0.3 Touch FW are present and can be changed from NGK App
    -Optional Sultan's PID shrink
    -250Hz kernel interrupt rate
    -Disabled ZRAM by default
    -LZ4 ZRAM compression algorithm
    -Exposed vibrator strength
    -DTS Eagle software driver
    -Boeffla Wakelock Blocker v1.1.0
    -Sound Control
    -Kcal
    -High Brightness Mode
    -Content Adaptive Backlight Control
    -Dmming
    -USB Fast Charging
    -Added Powersaving flags to panel
    -AdrenoBoost
    -Various GPU & libs optimizations
    -VDSO for better 32 bit performance
    -sdFAT v2.4.5
    -Added ZEN I/O Scheduler & used by default
    -Added SQRT freq selection algo to schedutil
    -Added BBR and WESTWOOD TCP Congestion protocols
    -Using Westwood as default with FQ_Codel for better bandwidth use
    -Removed many debugging stuffs
    -Merged in latest CAF Tags
    -Always upstreamed to latest (4.14.303)
    -And many more under the hood changes & optimizations

    xCkEUzV.jpg


    -Monet theme adapting to your ROMs colors dynamically
    -Injected sepolicies to work on Enforcing SELinux
    -Kernel & App update checker (Direct install of kernel and app)
    -Balance(Default),Performance,Battery,Gaming & Gaming+ Profiles (QSTile available)
    -Custom Profile Creator Page that let's you create and share profiles with the NGK community (/SDCARD/NGK/PROFILES/)
    -Precise CPU temperature for each Clusters separately
    -Per-App Tweaks Page to load tweaks for specific apps
    -CPU Page with following tunables:
    -CPU Governor
    -CPU Frequency Selection Algorithm (Linear/Exponential)
    -CPU Min/Max Frequencies
    -Input boost
    -NGK Smart Throttling
    -NGK Stats Page showing last gaming session FPS+ Chart, throttling, battery drain, avg CPU temps & avg Battery temps, toggle for enabling NGK Stats Overlay displaying FPS and following optional features:
    -CPU Temps/Freqs
    -GPU Temps/Freqs
    -Battery Temps/Percentage
    -RAM usage
    -Kernel Page to let you control:
    -App optimization (ART) Button
    -Thermals:
    NoGravity (NGK’s default) || Battery || Stock one
    -Sultan PID read optimizations
    -ZRAM
    -GPU Page:
    -GPU Stats
    -Min/Max GPU Freq Selector
    -High Brightness Mode
    -Content Adaptive Backlight Control
    -Adrenoboost
    -Touchscreen firmware selector
    -Proximity Gestures Switch to pulse ambient dispay on Hand Wave
    -Pick-Up Gesture Switch to pulse ambient display when device is taken
    -Pixel 3 Flip to Shhh feature
    -DTS Eagle (Sound) Info Page
    -More will be added...


    fmrRVKR.jpg

    -More features...
    -Let me know what you want and those may be added!

    pmhT9VH.jpg

    This kernel should work on any ROM & MIUI!

    v0BMu0X.jpg

    -I recommend before coming to conclusion, give it at least 2 complete charge cycles and then raise any issue.
    - I recommend to use my app, franco app or EX Kernel Manager if you need to tweak the kernel further

    LBRCN7g.jpg

    -Flash No_Gravity_Kernel-vX.X.zip file in TWRP (Latest TWRP Recovery Recommanded)
    -(Optional) - Clear cache and Dalvik => if you do so, Use App Optimization button in NGK App to regenerate ART or let device charge at idle at 100% for some time (that's when android runs optimizations).







    Download No gravity Kernel / Download No Gravity App

    Donate me! / Telegram Group /
    No Gravity App Changelog / No Gravity Kernel Changelog


    0tAsweM.jpg

    -The android community and to all my testers for using my kernel and your precious feedbacks and ideas!.




    Contributors
    Pierre2324
    Source: https://github.com/Pierre2324/NGK_android_kernel_xiaomi_sm8150
    Version Information
    Status:
    Stable
    Current Version: 3.2.0
    Created: 2021-09-02
    Last Updated: 2023-01-22
    8
    Changelog
    NoGravity Kernel v3.2.0 + App 6.2.0
    qKpoiAu.jpg


    Previous Changelogs:

    NoGravity Kernel v3.1.0 + App 6.1.0
    pocG9fh.png


    NoGravity Kernel v3.0.1 Hotfix
    YYiF9c9.png



    NoGravity Kernel v3.0.0 + App v6.0.0

    PLCi7nV.jpg


    NoGravity Kernel v2.2.1 + App v5.2.1
    c849Ar7.png


    NoGravity Kernel v2.2.0 + App v5.2.0
    8dHllLu.png


    NoGravity Kernel v2.1.0 + App v5.1.0
    kIHtMlH.png


    NoGravity Kernel v2.0.0 + App v5.0.0
    Note: Custom Profile Creator page added
    BYGHptM.png


    NoGravity Kernel v1.0.0
    xOvCwxe.png


    NoGravity Kernel App v4.3.0
    B4dGV9y.png

    5
    Updates are out!

    NGK App 5.2
    NGK 2.2

    Featuring :
    -Per-App Tweaks Page
    -Dynamic Monet Theme + App Icon
    -And more...

    Full Changelog in the screenshots below.
    Thread and changelog posts updated.

    Just a quick reminder as I'm spending a lot of time on NGK,
    if you want to support my work and keep me motivated:
    https://www.paypal.me/pierre2324

    I wish yall a good time / easter 🐣, stay safe!
    4
    For thise who aren't following progress on Telegram, X3Pro kernel faced the same issue than F1/Mi 8. So in addition to fixing boot for A13, upstreams had to be fixed to be able to still be on latest linux version 4.14.xxx. This took time and multiple test builds, but I just wanted to let yall know that X3 Pro kernel finally booted fully upstreamed 4.14.295.

    Now thats kernels are fixed, on to the NGK App.
    4
    Good news for #X3Pro gang 🤙🏾 A13 issue fixed. Now on to the upstream issues.

    Thanks to @mahinh611 for helping me out listing the A13 working kernels and to @neobuddy89 for the fix.

    Screenshot_20220916-143015.png