Development [Kernel][Overclocked] No Gravity [2023-08-28][ProtonClang]

[Luigi_2]

I have heat on Arrows as well.

 

[Pierre2324]

For everyone who think they are having temperature issues just set stock thernals in ngk app or battery (from kernel page).

A guy on MIUI was getting temp warning playing genshin, going stock thermal profile removed the warning.

 

[van_]

NoGravityKernel

No Gravity Kernel 1.0.0 + 4.3 App Trailer

Hey, NoGravity Kernel dev coming from the good old Pocophone F1 here! I've graduated with a bachelor degree in computer science and I actually work as a C# programmer. I've worked on OnePlus 2, Pocophone F1 and Mi 8 already, first one is discontinued but I still give updates for the 2 others. Welp, I've lost my F1 which is the reason I'm here, on this slightly newer kernel 4.9=>4.14. NGK's mindset is Performance/smoothness while getting decent battery life due to added battery oriented features.

(Scroll down for Telegram Group link where I'll be most of the time)

For those who want a to know more about my work here is the link to NoGravity Kernel for OnePlus 2 & to NoGravity Kernel for Pocophone F1 / Mi 8.

The Kernel will boot using Balance Profile when Magisk is present. Other profiles for battery, performance and gaming can be switched to in my app.

To tweak the kernel easily, here's my No Gravity app! featuring custom profiles (Battery, Balanced, Performance and Gaming & Gaming+). My app offers some device specific features that can't be found in other kernel tweaking apps. You can find them lower in the thread.)

-No Gravity app! support
-Compiled with Proton Clang + O3 + Polly + LTO optimizations
-NGK Thermal locking mechanism*
-Thermal driver optimizations
-F2FS & UFS optimizations (Rapid GC / UFS Boost / Samsung Write boost)
-2133MHz DDR Bus
-GPU UC/OC : 192MHz / 692MHz
-CPU Input boost driver instead of CPU boost
-Enabled WALT, disabled PELT
-Using Big and Prime clusters for specific performance critical events
-Devfreq boosting for various events like app opening
-Touchscreen drivers optimizations
-Updated Touchscreen firmware
-Optional Sultan's PID shrink
-250Hz kernel interrupt rate
-Disabled ZRAM by default
-Exposed vibrator strength
-DTS Eagle software driver
-Boeffla Wakelock Blocker v1.1.0
-Sound Control
-USB Fast Charging
-Added Powersaving flags to panel
-AdrenoBoost
-Various GPU & libs optimizations
-VDSO for better 32 bit performance
-sdFAT v2.4.5
-Added ZEN I/O Scheduler & used by default
-Added SQRT freq selection algo to schedutil
-Added BBR and WESTWOOD TCP Congestion protocols
-Using Westwood as default with FQ_Codel for better bandwidth use
-Removed many debugging stuffs
-Merged in latest CAF Tags
-Always upstreamed to latest (4.14.245)
-And many more under the hood changes & optimizations

-Injected sepolicies to work on Enforcing SELinux
-Kernel & App update checker (Direct install of kernel and app)
-Balance(Default),Performance,Battery,Gaming & Gaming+ Profiles (QSTile available)
-Custom Profile Creator Page that let's you create and share profiles with the NGK community (/SDCARD/NGK/PROFILES/)
-Precise CPU temperature for each Clusters separately
-CPU Page with following tunables:
-CPU Governor
-CPU Frequency Selection Algorithm (Linear/Exponential)
-CPU Min/Max Frequencies
-Input boost
-NGK Stats Page showing last gaming session FPS+ Chart, battery drain, avg CPU temps & avg Battery temps, toggle for enabling NGK Stats Overlay displaying FPS and following optional features:
-CPU Temps/Freqs
-GPU Temps/Freqs
-Battery Temps/Percentage
-RAM usage
-Kernel Page to let you control:
-App optimization (ART) Button
-Thermals:
NoGravity (NGK’s default) || Battery || Stock one
-Sultan PID read optimizations
-GPU Page:
-GPU Stats
-Max GPU Freq Selector
-KLapse (Brightness and Daytime modes)
-Backlight Dimmer
-HDR ON/OFF toggle
-Adrenoboost
-Proximity Gestures Switch to pulse ambient dispay on Hand Wave
-Pick-Up Gesture Switch to pulse ambient display when device is taken
-Pixel 3 Flip to Shhh feature
-DTS Eagle (Sound) Info Page
-More will be added...

-More features...
-Let me know what you want and those may be added!

This kernel should work on any ROM & MIUI!

-I recommend before coming to conclusion, give it at least 2 complete charge cycles and then raise any issue.
- I recommend to use my app, franco app or EX Kernel Manager if you need to tweak the kernel further

-Flash No_Gravity_Kernel-vX.X.zip file in TWRP (Latest TWRP Recovery Recommanded)
-(Optional) - Clear cache and Dalvik => if you do so, Use App Optimization button in NGK App to regenerate ART or let device charge at idle at 100% for some time (that's when android runs optimizations).







Download No gravity Kernel / Download No Gravity App
Donate me! / Telegram Group /
No Gravity App Changelog / No Gravity Kernel Changelog

-The android community and to all my testers for using my kernel and your precious feedbacks and ideas!.

​

Contributors
Pierre2324
Source: https://github.com/Pierre2324/NGK_android_kernel_xiaomi_sm2150
Version Information
Status: Stable
Current Version: 1.0.0
Created: 2021-09-02
Last Updated: 2021-09-02

hello i am getting an error 1 in twrp and it said that my device is not supported/compatible with this kernel. i have poco x3 pro with havoc os installed on it. weirdly enough, i have arrow kernel (?) installed, i don't know why, btw the last custom rom i have installed before havoc os is arrow os. please help.

 

[van_]

hello i am getting an error 1 in twrp and it said that my device is not supported/compatible with this kernel. i have poco x3 pro with havoc os installed on it. weirdly enough, i have arrow kernel (?) installed, i don't know why, btw the last custom rom i have installed before havoc os is arrow os. please help.

jeez, my bad, i downloaded the zip file that is have no "X3PRO" in it, i successfully flashed it now

 

[Pierre2324]

hello i am getting an error 1 in twrp and it said that my device is not supported/compatible with this kernel. i have poco x3 pro with havoc os installed on it. weirdly enough, i have arrow kernel (?) installed, i don't know why, btw the last custom rom i have installed before havoc os is arrow os. please help.

Yea you flashed wrong zip, btw dont reply to OP

 

[RedMatterGG]

Top notch kernel and app

 

[Pierre2324]

Top notch kernel and app

Glad u like it mate

 

[van_]

i am very sorry, i'm new (noob) at this field. and i promise that i will never again reply to the OP's post

 

[Maitai_Banana]

Been running NGK plus Havoc OS for about a week now. No issues whatsoever and the performance and battery life is amazing. Hats off to Pierre

 

[Pierre2324]

Been running NGK plus Havoc OS for about a week now. No issues whatsoever and the performance and battery life is amazing. Hats off to Pierre

Glad u like it

 

[sintaxcz]

Hello i have a temp issue . Im on miui Stock 12.5.2 Global (Europe) + TWRP-3.5.2-vayu-Nebrassy-2 and magisk 23.
On balanced i have this temps and clocks when doing absolutly nothing (on 60hz refresh)
When i browsing web + download something CPU temp goes up to 92C and battery up to 48 And i think thats not good.
Could anyone advise me what could be wrong and what I should do about it ? Thank you very much

 

[Pierre2324]

View attachment 5422055
Hello i have a temp issue . Im on miui Stock 12.5.2 Global (Europe) + TWRP-3.5.2-vayu-Nebrassy-2 and magisk 23.
On balanced i have this temps and clocks when doing absolutly nothing (on 60hz refresh)
When i browsing web + download something CPU temp goes up to 92C and battery up to 48 And i think thats not good.
Could anyone advise me what could be wrong and what I should do about it ? Thank you very much

See if setting battery thermal profile in ngk app fixes that. But there must be something spamming in your logs making the device use high frequencies for no reasons.

 

[sintaxcz]

See if setting battery thermal profile in ngk app fixes that. But there must be something spamming in your logs making the device use high frequencies for no reasons.

No change on thermal profiles all 3 have same high frequencies issue only nogravity adds MIUI thermal warning . I flashed twrp trough fastboot And in twrp flashed magisk and kernel nothing more. I read the instructions on the forum and I watched the YouTube video just to be sure and followed everything correctly so I don't know why this is happening.
I can operate on normal temps only when i set CPU governor on PowerSafe but thats is exactly the opposite of why I flash this kernell.

 

[TioCareca]

@Pierre2324 glad to see your work here, i came from poco f1 and i loved your kernel, will try it on my PX3P too...

 

[Pierre2324]

No change on thermal profiles all 3 have same high frequencies issue only nogravity adds MIUI thermal warning . I flashed twrp trough fastboot And in twrp flashed magisk and kernel nothing more. I read the instructions on the forum and I watched the YouTube video just to be sure and followed everything correctly so I don't know why this is happening.
I can operate on normal temps only when i set CPU governor on PowerSafe but thats is exactly the opposite of why I flash this kernell.

Yea as I said, you there must be something spamming in logs. Thats a thing for some people on MIUI. Doesn't happen on AOSP.

 

[Merowa]

Someone knows if is it compatible with ParanoidOS for Poco X3 Pro?
And the overclock comes with undervolt? Or i need to do manually at NGK APP/Konabess?

 

[Pierre2324]

Someone knows if is it compatible with ParanoidOS for Poco X3 Pro?
And the overclock comes with undervolt? Or i need to do manually at NGK APP/Konabess?

Works with any ROM. Non MIUI still recommended. Kernel is undervolted, no need to tweak it further.

 

[sintaxcz]

Ditched MIUI and switched to ArrowOS And now everything looks good ! On balanced doing nothing i have CPU 34 C and battery 26 C thats i think Is right No overheating message so far .

 

[TioCareca]

Ditched MIUI and switched to ArrowOS And now everything looks good ! On balanced doing nothing i have CPU 34 C and battery 26 C thats i think Is right No overheating message so far .

yep, good values

 

[Pierre2324]

Ditched MIUI and switched to ArrowOS And now everything looks good ! On balanced doing nothing i have CPU 34 C and battery 26 C thats i think Is right No overheating message so far .

Yup im on arrow also. You wont get any overheating message on any AOSP ROM.