Development [Kernel][Overclocked] No Gravity [2023-08-28][ProtonClang]

[yukinoshita]

it doesn't work when i try flash NoGravityKernal2.0.0.zip my phone poco x3 pro(6gb/128gb) gives me the message "ERROR installing zip file" I am using derpfest latest version android 12 and twrp version 3.6.0_11-0 even though I charged my phone to 100% please help?

 

[yukinoshita]

it doesn't work when i try flash NoGravityKernal2.0.0.zip my phone poco x3 pro(6gb/128gb) gives me the message "ERROR installing zip file" I am using derpfest latest version android 12 and twrp version 3.6.0_11-0 even though I charged my phone to 100% please help?

Nvm. I just did it with sideload I don't know why it gives me an error when installing..

 

[witdeep]

pls fix charge power 13.5w to 33w

 

[juergen46]

Since I installed the kernel for my Poco X Pro 2 days ago, the Proxymity, Gyroscope and Accelerometer sensors no longer work. They can also no longer be calibrated. I was on AorroOS and am now back to Mui 12.5, but the sensors can no longer be calibrated in the original firmware either. What could be the reason?? Please help me

 

[Usama-CW]

Since I installed the kernel for my Poco X Pro 2 days ago, the Proxymity, Gyroscope and Accelerometer sensors no longer work. They can also no longer be calibrated. I was on AorroOS and am now back to Mui 12.5, but the sensors can no longer be calibrated in the original firmware either. What could be the reason?? Please help me

was thinking about installing any kernel, but finally i got my answer. Imma stay on lineage kernel.

 

[ohno1052]

Hello. Suddenly I've installed this kernel and enabled boot animation. After a reboot, screen became black, phone acted to everything as normal(connected to bluetooth headphones, vibrated on the notification, played sound, when I unlocked it), but screen was just black(everything was good until ngk boot animation!). Ok, I've rebooted to twrp, flashed my rom, magisk and kernel again, but ngk boot animation not disappeared. So, how to get rid of it without losing data?

 

[irmas5]

Hello. Suddenly I've installed this kernel and enabled boot animation. After a reboot, screen became black, phone acted to everything as normal(connected to bluetooth headphones, vibrated on the notification, played sound, when I unlocked it), but screen was just black(everything was good until ngk boot animation!). Ok, I've rebooted to twrp, flashed my rom, magisk and kernel again, but ngk boot animation not disappeared. So, how to get rid of it without losing data?

try flash another kernel

 

[Pierre2324]

Thanks for you effort on this kernel but this kernel scored lowest on AnTuTu or any bench app I tested on and on PUBG can't even maintain 90fps and my fast charging is not working anymore so I had to go back stock
I wouldn't recommend this kernel

I hope you didnt set something like gaming+ profile thinking its the best profile for benchmarks and gaming. Fast charging has been mentionned many times already here. Its fixed for next update. But thats fine your choice to go on any kernel your like best.

 

[Pierre2324]

Hello. Suddenly I've installed this kernel and enabled boot animation. After a reboot, screen became black, phone acted to everything as normal(connected to bluetooth headphones, vibrated on the notification, played sound, when I unlocked it), but screen was just black(everything was good until ngk boot animation!). Ok, I've rebooted to twrp, flashed my rom, magisk and kernel again, but ngk boot animation not disappeared. So, how to get rid of it without losing data?

Remove ngk magisk module and it will boot up fine. It also happened to me not sure why, something must have changed in roms.

 

[KProject]

First of all. I love this kernel.
Just one thing that scares me "GPU overcloked" it is really safe?
And I can't disable OC (no 675MHz in GPU setting)
If you can add/create AROMA Installer for non OC version, it will be great.
Overall. This very good battery + performance kernel! Thanks for your hard work!

Note:
For anyone with MIUI, don't ask dev ABC about MIUI.
This kernel is OPTIMIZED for AOSP with MIUI COMPATIBILITY.
So. Any problem in MIUI is normal, since this kernel NOT OPTIMIZED for MIUI.

 

[Pierre2324]

First of all. I love this kernel.
Just one thing that scares me "GPU overcloked" it is really safe?
And I can't disable OC (no 675MHz in GPU setting)
If you can add/create AROMA Installer for non OC version, it will be great.
Overall. This very good battery + performance kernel! Thanks for your hard work!

Note:
For anyone with MIUI, don't ask dev ABC about MIUI.
This kernel is OPTIMIZED for AOSP with MIUI COMPATIBILITY.
So. Any problem in MIUI is normal, since this kernel NOT OPTIMIZED for MIUI.

1. Glad you like it.
2. No dont be scared about gpu oc.
-GPU isnt even overclocked by default
-GPU uses lower voltage than stock kernel (less drain, less heat, less stress on gpu)
-nah aroma installer is useless, its not oc by default if you want oc manually oc it from ngk app.
3. Welp you are right about MIUI. This kernel is based on CAF and selectively picked some MIUI stuffs to make sure it works, but kernel will of course be best on AOSP. AOSP is also what I use. It will work on MIUI but how well will depend on MIUI version.

 

[Pierre2324]

pls fix charge power 13.5w to 33w

Its fixed for 2.1

 

[Pierre2324]

Since I installed the kernel for my Poco X Pro 2 days ago, the Proxymity, Gyroscope and Accelerometer sensors no longer work. They can also no longer be calibrated. I was on AorroOS and am now back to Mui 12.5, but the sensors can no longer be calibrated in the original firmware either. What could be the reason?? Please help me

Not kernel related. Try restoring persist

 

[Pierre2324]

was thinking about installing any kernel, but finally i got my answer. Imma stay on lineage kernel.

Welp not kernel related but ok

 

[niccoss]

hello, this kernel work with stock rom xiaomi.eu v12 5.7.0.RJUMIXM v12-11.. if Yes what i need to download



[X3PRO][11-12]NoGravityKernel_2.0.0
or
[X3PRO][12]NoGravityKernel_2.0.0

and question, with this kernel i can disable example 2 cores and set clock under 2000mhz on all cores? fo better battery ?

Thanks

 

[Pierre2324]

hello, this kernel work with stock rom xiaomi.eu v12 5.7.0.RJUMIXM v12-11.. if Yes what i need to download



[X3PRO][11-12]NoGravityKernel_2.0.0
or
[X3PRO][12]NoGravityKernel_2.0.0

and question, with this kernel i can disable example 2 cores and set clock under 2000mhz on all cores? fo better battery ?

Thanks

Yea can be flashed on miui.
Hmm if there are two files 2.0.0 then they are the same exact files.
You can, but shouldnt disable cores. Disabling core isnt a thing since 4.9 linux kernel when EAS became a non-pixel-exclusive thing. You can use ngk app and set battery profile if you want or tweak freqs as you wish manually, but disabling cores wont do much except kill performance, make the device slow. Device prefer doing task quickly to go back to idle/low freqs than taking more time to do tasks at lower cpu freqs.

 

[irmas5]

hello, this kernel work with stock rom xiaomi.eu v12 5.7.0.RJUMIXM v12-11.. if Yes what i need to download



[X3PRO][11-12]NoGravityKernel_2.0.0
or
[X3PRO][12]NoGravityKernel_2.0.0

and question, with this kernel i can disable example 2 cores and set clock under 2000mhz on all cores? fo better battery ?

Thanks

I think there are zip file, and apk. ngk kernel zip, and ngk app.

 

[Pierre2324]

hello, this kernel work with stock rom xiaomi.eu v12 5.7.0.RJUMIXM v12-11.. if Yes what i need to download



[X3PRO][11-12]NoGravityKernel_2.0.0
or
[X3PRO][12]NoGravityKernel_2.0.0

and question, with this kernel i can disable example 2 cores and set clock under 2000mhz on all cores? fo better battery ?

Thanks

Checked to make sure but There is only one 2.0 version, the other is 1.0

 

[niccoss]

thanks for answer for now kernel is installed now i must check how to setup for not lost too much performance and get better battery

 

[niccoss]

one thing is missing in the kernel it will be fun if you add it. underclock ..
The performance cluster can be downgraded to 300mhz
prime cluster could also be able to lower the power to 300mhz.
if someone does not play and he wants the battery to last a long time, he could lower the clock speed.

second thing i remember some kernl on samsung (hulk kernel)
there was a very nice option there. ability to disable cores.
there are probably a lot of people who do not need so many processor cores. the ability to disable 4 cores will be a very good addition.
android 12 with miui will be smooth with 4 cores without any problems


sorry for second post i forgot to edit my prev ;/