[Kernel][PELT][EAS]Nameless Kernel[4.4.213][R31][z2_row]

[francojfc9]

What is the difference between [4.4-EAS] and [4.4] in R24?
[4.4] comes without eas or what?

Comes with HMP same as 3.xx kernel and works on aex 6.1 without problems.

 

[Izelop]

Hi guys, help me find a shell / driver to manage this kernel.

 

[Izelop]

R24
Change log:
- Rebase on 4.4.169 with latest caf tags
- Remove all unnecessary changes and upstreams
- Performance seems better than last build
- Fix booting on z2 pro

R20.1
Change log:
- Upstream to 4.4.163
- Build with LiuNian clang 8
- See github for more

R20:
Change log:
- Linux version 4.4.162
- Works on 4.4 compatible ROM only (ROMs with 4.4 kernel build in)

R19:
Change log:
-Upstream to 3.18.124
-Latest caf tags merged in
-HZ=300
-Improve stability on high load
-See more on github

R18
Change log:
-Upstream to 3.18.120
-Latest caf tags merged in
-Upstreamed some drivers
-Double click wake up enable by default(Works on P)
-Add support for hugepage but disabled by default
-Add support for ksm but disabled by default
*If your ROM is build with lineage trees in zuk-devs,hugepage will be enabled if your device have 6GB RAM and KSM will be enabled if your device have 3GB RAM.
-You can see gpu go 100mHz when theres no load this time
-Current information update every 5s
-See github for more changes
*If you are on Pie ROM with volte working.Flash R18[Volte] build or you ll lose volte after rebooting.

R17
Change log:
-Upstream to 3.18.115
-Include a safetynet patch (need test)
-Added an interface to adjust cpu max freq after screen off(in interactive gov)
-Interface to turn on/off cpu input boost
-Dynamic fsync included
-Gpu min freq now down to 180mHz
-Wireguard included
-Latest caf tag merged
-Latest qcacld driver merged
-Performance improve

R16
Change log:
-Build with DragonTC
-Performance improve
-Upstream to 3.18.110
-Latest source merged
-Faster boot-up speed(than last build lol)
-Back to use 2.15+1.59 as default

R15
Change log:
-Revert something that can cause unstable
-Undervolt for less heat(May cause panic on some device when benching, use voltage control to raise voltage if u meet that)
-Some upstreams

R14
Change log:
-Upstream to 3.18.108
-A lot of hotplugs included(Not recommend enable it on our kryo but u can have a try)
-Intellithermal removed because seems that it doesnt work.
-Use another sound control driver those problem may fixed

R13:
Change log:
-Merge latest caf tag
-Use more proper freq table
-Use more proper values for Gpu
-Check if supported before flashing
-Use stock voltage for cpu to fix panic on some device when benching

R12
Change log:
-Upstream to 3.18.107
-Now cpus will not boost to OC freqs when device is booting and I lock it to a lower freq so there will less heat when booting but a bit slower than last version.So OC is quite safe now,cpu OC only when u select an OC freq,u can use this kernel as a non-OC kernel now Lol.
-Fix panic when booting on some bad devices.
-Big cluster OC 2.53 GHz now(Really unstable,I can only stay seconds on it with raising voltage to 1.25v (using voltage control).Hope some lucky guys could have a bench on it Lol.
!!!And do not use this freq for daily use!!!)
-Little cluster 1.86GHz added.
-“Performance” gov have got no performance now(because of those things before so lock min freq to max if u want to use something like performance gov)


R11
Change log:
-Undervolt a bit
-Upstream to 3.18.106
-Latest source merged
-USB fast charge added

R10.5
Change log:
-Fix voltage problem cause by a oversight
-Really less heat on this build because a ****ing problem is fixed Lol

R10
Change log:
-Fix audio on z2 pro
-Switch to GCC 7
-Underclock 1.8+1.3 as default
-Voltage control added
-Intellithermal added
-Fsync control added
-Sound control works

R9
Change log:
-Fix boot problem on aex0416 build
#Old tree with /factory mounting as /vendor is not supported now#

R8
Change log:
-Darkness added
-maple added
-New thermal conf added with less heat
-LMK back to stock

Nameless Kernel R7
Change log:
-Fix lagging cause by LMK
-Upstream to 3.18.105
-ElementalX added
-Zen I/O gov added
-A lot of network I/O gov enabled (westwood default)
-Set gpu 624mhz as default
-Raise voltage for little cluster 1996mhz and gpu 780mhz,it should be more stable now.

Nameless Kernel R6.5
-Not really a new build
Change log:
-Fix performance on AEX5.4.
Try this if u feel performance on aex5.4 is a ****

Nameless Kernel R6.1
for z2 pro only
-Sound fixed(A lot of thanks to @mracar)

Nameless Kernel R6
for z2 plus and z2 pro
change log:
-Sound control added
-GPU now OC 780mHz
-GPU minimal frequency up to 214 mHz so it will be more smooth (Like recent UI)
-Added 1689 mHz for little cluster
-Lower voltage for non-OC frequencies for less heat
-Raise voltage for OC frequencies for stable
-Merge latest source for z2 pro from cosmedd's repo so sound problem should be fixed.

help me find a shell / driver to manage this kernel

 

[Hahatulk]

http://prntscr.com/m9b0qm (image attaching doesnt work)
After flashing kernel i get this message. Is it bad or what? Happens when flashing kernel on 6.2 AEX. (Clean installed rom)

 

[ikram.senguen]

http://prntscr.com/m9b0qm (image attaching doesnt work)
After flashing kernel i get this message. Is it bad or what? Happens when flashing kernel on 6.2 AEX. (Clean installed rom)

Ignore it

 

[DenverPL]

I have a problem with hernel panic. Had it before so I installed stock. Worked without kernel panic for few months but I hate stock rom so decided to go once again with RR and Nameless Kernel 19.
Today my phone didn't wake me up because of kernel panic (blue LED and phone off)...
What should I do?

 

[ikram.senguen]

Woha latest 25 with latest aex feels so right for now, thank you!!!

 

[Hahatulk]

Woha latest 25eas with latest aex feels so right for now, thank you!!!

Uve just installed it, how can you say that?

Sent from my ZUK Z2121 using Tapatalk

 

[dikon]

No sound for notifications. Sound settings crashing. Back to stock for now.

 

[Hahatulk]

Please add support for iptables, my internet can't be shared without this support

(On screenshot is f1xy kernel ip_tables_target)

 

[Oriwen]

Hi, thanks for your work, unfortunatelly as dikon wrote sound configuration crashes and kernel is unstable in general (hard crash and UI restart which never happened with AEX stock kernel). Main cause for instability may be OCed CPU and graphics.

 

[ikram.senguen]

Uve just installed it, how can you say that?

Installed and heavyused it, thats how i now something is intendet goood and yeah still using it without problems, i also did Not got These problems below but anyway, i wanna thank you Mr. Dev xzr467706992 <3

 

[satmaster]

No problems with sound configuration, or stability here..last AEX 6.2

 

[Hahatulk]

deleted

 

[ikram.senguen]

[FAZIT:EAS]
° vanced magisk YouTube does not really Open, and Others Apps Take tooo damn long
[FAZIT:HMP]
° no speaker sound either

 

[francojfc9]

Hi, i have no speaker sound with Nameless R25 hmp, i'm on aex 6.2.

 

[Hahatulk]

When disconnecting otg connected device this message gets stuck in notifications

Sent from my ZUK Z2121 using Tapatalk

 

[Nabuccoo]

When disconnecting otg connected device this message gets stuck in notifications

Same here, but it is not a new thing for me. I am on 6.1.

 

[Hahatulk]

everything crashes, system freezes till reboot, phone randomly reboots. This cant be used. Please repair R25, it is unusable at all.

 

[stealthmopped]

Sorry