[Kernel][PELT][EAS]Nameless Kernel[4.4.213][R31][z2_row]

[ikram.senguen]

Don't know if it's illegal or bothersome or dangerous ;¶ but the best experience i encountered was :

big cluster + 2,15ghz with Darkness governor with togled power saving option in same CPU section @KernelAdiutor, and little cluster +1,59ghz with ElementalX governor and deactivated all touch boost settings

-together-

with Gpu 624mhz and i/o zen with 1048kb with swappiness to 0 and zram to 0

I could try to explain why I like this:

-Darkness gives nice performance
-ElementalX has moderate but good responsiveness & has built-in touch-boost behaviors
-I/O zen always nice and zram was never nesesary
-stock frequencies can handle everything with this setup

 

[ikram.senguen]

:highfive:

 

[Oriwen]

Dafuq? How do you cool it?

 

[ikram.senguen]

Dafuq? How do you cool it?

I really didn't this time and even run bench two times in a row

---------- Post added at 01:41 PM ---------- Previous post was at 01:36 PM ----------

I really didn't this time and even run bench two times in a row

Untouched profile since result, using latest RR 6.1 by the way, replaced thermal_config in system/etc with the one from vendor/etc and deleted the one in vendor of course.

 

[ikram.senguen]

I really didn't this time and even run bench two times in a row

---------- Post added at 01:41 PM ---------- Previous post was at 01:36 PM ----------


Untouched profile since result, using latest RR 6.1 by the way, replaced thermal_config in system/etc with the one from vendor/etc and deleted the one in vendor of course.

∆

 

[Terminator.J]

:highfive:

So how did you change the colors on your nav bar buttons?

 

[meDAem]

Hi @xzr467706992, can you add SafetyNet Patch by sultanxda?

 

[xzr467706992]

Hi @xzr467706992, can you add SafetyNet Patch by sultanxda?

Added

 

[meDAem]

Added

Thanks, when will be new update?

 

[ZeroSen]

-resolved-

 

[xzr467706992]

Thanks, when will be new update?

umm maybe after release 3.18.115

 

[Alvaro1982]

Someone use with AEX 5.6?
I can't change the maximum freq

 

[Oriwen]

Someone use with AEX 5.6?
I can't change the maximum freq

Working fine here.

 

[Alvaro1982]

Working fine here.

You use kernel adiutor?

 

[AMDFenics]

Someone use with AEX 5.6?
I can't change the maximum freq

All fine too :good::good::good:

 

[ikram.senguen]

! This kernel is based on treble tree,so make sure you are on a treble ROM!

#Build for z2 plus but it should work well on pro#
#Should support treble roms based on DD3's source#

! Some profiles from /vendor will be replaced so if u dont trust me,backup /vendor before flashing!

---------Notice-----------
I can say with certain flashing this kernel is safe at all.Kernel will not go on OC freqs if u dont choose OC freqs by using tools like KA(from R12).So in fact u can use this kernel as a non-OC kernel Lol.

But the kernel has a lot of settings that could cause unstable like high OC freqs (2.53/2.46/780/2.0),so its strongly recommend to test the freq you want to use before you set it for daily use.Just lock min and max freq to it and see if theres kernel panic or crashes.If everything is fine,you can choose it for daily use.Or u can try to raise voltage for it and test again.

For every device:
OC 2.26+1.68+624 is stable

For most device:
OC 2.34+1.76+710 is stable

For some device:
OC 2.41+2.0(1.86)+780 is stable

For little device:
OC 2.5+2.0+780 is stable

So if this kernel is good at performance or battery depends on ur settings.Default settings(1.8+1.3+624) prefer battery + smooth.

!!!!!Above all,DONT PLAY PUBG ON OC FREQS IF U DONT HAVE WATER COOLER!!!!!
!!!!!UNDERCLOCK FOR PUBG OR U CAN HARDLY EAT CHICKEN LOL!!!!!

----------------------------



Feature:
-Big cluster OC 2.5GHz
-Little cluster OC 2GHz
-GPU OC 780mHz
-Intellithermal included
-Modified thermal config included
-Sound control added
-A lot of TCP govs
-Ghostpepper from AKT included(Less heat and better performance)
-Sound control added
-Arch power included
-Fsync control added
-A lot of optimization included
-Touch boost can be switch now(disable by default)
-CPU set 2.15+1.59 as default
-Upstream to 3.18.107
-Background tasks can load on both cpu0 and cpu1


I think you neednt do anything about optimization to this kernel because I have already do my best for it XD


Download here:
https://github.com/xzr467706992/Nameless-Kernel-Release(old)
or
https://www.androidfilehost.com/?w=files&flid=267780(new)

Flash it and reply this thread if ur phone dosent explode(just a joke)(It should be SAFE)





Source:
https://github.com/xzr467706992/android_kernel_zuk_msm8996

Anykernel repo:
https://github.com/xzr467706992/AnyKernel2


Many thanks to:
@mracar (Help me fix audio problem on z2 pro)
@DD3Boh (This kernel is based on his tree)

And thanks everyone works on z2 (pro)

Dear Dev, is there a slight chance getting wireguard built in your kernel?

 

[Ninnix96]

Dear Dev, is there a slight chance getting wireguard built in your kernel?

Don't quote the first post, tag the dev

 

[Ninnix96]

umm maybe after release 3.18.115

HI dear, thanks for your work. Can you add the eas on this kernel? Many rom and kernel for oneplus 3 have this feature and have the same cpu of zuk z2 Pro.

Many info in the link:

https://www.xda-developers.com/google-pixel-fastest-android-phone-eas/

 

[xzr467706992]

HI dear, thanks for your work. Can you add the eas on this kernel? Many rom and kernel for oneplus 3 have this feature and have the same cpu of zuk z2 Pro.

Many info in the link:

https://www.xda-developers.com/google-pixel-fastest-android-phone-eas/

Maybe but need a lot of time to test

 

[Ninnix96]

Maybe but need a lot of time to test

This would be so good, I can help you with test if you need