Yes would be great to have this kernel operating with Stock Android 10... is that a possibility 8224Freak?
I agree. Would love this on A10
Yes would be great to have this kernel operating with Stock Android 10... is that a possibility 8224Freak?
I tried to flash it over LineageOS 17.1 from nearby thread, and it fails to boot, then drops to TWRP. Various attempts with different versions of kernel (TWRP imgs flashed to Boot) plus Magisk - doesn't want to boot. Take backups to save time.
Ended up coming back to default kernel of LineageOS manually extracted from latest release zip.
LOS zip contains "boot.img", I took it out from zip with my version of LOS and flashed it to Boot partition in TWRP (same how this Kernel was flashed).I'm having the same exact issue. How did you extract the default kernel as reflashing LOS didn't work for me either?
LOS zip contains "boot.img", I took it out from zip with my version of LOS and flashed it to Boot partition in TWRP (same how this Kernel was flashed).
After that, Reboot to system should work just fine.
Here's one from build dated 2020-09-21 to save you time/traffic.
https://mega.nz/file/DUUDUKjQ#ayUqcnBQfNQXAhXWlYJ3Qyie0LdSn9rML6uO8un53Ok
Could also try to flash magisk over it. Maybe some root specific conflict. Default LOS boot.img is rootless.I thought that was it and tried it but it didn't work for me. Same issue, just fails to boot fully and goes back to twrp. I may just have to start from scratch and try to restore data.
Could also try to flash magisk over it. Maybe some root specific conflict. Default LOS boot.img is rootless.
On the side note, I'm curious how to identify what went wrong with this current kernel. Is it simply not compatible with LOS 17.1?
My LuisKERNEL (PIE/TEN) for Samsung Galaxy Tab S5e (gts4lvwifi/gts4lvlte)![]()
Code:*** Disclamer /* * Your warranty is now void. * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at us for messing up your device, we will laugh at you. * */
Notice
I like to share my work for my Samsung Galaxy Tab S5e (LTE). I have compiled this kernel so that my Galaxy Tab performs better and rooting with Magisk works better.
I'm testing this kernel on my Samsung Galaxy Tab S5e (gts4lvwifi) device and I think it should work on the Samsung Galaxy Tab S5e LTE (gts4lvlte) too.
The kernel I use on the latest Samsung Stock ROM with Magisk 20.3 and Magisk Manager App + Ex Kernel Manager.
The source code is a fork from the official LineageOS 17.1 sources.
The kernel runs for me with LineageOS and Stock Samsung ROM.
Sometimes I get a lot of help or feature requests from users of my LuisROMs and LuisKERNELs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs. Please understand if I can not always answer directly.
Kernel: I have pached up the Kernel to Linux 4.9.217 with many mods other devs (thanks to @LuK1337 for the base an incredible work!)
- Pached from 4.9.112 up to 4.9.217 from caf
- Removed lots of excessive bloat (improves security and performance)
- Improved stability (several bugs not listed here have been fixed)
- Boeffla Wakelock blocker driver V1.1.0
- More I/O-Schedulers (fiops, sio, zen, maple)
- Added fsync on/off support.
- Disabled crc check
- Optimized for performance and battery life
- Compatible with EX Kernel Manager
- Compatible with systemless root (recommend Magisk 20.x or higher !!!)
- Wireguard kernel support
- Many other misc. improvements not listed here
First time installation:
- Unlock the bootloader, 1. Connect to WiFi network, 2. Enable OEM Unlock in developer options, 3. Turn off the tablet, Boot to download mode manually by plugging in USB and holding all the buttons for few seconds, 4. Follow instructions on the screen
- Connect to WiFi network and make sure OEM Unlock in developer options is still checked
- Flash custom VBMeta image ( http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/vbmeta.tar ) in Odin ( use AP slot )
- After flashing VBMeta, boot to stock. It'll likely ask you to wipe data, if so do that
- Connect to WiFi network and make sure OEM Unlock in developer options is still checked
- Now you can flash TWRP ( gts4lvwifi > https://dl.twrp.me/gts4lvwifi ) or ( gts4lvlte > http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/twrp-3.3.1-0-gts4lvlte.img.tar ) in Odin ( use AP slot once again ), for convenience you can hold volume up while flashing it so that you boot to recovery right after it's flashed
- Boot into TWRP (press power and vol+)
- Install latest LuisKERNEL (.img) LuisKERNEL-4.9.XXX-twrp-2020XXXX.img
- Optional: Install latest Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
- Reboot ( make sure to not install TWRP app when TWRP asks you to )
Update:
- Boot into TWRP (press power and vol+)
- Install latest LuisKERNEL (.img) LuisKERNEL-4.9.XXX-twrp-2020XXXX.img
- Reboot ( make sure to not install TWRP app when TWRP asks you to )
Downlads:
- Link cr LuisROM & LuisKERNEL: http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/
Kernel source:
Enjoy!
Frank
Bro i follow every step from instruction on Android 10 but wifi, usb n few app cant be use.. mind if u tell in detail how to install you kernel on T725 TWRP?
I tried to flash it over LineageOS 17.1 from nearby thread, and it fails to boot, then drops to TWRP. Various attempts with different versions of kernel (TWRP imgs flashed to Boot) plus Magisk - doesn't want to boot. Take backups to save time.
Ended up coming back to default kernel of LineageOS manually extracted from latest release zip.
@8224Freak Any chance to revive your kernel for this tab on Android 10 or even 11? Regards
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Kcal will merged in the next days if stableupdate - Tried the kernel on sm-T720 , worked without issues. No kcal support.
- please consider adding kcal/color/saturation options if possible.
Thanks
I bought a used tab s5e from a local electronics store for less than half of the msrp. I then discovered that it wouldnt charge past 70%. Later I peeled off the sticker on the back and the tablet said 'not for sale'. It turns out that this was a display unit and these are configured to not charge past 70% to protect the battery. I didn't want to return it because it was a really good deal even if it doesn't fully charge. My question is will flashing this kernel allow my tablet to charge to 100%? Or this kernel will not be compatible with it? Thanks in advance.