• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[KERNEL] [R] [S] NetErnels ElectroPerf NetHunter [X00TD]

Search This thread

nail16

Senior Member
Nov 20, 2011
825
302
Mumbai
Using TP LINK tl wn722n v2 on azmpm1. Dot os 5.1 and android 11.
lsusb detects my adapter but not working. Help please.
Same here, for v1 WN722N. ATH9K_HTC drivers not enabled. @grm34 could you please add support for AR9271 chipset in the next release. this is one of the most popular chipset out there.
Screenshot_20210615-182326_Termux.png
Screenshot_20210615-182824_Termux.png
 

nail16

Senior Member
Nov 20, 2011
825
302
Mumbai
checked the OP, it mentions "Atheros HTC based wireless card support" ?
i'm using Linux kali 4.4.271-⚡Neternels-LTO-R-WIFI-v2.3⚡ #3 SMP PREEMPT Fri Jun 11 04:07:13 CEST 2021 aarch64
 

nail16

Senior Member
Nov 20, 2011
825
302
Mumbai
Ok, it's working now, firmware loads correctly. had installed the firmware within the chroot (/lib/firmware) , installed the firmware magisk module, which installs all firmware under /system/etc/firmware. now it works.
 
  • Like
Reactions: grm34

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    ElectroPerf Kernel (CAF) with Kali NetHunter support
    Asus ZenFone Max Pro M1 (X00TD)
    electroperf.png


    FTR: I am not responsible for bricked devices, dead SD cards, thermonuclear war,
    or you getting fired because the alarm app failed. Please do some research if you
    have any concerns about features included in this Kernel before flashing it!
    YOU are choosing to make these modifications, and if you point the finger
    at me for messing up your device, I will laugh at you.

    Features:
    • System V IPC
    • Forced module loading
    • Forced module unloading
    • Module versioning support
    • HCI USB driver
    • Broadcom protocol support
    • Realtek protocol support
    • HCI UART driver
    • HCI BCM203x USB driver
    • HCI BPA10x USB driver
    • HCI BlueFRITZ! USB driver
    • cfg80211 wireless extensions compatibility
    • Generic IEEE 802.11 Networking Stack (mac80211)
    • mac80211 mesh networking (pre-802.11s) support
    • USB RTL8150 based ethernet device support
    • Realtek RTL8152/RTL8153 Based USB Ethernet Adapters
    • USB Modem (CDC ACM) support
    • Generic serial bulk in/out
    • Abstract Control Model (CDC ACM)
    • Object Exchange Model (CDC OBEX)
    • Network Control Model (CDC NCM)
    • Ethernet Control Model (CDC ECM)
    • Ethernet Control Model (CDC ECM) subset
    • Ethernet Emulation Model (EEM)
    • Atheros/Qualcomm devices
    • Linux Community AR9170 802.11n USB support
    • Atheros mobile chipsets support
    • Atheros ath6kl USB support
    • MediaTek MT7601U (USB) support
    • Ralink driver support
    • Ralink rt2500 (USB) support
    • Ralink rt2501/rt73 (USB)
    • Ralink rt27xx/rt28xx/rt30xx (USB)
    • rt2800usb - Include support for rt33xx devices
    • rt2800usb - Include support for rt35xx devices
    • rt2800usb - Include support for rt3573 devices
    • rt2800usb - Include support for rt53xx devices
    • rt2800usb - Include support for rt55xx devices
    • rt2800usb - Include support for unknown (USB)
    • Realtek 8187 and 8187B USB support
    • Realtek rtlwifi family of devices
    • RTL8723AU/RTL8188[CR]U/RTL819[12]CU (mac80211) support
    • Include support for untested Realtek 8xxx USB devices
    • Wireless RNDIS USB support
    • RNDIS USB Gadget
    • RTL8187 Master Mode (AP) ⚠️
    • Enabled all cgroups and namespaces
    • Atheros HTC based wireless card support
    • USB ZD1201 based wireless device support
    • ZyDAS ZD1211/ZD1211B USB-wireless support
    • USB On The GO (USB OTG)
    • OTA Updates from Kernel Manager
    • Linux Stable v4.4.x
    • CAF TAG
    • Qcacld-3.0 drivers
    • FW-API drivers
    • Qca-wifi-host-cmn drivers
    • Wireguard

    Not already supported:
    • Monitoring for internal wireless & bluetooth cards
    • SDR

    > Source Code: Here
    > Download: Here
    > Installation: boot from recovery > wipe cache & dalvik cache > flash kernel.zip
    > OTA Updates: import this kernel configuration in your favorite kernel manager

    2
    the kernel is working fine on android 11 but can we use the deauth tab in nethunter to deauth all except ourself WITHOUT a EXTERNAL WIRELESS CARD?
    No I don't think so on any custom ROM. Seems doable on stock082. Monitor mode can be enabled but any capture request failed on internal wireless card.
    2
    can you make kernel compatible with stock 82 rom as it is not compatible with android 9 on the stock rom!
    I'm not going this way, only Android R and S is supported. For Android Q, roms which are based on LineageOS or Android Q ports like OxygenOS and MIUI only booted. So Pie...

    Android 11 NFC not working. Can you fix ?
    NFC is fixed since v2.2

    BB is pretty fine as original kernel, i'm using the kernel for daily.

    I can use this kernel for daily?
    Sure, daily use here.
    2
    You're welcome. No, I implemented bluetooth drivers few days ago and I did not tried on stock ROM. I will look on this. Like internal wireless card, I think the devices in use by the system are conflicting (could be stuff like kernel power management). On the other hand, if it's some power management conflicts, deactivating it may decrease battery life. Could also be a firmware pb. Kernel working fine with external adapters I tried, and for now I did not notice any disadvantage compared to the original kernel for an all days use.
    yeah the kernel is really good for daily use i m using it since 2 days almost and there was no bugs! do let me know about bluetooth arsenal and updates
    thanks again!
    1
    It's just a fork of ElectroPerf Kernel which I made compatible for Kali NetHunter.
    BB is good like original kernel. Features describes additionals settings added.