Development [KERNEL]Radioactive Kernel v3.0.2[A13 Stable][2023.05.03][UNIFIED PIXEL6/PIXEL6PRO]

[phaino00]

On a different note. I installed this earlier and had a few random reboots. Unfortunately did not get any logs.

To preface, I flashed via EXKM and was using Kiri kernel, so it was a dirty flash. I reflashed Kiri and have had not had any random reboots. I read some people were getting random reboots on Kiri and freak mentioned he may know what is causing it. I did not experience any random reboots running Kiri over the last week or so...

I plan to clean install radioactive over the weekend and I'll update then. (Again, there may have been an issue of residual from Kiri, so take it fwiw)

I share this in case anyone is experiencing random reboots.

Thanks op for keeping this alive on raviole even though you don't have the phone.

 

[jploco]

Las instrucciones para instalar el kernel están en la primera publicación del OP. Debe estar rooteado para instalar, lo que requiere que el gestor de arranque esté desbloqueado. Si no está seguro de lo que significa algo de esto, debe leer sobre cómo rootear y modificar su teléfono. Sólo una sugerencia.

thanks very much , with update of march i can root this phone and unlcok bootloader?

 

[phaino00]

Yes.

 

[jploco]

Las instrucciones para instalar el kernel están en la primera publicación del OP. Debe estar rooteado para instalar, lo que requiere que el gestor de arranque esté desbloqueado. Si no está seguro de lo que significa algo de esto, debe leer sobre cómo rootear y modificar su teléfono. Sólo una sugerencia.

thanks very much

 

[jploco]

Sí.

thanks very much bro

 

[jploco]

Puedo desbloquear fastboot, ahora, ¿puedo instalar solo el apk de magisk para rootear mi pixel 6pro?

pd: puedo ver este video,

¿Es correcto el método para rootear?
Puedo ver en esta página: https://developers.google.com/android/images?hl=es-419
que no puedo descargar la imagen para marzo de 2023, solo veo febrero de 2023.

 

[acuicultor]

On a different note. I installed this earlier and had a few random reboots. Unfortunately did not get any logs.

To preface, I flashed via EXKM and was using Kiri kernel, so it was a dirty flash. I reflashed Kiri and have had not had any random reboots. I read some people were getting random reboots on Kiri and freak mentioned he may know what is causing it. I did not experience any random reboots running Kiri over the last week or so...

I plan to clean install radioactive over the weekend and I'll update then. (Again, there may have been an issue of residual from Kiri, so take it fwiw)

I share this in case anyone is experiencing random reboots.

Thanks op for keeping this alive on raviole even though you don't have the phone.

Thanks for reporting, i've compiled another build that hopefully fixes that reboot issue, are you by any chance up to test it out?? Thanks

 

[phaino00]

Thanks for reporting, i've compiled another build that hopefully fixes that reboot issue, are you by any chance up to test it out?? Thanks

Give me an hour or so, I can do it then if that works.

 

[acuicultor]

Give me an hour or so, I can do it then if that works.

No rush, take your time and thank you for testing it.

 

[acuicultor]

Puedo desbloquear fastboot, ahora, ¿puedo instalar solo el apk de magisk para rootear mi pixel 6pro?

pd: puedo ver este video,

¿Es correcto el método para rootear?
Puedo ver en esta página: https://developers.google.com/android/images?hl=es-419
que no puedo descargar la imagen para marzo de 2023, solo veo febrero de 2023.

Tienes que desbloquear el bootloader para flashear cualquier partición, aquí en xda-developers hay muy buenas guías para hacerlo e incluso para rootear y para descargar la rom de marzo tienes que poner el navegador en inglés para que te aparezca el enlace.
Por otro lado te pido que no continues haciendo estas preguntas aquí ya que este hilo es para discutir sobre el desarrollo del kernel no para responder preguntas que están respondidas cientos de veces en este foro. Un saludo.




English :
You have to unlock the bootloader to flash any partition, here at xda-developers there are very good guides to do it even to root, to download the March rom you have to put the browser in English so that the link appears.
On the other hand, I ask you not to continue asking these questions here since this thread is to discuss kernel development, not to answer questions that have been answered hundreds of times in this forum. All the best.

 

[phaino00]

No rush, take your time and thank you for testing it.

I flashed it about 5 minutes ago. I did flash it over Kiri again. I use the kernel with no specific tweaks.

I'll update in a couple hours. Yesterday, there were about 3 reboots over a ~6 hour period it was installed.

 

[acuicultor]

I flashed it about 5 minutes ago. I did flash it over Kiri again. I use the kernel with no specific tweaks.

I'll update in a couple hours. Yesterday, there were about 3 reboots over a ~6 hour period it was installed.

Thanks, hope this time everything is fine.

 

[jploco]

Tienes que desbloquear el bootloader para flashear cualquier partición, aquí en xda-developers hay muy buenas guías para hacerlo e incluso para rootear y para descargar la rom de marzo tienes que poner el navegador en inglés para que te apareció el enlace.
Por otro lado te pido que no continues haciendo estas preguntas aquí ya que este hilo es para discutir sobre el desarrollo del kernel no para responder preguntas que están respondidas cientos de veces en este foro. Un saludo.




Inglés :
Hay que desbloquear el bootloader para flashear cualquier particion, aqui en xda-developers hay muy buenas guias para hacerlo hasta para rootear, para descargar la rom de March hay que poner el navegador en ingles para que aparezca el enlace.
Por otro lado, les pido que no sigan haciendo estas preguntas aquí ya que este hilo es para discutir el desarrollo del kernel, no para responder preguntas que han sido respondidas cientos de veces en este foro. Mis mejores deseos.

thanks for your words , ok no problem . thanks very much and your kernel look very good.

 

[rhetorician]

Latest crDroid will not boot, including the new zip you posted just a little bit ago. February Radioactive is fine, though. Clearly, this is an issue with the ROM (not the kernel), but I wanted others to know that it isn't yet compatible.

 

[phaino00]

Thanks, hope this time everything is fine.

Running smoothly so far. Can't thank you enough. I'll update tomorrow.

 

[jploco]

Funcionando sin problemas hasta ahora. No puedo agradecerte lo suficiente. Actualizaré mañana.

bro , have you installed this kernel with stock rom ? uptade of march or, have you a custom roms with this kernel?

 

[phaino00]

bro , have you installed this kernel with stock rom ? uptade of march or, have you a custom roms with this kernel?

I use it with stock march firmware.

 

[phaino00]

Thanks, hope this time everything is fine.

Unfortunately, there was a reboot overnight. I attached my sys/fs/store file.

 

[acuicultor]

Unfortunately, there was a reboot overnight. I attached my sys/fs/store file.

Thanks, I'll take a look asap

 

[Sui77]

First of all: THX!

Beside that, I'm a bit lost between 1.0.5 and 3.0.0.
Which one is the right one for latest QPR2?