[KERNEL][REF][Q&A] Siyah 5.0+[ICS/CM10] 6.0b5+[JB/CM10.1] +DISCUSSION+. NON-DEV!!!

Search This thread

THE RED BLUR

Senior Member
Mar 7, 2012
6,995
21,770
0
LONDON
guys my sd card isn't detected and I can't mount sd card. Any advice?

Have you tried in recovery to mount Sdcard?

I had a similar experience on another kernel and my mounting and unmounting it solved it for me when rebooting.

Plus what would help GM and others is

1.What version of kernel are you using.

2. What version did you install tar or zip.



SIGNATURE


PHONE : SGSII
Sent via: Tapatalk 2
Main ROM: Alliance rom v5.1

KERNEL : Siyah v6.0b2.
(DEFAULT PROFILE AND SETTINGS)
MODEM :
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb




---------- Post added at 03:41 AM ---------- Previous post was at 03:37 AM ----------

siyah 5 gave me status 7 too, the answer was:

flash dori, reboot recovery, flash siyah 6b2. worked:good:

Ok so there is an issue with philz recovery. What would help is any particular version of Dorimanx you used?

So the options is clear now.

Either flash via odin or use Dorimanx kernel recovery to flash I'm guessing it should be okay to use the most recent version since its only for the recovery.

SIGNATURE


PHONE : SGSII
Sent via: Tapatalk 2
Main ROM: Alliance rom v5.1

KERNEL : Siyah v6.0b2.
(DEFAULT PROFILE AND SETTINGS)
MODEM :
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb


 
  • Like
Reactions: bazzanaja

bazzanaja

Senior Member
Jul 2, 2009
147
14
38
Have you tried in recovery to mount Sdcard?

I had a similar experience on another kernel and my mounting and unmounting it solved it for me when rebooting.

Plus what would help GM and others is

1.What version of kernel are you using.

2. What version did you install tar or zip.



SIGNATURE



PHONE : SGSII
Sent via: Tapatalk 2
Main ROM: Alliance rom v5.1

KERNEL : Siyah v6.0b2.
(DEFAULT PROFILE AND SETTINGS)
MODEM :
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb



I installed b2 via odin. And yes, I've tried mounting and unmounting in recovery. It says error mounting sdcard. Please recommend what should I do? Thanks.
 

THE RED BLUR

Senior Member
Mar 7, 2012
6,995
21,770
0
LONDON
I installed b2 via odin. And yes, I've tried mounting and unmounting in recovery. It says error mounting sdcard. Please recommend what should I do? Thanks.

What I would do now is flash siyah once again but via cwm and that should resolve the issue. ;)

SIGNATURE


PHONE : SGSII
Sent via: Tapatalk 2
Main ROM: Alliance rom v5.1

KERNEL : Siyah v6.0b2.
(DEFAULT PROFILE AND SETTINGS)
MODEM :
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb


 

bazzanaja

Senior Member
Jul 2, 2009
147
14
38
What I would do now is flash siyah once again but via cwm and that should resolve the issue. ;)

SIGNATURE


PHONE : SGSII
Sent via: Tapatalk 2
Main ROM: Alliance rom v5.1

KERNEL : Siyah v6.0b2.
(DEFAULT PROFILE AND SETTINGS)
MODEM :
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb



Redblur thanks for your help. However the problem still persists. My phone can't seem to detect and mount sd card. (It was working on philz kernel though). sigh..
 

hyperthrust

Senior Member
Dec 7, 2012
503
702
0
Redblur thanks for your help. However the problem still persists. My phone can't seem to detect and mount sd card. (It was working on philz kernel though). sigh..


Sent from my GT-I9100 using xda premium

Hi. So not messing about in recovery has helped at all in terms mounting system, card, ?
 

bazzanaja

Senior Member
Jul 2, 2009
147
14
38
Sent from my GT-I9100 using xda premium

Hi. So not messing about in recovery has helped at all in terms mounting system, card, ?

Hello, nope the phone still can;t detect it. I'm going back to philz for the time being.

EDIT: It's definitely weird that once I flash back to philz kernel, the sd card is detected. I really would like to use gokhan's kernel though, the wifi seems to be better at not wakelocking.

EDIT 2: FINALLY SOLVED THE PROBLEM!! Formatted the card and deleted all partitions on it and it's working flawlessly.!
 
Last edited:

OGroteKoning

Senior Member
Dec 26, 2011
426
167
0
Thank you GM for the hard work! Having Siyah back on my phone feels like the first night sleeping in my own bed after a long holiday. You are a genius and a master. I hope you have a fabulous Christmas with your family. I certainly will.

Also to my fellow followers of GM and his trendsetting Siyah kernel, a merry Christmas to you too! Our gift came early :D

Sent from my Galaxy S2
 
  • Like
Reactions: t-pip

nogo8888

Senior Member
Oct 31, 2012
832
926
0
noticed something now, when charging scrolling seems not so smooth unlike awhile ago when my phone was not attached to charger.

anyone had noticed this?

i9100
XXLSJ NeatROM lite v4.0
Siyah-S2-v6.0b2
 

pilgrim011

Senior Member
May 3, 2008
1,639
456
103
Belgrade
www.tvojsajt.com
Ok, first report: fast USB charging works! Yay!!!:laugh: Video recording is broken. Headphone amplifier isn't working, but analog headphone amplifier works fine. While listening to music on stock player, I have noticed some stuttering - the icons of songs are redrawing as I scroll through songs. Maybe related to broken video recording?

That's it for now, will report as soon as I find more glitches.;)
 

JoHnNy08PL

Senior Member
Oct 11, 2010
453
132
0
Bydgoszcz
Headphone amp doesnt boost in Stweaks

edit : I bought voodoo louder works fine to boost with that. thanks
In Voodoo Louder I got this error:

Problem during driver configuration:
Unable to find ASoC codec_reg interface

Code:
 Hi.
I'm contacting you about Voodoo Louder because:


 - Detected supported device:
Galaxy S II
 - Detected supported device:
Galaxy S II
 - Detected supported kernel:
3.0.31-Siyah-s2-v6.0b2+
Linux version 3.0.31-Siyah-s2-v6.0b2+ ([email protected]) (gcc version 4.4.3 (GCC) ) #28 SMP PREEMPT Sun Dec 23 15:49:04 PST 2012
 - Superuser permissions granted
 - Driver loaded successfully
 - Problem during driver configuration:
Unable to find ASoC codec_reg interface

Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 86
    hi guys.

    I was away for some time and I didn't read most of the messages lately including the ones in my s3 and xperia threads as well as the discussion threads.
    I have just skipped to the end.
    as you have read in the announcement post of v6.0b5 I know have an s2 (thanks to mbwatson. the device is perfectly working).
    I have tested v6.0b5 on omega rom v20 and yesterday's cm10.1
    I am hoping to release it tonight or tomorrow.
    it is still beta because dualboot needs some more work.
    you can have two cm10.1 or any other cm-based rom but not samsung JB as first or 2nd.
    the changes are not difficult but the repository that I need to clone is big.

    I hope I will add dualbooting in b6 and I will also add some touch2wake patches (implemented by robertobsc. we were talking about it for a long time but his last email is still being kept unread in my mailbox which was sent about a month ago :) )
    then I will spend some time on cypress driver because samsung has changed it a long time ago (and now they have changed it again) but we are still using good-old-messy-driver which has all BLN related changes.

    that's all for now. I doubt I will have time to read and post more, so please give help to those who seek it :)
    70
    I had some time today and merged JB kernel with my modifications.
    there were too many conflicts (because of my previous merges with s3 kernel) and I resolved them in 20-30 minutes.
    I have sent the blindly compiled kernel to a friend and he said that it booted but the modem did not work.
    so, everything is (almost) ready. I just need an s2 for several hours.
    then some time to make dual-boot related changed (I need at least a day)
    I have also put cm10.1 support but I think I will have to remove it because it moves your sdcard contents to a subfolder named 0. multiuser support will create different folders for different users and that will probably break dualboot support.
    so, I will have to find another place to store dual-boot related files.
    69
    can anyone state in a few sentences the very major differences between stock cm10, siyah and dorimanx kernels?
    strong and not so strong points of each of them.

    this would be useful for a large majority of 'not sophisticated' users to make a decision which kernel to choose.

    cm10 is the best kernel for cm10 based ROMs. it is developed by the guys who know what they are doing.

    siyah have some cherrypicks from here and there and some new features. I no longer cherrypick commits that I cannot understand (I used to be doing that a lot). STweaks lets you make some changes easily, without the need of init scripts. siyah supports both samsung and cm roms (except for 10.1) and you can use dualboot feature to have two roms at a time.

    dorimanx's kernel has lots of cherrypicks and he generally tries to catch the latest upstream. I don't understand most of his cherrypicks and he doesn't neither. I guess he trusts the commits from upstream but it may cause instabilities sometimes. however, if those instabilities are fixed those commits may give you some additional performance or even stability (irony? yes). that kernel also have STweaks support and has some more configurables. Dorimanx also uses my commits to support both samsung and cm roms with a single image and also the recovery+initramfs that I modified for dualboot feature. in initramfs there are some more scripts + optimizations some of which I find dangerous and unnecessary but most of them are optional anyway.

    so, if you want to play safe and make sure everything runs as expected use cm10 stock kernel.
    if you want some new features and have time to play with some settings use siyah.
    if you have more time and want to have currently the most benchmark-friendly , fast and up-to-date (considering the cherrypicks from upstream) kernel with some experimental features use dorimanx.
    61
    it is a little unfair to expect people doing something for free and fun to do it very well documented and perfect.

    I never claimed that my work was perfect. indeed, it is not. and I can live with that. also a lot of people can live with that and like it.

    even samsung doesn't do it properly even though you have paid for their product. releasing defective chips, buggy kernels, no commit history, late or sometimes no release for the changes in the kernel (violating gpl), no documentation, no source to support opensource development...

    yeah, I know, some users may flash the latest one on ICS (even on gingerbread, or on another S2 variant) and soft-brick their device. they will have to use odin and nobody should flash any kernels if they cannot take the risk.

    so, dikidera: either you should stop flashing kernels, or I should stop making new ones.
    wanna open a voting poll for it? :p
    58
    sorry guys but I don't have any s2 around.
    as soon as I borrow one I will compile another kernel and also fix dual booting problem with Samsung JB
    I'm also a little busy lately. I am planning to borrow a friend's phone next week for an update.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone