[Kernel][Roms][TW/MIUI/CM9-10][Aroma][Menu][Dual Boot 5Roms GT-N7000 v2.3c [10-27-12]

[Phil3759]

PhilZ-cwm6 v3.99 dual boot XXLSC

http://www.mediafire.com/file/54cw74zahhnji2e/PhilZ-cwm6-XXLSC-XJB-3.99-dual-unsigned.zip

Sorry but pain to do this as I need to do it manually
Hope to add true dual boot support in the furture

 

[hara74]

PhilZ-cwm6 v3.99 dual boot XXLSC

http://www.mediafire.com/file/54cw74zahhnji2e/PhilZ-cwm6-XXLSC-XJB-3.99-dual-unsigned.zip

Sorry but pain to do this as I need to do it manually
Hope to add true dual boot support in the furture

thanks a lot :thumbup:

sent from my G-Note

 

[Primokorn]

Hi
Could we flash pre-installed CM10 rom directly from ICS stock rom.
Because on official thread the dev says that it's necessary to flash CM9 before. Thanks for your help.

 

[letaureau]

The steps i followed were ::
- Select Tools section. Then select the rom slot you want. If this is the first time you use that rom slot you need to setup system, data, and cache images for the rom. In page 1 of the tool, check "Setup System" and "Setup data & cache" to setup the images. You need to do this only one time
- In page 2, select "Wipe system", "Wipe data", and "Wipe cache"
-And the most important one, select "Mount Partitions". Don't forget to select "Mount Partitions" otherwise it will overwrite the data and mess up your phone rom.
-Press Next until complete, and don't reboot the phone. (If you see any error, reboot in to recovery and try again)
3. Make sure you don't see any error in the step 2. then you can now flash any rom you like as normal. It will be flashed to the rom slot you just select in the step 2. Don't reboot after complete because you need to flash a dualboot kernel after.
4. Flash Chuan_Dualboot_Aroma_v1.8.zip again, then select "Set Default Booting Rom", then select the same rom slot in step 2.
- Then select "SDCard" as default, and select "Don't Share"

As i was planning to use ultimate xxlsc and jelly bam i decided to use phillz 3.99 dual-boot as the kernel after choosing no for the kernel install

and then i setup the second rom Jelly Bam 5.1 as sdcard 2 but leaving "default booting rom" as sd card 1
but the problem is i can only access the rom installed on sdcard 1 and even after pressing home button on and off i cant access the second rom ..

 

[pinoypower]

The steps i followed were ::
- Select Tools section. Then select the rom slot you want. If this is the first time you use that rom slot you need to setup system, data, and cache images for the rom. In page 1 of the tool, check "Setup System" and "Setup data & cache" to setup the images. You need to do this only one time
- In page 2, select "Wipe system", "Wipe data", and "Wipe cache"
-And the most important one, select "Mount Partitions". Don't forget to select "Mount Partitions" otherwise it will overwrite the data and mess up your phone rom.
-Press Next until complete, and don't reboot the phone. (If you see any error, reboot in to recovery and try again)
3. Make sure you don't see any error in the step 2. then you can now flash any rom you like as normal. It will be flashed to the rom slot you just select in the step 2. Don't reboot after complete because you need to flash a dualboot kernel after.
4. Flash Chuan_Dualboot_Aroma_v1.8.zip again, then select "Set Default Booting Rom", then select the same rom slot in step 2.
- Then select "SDCard" as default, and select "Don't Share"

As i was planning to use ultimate xxlsc and jelly bam i decided to use phillz 3.99 dual-boot as the kernel after choosing no for the kernel install

and then i setup the second rom Jelly Bam 5.1 as sdcard 2 but leaving "default booting rom" as sd card 1
but the problem is i can only access the rom installed on sdcard 1 and even after pressing home button on and off i cant access the second rom ..

i think both roms need to be TW-based for you to dualboot.

 

[AndroidSlave]

That is correct. If using the philz dualboot both ROMs must be tw jb leaks. Also you can't have a ROM that uses preload as an alt

 

[Sawas]

I was looking for such kernel before and when I stumbled apon it I was glad.However my happiness was short lived after I downloaded it and try the install according to the procedure when neither the Phone ROM or SD Card ROM would boot.The following is what I did so if there is an error will someone point it out to me so I can fix it.

I am running SlimSWizz4 on my Phone and I wanted to install SlimWizz2 to try this one out at first.

1.Flash Chuan Dual Boot 2.3C and select Tools then choose the slot number I wanted which was external SD Card 1.Setup System,Data and Wipe System,Data and Cache then Mount Partitions.
2.As I didnt have an errors I proceeded to Install my chosen ROM.
3.Flash Chuan again and this time Set SD Card Slot 1 as Default then Reboot.
4.I choose Hydracore 4.3b OC kernel
5.Reboot
6.Phone will just boot to Samsung Logo and then sleep of Death.

How then can I achieve dual boot on my N7000?

Finally, I finished creating my scripts & kernel for booting a rom on SD Card. Dual boot kernels, preinstalled roms, setup scripts, instructions are available below.
www.mediafire.com/?oob18xxqit8cqmy[/url] - initramfs source for my dualboot3.1 feature.

 

[pinoypower]

I was looking for such kernel before and when I stumbled apon it I was glad.However my happiness was short lived after I downloaded it and try the install according to the procedure when neither the Phone ROM or SD Card ROM would boot.The following is what I did so if there is an error will someone point it out to me so I can fix it.

I am running SlimSWizz4 on my Phone and I wanted to install SlimWizz2 to try this one out at first.

1.Flash Chuan Dual Boot 2.3C and select Tools then choose the slot number I wanted which was external SD Card 1.Setup System,Data and Wipe System,Data and Cache then Mount Partitions.
2.As I didnt have an errors I proceeded to Install my chosen ROM.
3.Flash Chuan again and this time Set SD Card Slot 1 as Default then Reboot.
4.I choose Hydracore 4.3b OC kernel
5.Reboot
6.Phone will just boot to Samsung Logo and then sleep of Death.

How then can I achieve dual boot on my N7000?

Did you try another kernel? I think Hydracore is not compatible with the new JB leaks as I also encounter the same problem before. Try Philz 3.99 Dual boot kernel posted few posts above, worked for me all the time. Follow the steps for flashing mods in the original post and you should be fine.


Sent from my GT-N7000 using XDA Premium HD app

 

[hara74]

AW: [Kernel][Roms][TW/MIUI/CM9-10][Aroma][Menu][Dual Boot 5Roms GT-N7000 v2.3c [10-27

I've a question for the pros out there

as phone rom I use the slimwizz2 tablet which working with preload folder,
if I want to flash as sd rom a new xxlsz which also working with preload folder,
can I just rename the folder e.g. preload1 and flash the new rom which build a new preload folder or
will the original get wiped or overwritten?

thanks for answers in advance

sent from my G-Note

 

[zviki]

That is correct. If using the philz dualboot both ROMs must be tw jb leaks. Also you can't have a ROM that uses preload as an alt

There is your answer... Three posts above!

...from SG NOTE N7000 with Tapatalk 2

 

[hara74]

AW: [Kernel][Roms][TW/MIUI/CM9-10][Aroma][Menu][Dual Boot 5Roms GT-N7000 v2.3c [10-27

I only want confirm that the latest dualboot Kernel lsc works with the new Roms based on lsz

I flashed as phone rom Slimwizz5, moved the few apps from preload to system, what worked without problems,
and flashed the new Team Union to sd card with all wipes,
flashed the dualboot Kernel directly in cwm again

I asked Phil for the latest lsz kernel to make it for dualboot,
but he needs more time to do it,
so we've to be patient

sent from my G-Note

 

[Phil3759]

XXLSZ - fixed bootloop - dualboot

http://www.mediafire.com/file/bjq8xad6mezgxgg/PhilZ-cwm6-XXLSZ-OXA-4.63-fixed-dualboot.zip

 

[hara74]

AW: [Kernel][Roms][TW/MIUI/CM9-10][Aroma][Menu][Dual Boot 5Roms GT-N7000 v2.3c [10-27

XXLSZ - fixed bootloop - dualboot

http://www.mediafire.com/file/bjq8xad6mezgxgg/PhilZ-cwm6-XXLSZ-OXA-4.63-fixed-dualboot.zip

great Phil,
thanks a lot

edit: just flashed and is working fine for me,
booted phone rom and also sd rom :thumbup:

Sent from my WM8850-mid using xda app-developers app

 

[masters_gng]

A little help

Hello guys,
I am a newbie in this
can u pls tell me can i dual boot jb and gb
i am running ultimate lsz 5.2 and want to dual boot any oder ginger bread!!!
actually wanted to use chainfire for playing sum games!!
pls help me guys !!!

 

[hara74]

AW: [Kernel][Roms][TW/MIUI/CM9-10][Aroma][Menu][Dual Boot 5Roms GT-N7000 v2.3c [10-27

Hello guys,
I am a newbie in this
can u pls tell me can i dual boot jb and gb
i am running ultimate lsz 5.2 and want to dual boot any oder ginger bread!!!
actually wanted to use chainfire for playing sum games!!
pls help me guys !!!

sorry,
I guess it`s not possible to switch between JB and GB

sent with Next Wolf

 

[AndroidSlave]

Hello guys,
I am a newbie in this
can u pls tell me can i dual boot jb and gb
i am running ultimate lsz 5.2 and want to dual boot any oder ginger bread!!!
actually wanted to use chainfire for playing sum games!!
pls help me guys !!!

You wpuld have to have GB as your main.. and ultimate as secondary... flash abyss 4.2 every time you want to boot GB. Flash LSZ multiboot Kernel to boot secondary ultimate JB ROM.

Sent from my GT-N7000000000 using Tapastalker 2

 

[hara74]

You wpuld have to have GB as your main.. and ultimate as secondary... flash abyss 4.2 every time you want to boot GB. Flash LSZ multiboot Kernel to boot secondary ultimate JB ROM.

Sent from my GT-N7000000000 using Tapastalker 2

yeah that´s right,
but don´t forget to set SD Rom (Ultimate) as default,
either with the Aroma or manually change the bootsdrom.cfg in SDRoms folder to sdcard

 

[clio94]

With the method by changing kernels i manage to run latest asylum with android 4.2.2 as main rom and from internal sd card tw jb burt rom.Thanks to all people who contributed in this project.

 

[masters_gng]

With the method by changing kernels i manage to run latest asylum with android 4.2.2 as main rom and from internal sd card tw jb burt rom.Thanks to all people who contributed in this project.

can u tell me which kernels u used and ur meathod!!

 

[clio94]

First i installed asylum in nand with normal way.Then i used dual boot aroma v2.3c to make empty partitions first in internal sd rom 1 and then i installed burt rom.After this i installed philz lsz dual boot kernel,i run again dual boot aroma and i choose to boot from sd card.When i want to go to asylum i am flashing latest official cm10.1 kernel from http://forum.xda-developers.com/showthread.php?t=1789397
Now i have modified dual boot aroma v2.3c and in goku position i copied zimage from philz lsz dual boot kernel,so when i want to go to burt rom i dont have to flash seperately the kernel and then run aroma