• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[KERNEL][SHIFT][SINGLE/DUAL][TW/CM]07/20/15[LINARO]

Search This thread

rogersb11

Senior Member
Nov 18, 2013
3,345
6,888
Indianapolis
Thats how i will get stweaks to work?


Yes, that's what I said in my response lol...




New kernel (5.7) rocks, I'm using it with wilson3q's CM 12.1 on a SCH-I650 and I have zero issues and I'm getting fantastic battery life (well over 6 hours screen on time) even when OC'ing to 1800 Mhz. Great job rogersb11, I appreciate your efforts!



Sent from my GT-N7105 using XDA Free mobile app

Fantastic. I haven't had any issues and ant small lag I would get OVER TIME with 5.5 seems to be gone as well. 5.7 had ramdisk changes and then about 15 commits in source and they were all aimed and speed enhancements
 

Ashwin Prabhunerurkar

Senior Member
Jun 5, 2012
1,262
3,954
24
Toronto/Mumbai
www.facebook.com
Yes, that's what I said in my response lol...



Sent from my GT-N7105 using XDA Free mobile app

Fantastic. I haven't had any issues and ant small lag I would get OVER TIME with 5.5 seems to be gone as well. 5.7 had ramdisk changes and then about 15 commits in source and they were all aimed and speed enhancements
Can you please consider making the recovery nd kernel for kitkat for N7100.
I love your kernel and we need a dual booting kitkat kernel desperately
 
Last edited:

danny_wasp

Member
Feb 7, 2010
28
5
Hi all,

First off many thanks for the dedication on bringing this kernel to life, it is brilliant but I'm having some issues I'm hoping someone could point me in the right direction.

I'm using this with the Cyanide L ROM, I'm experiencing freezes, delays and stuttering about after 3 hours of use.

Delays as in if i'm in an application and hit the home key or menu then nothing happens for about 5 seconds. After 3 hours of use then the phone becomes really stuttery, it lags everywhere until I restart the phone.

I haven't done any overclocking on my phone because of these issues and everything else is stock settings. It was all installed cleanly by completely wiping the phone.

Any help greatly received!

Edit : I'm using the N7105

2nd Edit : But of course, posting this is the Note II forums would give that away anyway *facepalm*
 
Last edited:

Athrun88

Senior Member
Jun 3, 2010
587
127
Toronto
Hello everyone,

Just flashed Shift-LP 5.7 and using it with Cyanide L; just wondering if there are any known issues with the sensors. AFIAK I was running Shift-LP 5.5 with Cyanide L and everything was working fine. When I updated to 5.7, it stopped working. Any tips or something I missed?

Basically what I did was this:

Wipe cache, flash 5.7, dirty flash Cyanide, boot

Thanks in advance.
 

rogersb11

Senior Member
Nov 18, 2013
3,345
6,888
Indianapolis
Hello everyone,

Just flashed Shift-LP 5.7 and using it with Cyanide L; just wondering if there are any known issues with the sensors. AFIAK I was running Shift-LP 5.5 with Cyanide L and everything was working fine. When I updated to 5.7, it stopped working. Any tips or something I missed?

Basically what I did was this:

Wipe cache, flash 5.7, dirty flash Cyanide, boot

Thanks in advance.
You have to flash the kernel after the ROM, you're running the stock kernel lol. ROM zip comes with stock kernel in case anybody (no clue why) doesn't use shift

Poisoned by CyanideL
 

rogersb11

Senior Member
Nov 18, 2013
3,345
6,888
Indianapolis
What is Shift-LP-5.7-Broken-l900-t0lte-i605 and is it better than the regular Shift 5.7?

Thanks
Jl probably misnamed it, it should have i605 and t0lte in it. He's the only person with permission basically to mess with my kernel and the l900 needs the ramdisk modified to work. The change for l900 would break the data partition for 605 and t0lte so unless you have the l900 don't flash it. Can you link me? Now I'm curious. Plus ramdisk would need other changes to work on broken anyway as it's aosp and not cm so it wouldn't boot cm anyway

Poisoned by CyanideL
 

thecensor

Senior Member
Mar 19, 2011
138
6
You can google it . It's in many places.

I have the l900 with CM 12.1, and the regular Shift 5.7 seems to works great. Should install the other one?
 

dicksteele

Inactive Recognized Contributor
Sep 4, 2010
3,808
2,741
California
You can google it . It's in many places.

I have the l900 with CM 12.1, and the regular Shift 5.7 seems to works great. Should install the other one?

It's more helpful if you point him to where you got yours. There's no guarantee what he finds is the same as what you are using.
Just because it has the same filename is not going to mean it's the correct file.

It could be cat videos. No one wants that.....
 
  • Like
Reactions: rogersb11

Visse0704

Senior Member
Feb 6, 2013
142
36
Is there a Way to get this kernel for the Marshmallow Resurrectionremix Rom?

I trying it with the ResurrectionRemix-M-v5.7.4-20160921-t0lte rom and Shift-MM-6.3 and got endless booting screen for longer as 5 min. :confused:

Sry 4 my bad English, I'm German :rolleyes:
 

Top Liked Posts

  • There are no posts matching your filters.
  • 49
    Shift Dual Boot/ TW and CM Kernel


    This kernel supports both TouchWiz and ALL of AOSP other than maybe Pac Rom but it is not my fault it isn't supported lol. They use their own name in the framework instead of the one EVERYBODY else does.

    CPU GOVERNORS: lazy, smartass, smartassV2, ondemand, powersave, interactive, performance, userspace, pegasusq, zzmoove
    I/O GOVERNORS: deadline, cfq, row, sio
    default cpu governor: ondemand
    default I/O governor: cfq
    CIFS & NFS Network FileSystems
    F2FS/EXT4
    kernel uses LZMA compression
    OverClock to 2160
    CPU Voltage Control
    GPU OC, UC and Voltage Control
    Boeffla Sound 1.6.6 (Use the control app from the play store)
    Charge Control
    TouchWake and Timeout support
    Slide2Wake
    DoubleTap2Wake
    Mdnie HiJack
    Dynamic Fsync Control
    Kernel gesture support
    Latest source updates

    Compiled with Linaro GCC 4.9.3

    STweaks is included for kernel configuration

    Install Instructions: Standard flash in recovery, dual boot instrustions will be listed below. When flashing AOSP flash the addon zip afterwards

    Downloads: Shift

    AOSP Sensor addon: Starting with build 3.1 this is NO LONGER NEEDED. The kernel will add the necessary sensors when aosp is booted

    Shift Lollipop Single boot kernel can bet found here. All features are the same aside from the needed updated for Lollipop to work correctly
    Downloads: Shift-LP-5.7

    Dual Boot Support will REQUIRE PhilZ Touch Advanced from here: PhilZ



    XDA:DevDB Information
    Shift-DualBoot-Kernel, Kernel for the Samsung Galaxy Note II

    Contributors
    rogersb11, ketut.kumajaya
    Source Code: https://github.com/rogersb11/android_kernel_samsung_smdk4x12/tree/shift

    Kernel Special Features: Dual Boot TouchWiz or Aosp ROM, Aroma recovery boot menus with PhilZ Advanced touch

    Version Information
    Status: Stable
    Current Stable Version: Dual=3.9/Single=LP-5
    Stable Release Date: 2015-04-03

    Created 2014-08-16
    Last Updated 2015-07-20
    11
    These are my personal boeffla settings that do not break the earpiece sound so often experienced by some but not by me lol

    WARNING, these settings WILL completely change your headphone jack into a BEAST. I'm serious please be careful. Without these I use car stereo at 26, with them I use maybe 14 and it's louder than the 26 so I'm advising to start low.



    71403ed5918730d926f0ecd8a61d0644.jpg
    147318baf622467250f197671a57c67a.jpg
    e4fecd4adec08b56f374364c50bdbd4c.jpg
    00fb657d3ecf1da4a83c124dce2ab9ef.jpg
    809a5ad42f73cbef0ddc254560787a4a.jpg


    Dual boot Instructions(will be updated)

    4. "I want to setup dual booting."
    A. There are four situations:-
    1) Sammy rom now. Want to use aosp as secondary.
    2) Sammy rom now. Want to use aosp as primary.
    3) Aosp rom now. Want to use sammy as secondary.
    4) Aosp rom now. Want to use sammy as primary.

    Prerequisites for any setup is
    a) Flash latest Shift kernel. BIG FAT WARNING: For AOSP Rom flash the Sensor update zip
    b) Flash latest Extended PhilZ Touch recovery: http://forum.xda-developers.com/galaxy-note-2/development-n7105/recovery-t2849091
    c) Atleast 90% battery left.
    d) 3 GB free on internal SD.
    e) Some spare time

    1) Present sammy, setup aosp as secondary:-
    i) Reboot into recovery
    ii) Select "Run Aroma Dual Boot Tool" in Advaced Menu, create system.img for CM/CM based ROM and then close it
    iii) Reboot into secondary recovery (red on screen navigation buttons)
    iv) Flash aosp ROM as 2nd ROM
    v) Flash Shift kernel again

    2) Present sammy, setup aosp as primary:-
    i) Reboot into recovery
    ii) Nandroid backup your current sammy ROM
    iii) Select "Run Aroma Dual Boot Tool" in Advaced Menu, create system.img for Samsung stock/stock based ROM and then close it
    iv) Reboot into secondary recovery (red on screen navigation buttons)
    v) Nandroid restore your sammy ROM as 2nd ROM
    vi) Flash Shift kernel again
    vii) Reboot into primary recovery
    viii) Flash aosp ROM as 1st ROM
    ix) Flash Shift kernel again

    3) Present aosp, setup sammy as secondary:-
    Same as (1), instead of flashing aosp to second, flash sammy to second.

    4) Present aosp, setup sammy as primary:-
    Same as (2), instead of flashing aosp to first ROM, flash sammy.

    NOTE:
    -To dual boot Two Aosp or Two Sammy roms, just follow (1) or (2) (depending on which one of them you want as primary/secondary), just flash Sammy instead of aosp or aosp instead of sammy.

    5. "What things should I be taking care off while dealing with dual booting?"
    A. - Make sure where you are: in primary or secondary recovery.

    6. "How to boot into primary rom?"
    A. AROMA based boot menu will help you on every boot.

    7. "How to boot into secondary rom?"
    A. AROMA based boot menu will help you on every boot.

    8. "Is kernel partition shared?"
    A. Yes. Same kernel boots both roms
    10
    UPDATE. Version 3.9 can be found here http://forum.xda-developers.com/devdb/project/dl/?id=10089

    I added ABB control and settings to support it in STweaks. I also completely redid my charging control interface in STweaks and it has it's own tab now with all of the correct options. Couple other small changes. Enjoy!!!!
    10
    Sorry I've been basically MIA lately guys but I haven't had a device. Mine broke about three weeks ago when it plummeted to it's death while I stared in horror. I was gonna be forced to stop development or move on when I could afford to. Thanks to and INCREDIBLY GIVING and just flat out AWESOME and REAL @gregsarg I've been resurrected. That guy loves these threads and this N2 community more than anyone I've ever come across in any of device threads I've been in or a part of. Dude helps on like every thread we have I think. He moved on to the S5, put it back in the box and came back here. Saved @eZdubzitmk4 at one point in a similar situation and then months later comes through in the clutch again. Nobody expects someone the donate a device but it happens because users like @gregsarg are around worrying about OVERALL device development for us N2 users. We all probably owe him a thanks because we've all inevitably gained something from him around these areas. So THANK YOU @gregsarg for your amazingly generous and truly sincere donation. I'm rocking a brand new NE5 Loader Note 2 and all because you kick ass. All development going forward from me here is because of him. Thank you man. You're a truly great friend. This will be located in the second post in this forum going forward.

    On that note I will also be releasing an really big update. I'll link my git for complete changes. Added 100 kHz CPU step for UC and enabled undervolting to 600. Added new mdnie switch, added initial Boeffla control to stweaks,Kernel gesture support in stweaks as well. I'll need to update the OP with instructions and link to Tungstwenty for full description. Touchkey disable option, zswap settings, and OOM control. Also fixed vibration control and added Dual Boot options. Also fixed profiles not restoring properlywhen saved. All that was added to STweaks. Updated LTE modem thanks to psndna88, added xbox controller module. USB mouse and keyboard support, needs supporting apk from here https://raw.githubusercontent.com/pelya/android-keyboard-gadget/master/USB-Keyboard.apk . This is tested and working great. Also ramdisk is brand new with auto fstab selection and full f2fs support. f2fs for TW SYSTEM is not working but it's not important and the real f2fs gain is on data and cache where that actually writing occurs. Fixed TW issue, need DN3 tested as I haven't had time only having device a few days now. Massive update to my philz recovery as well that is full supported by kernel and fstab selector. They function together to do many things. I HIGHLY recommend using them together. Downloads went down for whatever real (I've got a good idea) but if you're not using or at least trying this it is truly your loss. Very stable on both my roms Saber and Cyanide and any other AOSP rom I've ran. I don't use TW a lot but always use my own and last 4 days I've done about 12 clean installs to make sure the reboot issue is fixed and it's been an absolute rock. This is a great update and a great kernel IMHO, download and flash already LOL. Thanks as always guys. I freakin love this place and love trying to bring you new stuff for this badass device. Also thanks again to @gregsarg for the device. You're something else man

    Enjoy the update guys
    Downloads here http://forum.xda-developers.com/devdb/project/?id=5429#downloads
    Or here https://www.androidfilehost.com/?fid=95784891001615843
    10
    Almost ready guys. Working on f2fs and stweaks and it'll be ready. Touchwake 1.2 added as well from @DerTeufel1980 with slide2wake and double tap to wake as well. Also new and improved dual boot tool courtesy of @ketut.kumajaya with 2gb sparse image support. Meaning it automatically adjusts space needed for 2nd rom up to 2gb. Pretty awesome stuff

    Sent from my SGH-I777 using XDA Premium 4 mobile app