Updated to V0.10
Voltage Control
You can control it via shell/init.d scripts as follows
To over volt ALL frequencies by 10000 uv:
To under volt ALL frequencies by 10000 uv:
To set a specific frequency (ie 1.8 GHz) with a specific voltage (ie 1.25 volts) ]
Use SetCPU as a gui or sysfs to control CPU freq
DOWNLOAD
CWM FLashable zip:
V0.10
Here
Call Recording app by skvalex
http://dl.dropbox.com/u/44644505/CallRecorder_v.1.0.27_alpha_build05.apk
The app is offered on XDA for free but you can promote his work by Buying it in the MARKET
Trial of full version ( has more features )
http://xdaforums.com/showpost.php?p=19345181&postcount=750
SOURCE
V0.10
http://www.androidfilehost.com/.mrx/
Code:
[B][U]v0.10[/U][/B]
- uppatched to 2.6.35.14
- reverted my unreleased changes of the disabling of samsung debugging, it breaks lo power mode and causes SOD's
- Misc config tweaks
- Misc compiler tweaks
[B][U]v0.08[/U][/B]
- Up patched to 2.6.35.13 source
- merged some changed with Da_G's skyrocket source to fix cpu1 hot-plugging
this shiould solve issues of users having min clock stuck at 384mhz and/or max
stuck.
- fixed vdd_tables, system tuner will be supporting my kernel in up coming releases for this
system tuner, should no longer cause issues. as the hotplug fix solved this
[B][U]v0.06[/U][/B]
- Found tome Carrier IQ **** in tty consoles, removed it
sneaky sneaky...
- patched for call recording <--- DERP apparently it works with out my patch LOL
[B][U]v0.05.6[/U][/B]
- redid source tree from scratch
- Switched on OTG config options again (had them shut off)
- Battery issues resolved
- minor tweaks to autogrouping
- set kernel HZ to 300 for a smoother more responsive feel
- minor tweaks to lag free and smartass
- undervolts have been tested stable by many users and are in this release
[B]- PLEASE UNINSTALL SYSTEM TUNER AND CLEAR DALVIK CACHE THIS RELEASE[/B]
[B][U]v0.05.2[/U][/B]
- loosened up lag free so its not so twitchy at low freqs and ramping up and down constantly
- undervolted all freqs a fair bit
- added smartassv2 back in *Please TEST, i think i have solved the hang at max freq on wake*
- probably forgetting something else i messed with
[B][U]v0.05[/U][/B]
- sourced a multiprossesor service that actually wasnt ****ed and added to kernel
- turned on multi prossesor service and set it to shut off the second core on screen off
or when not needed, and only turn back on when needed
- Patched in BLN *thanks to romanbb*
- Patched services.jar to allow bln to notify you for most notifications from apps now
eg: gtalk, mms, sms app and ect..
- spiffy new boot logo ;)
[B][U]v0.04.1[/U][/B]
- removed smartassv2, its useless in its semi-working state, causing battery drain. I will figure out what its up to.
[B][U]v0.04[/U][/B]
- Lowered stock voltages a bit to get some better battery
- Fixed (i think) smartassv2 ramping up to max clock and then neglecting to ramp back down on wake from sleep
- Recommend using lagfree :)
[B][U]v0.03.2[/U][/B]
- fixed scheduler settings for new min freq, causing me SOD's on screen wake with notification
[B][U]v0.03.1[/U][/B]
- disabled 192MHz in the clock table so users cannot select it and cause a sleep of death situation.
- Default min freq now 384MHz
[B][U]v0.03[/U][/B]
- added in BFQ scheduler if users choose to use it you can use system tuner or other favored apps to change from CFS
- Added SmartassV2 and Iterative schedulers
- Tweaked SmartassV2 for our device
- Added ability to change voltage on the cpus with vdd_tables
[B][U]
v0.02:[/U][/B]
- 1.8ghz lag fixed ;)
- Autogrouping of scheduler added
- lagfree cpu scheduler added, with fully working sysfs interface to edit settings not set by default but recommended! its TITS!
- optimized build flags
- removed sysfs for vdd tables, we have not got it working yet. no worries you shouldn't need it yet ;)
- kernel compression changed for much faster boot times
[U][B]v0.01[/B][/U]
CK3+ Patch Set (Thanks to fellow Team Synergy member Ziggy471 for backporting)
OC 1.8 (Thanks to Romanbb's source tree)
Global UV Tables (Thanks to Romanbb's source tree)
All Debug shut off except samsung debugging (needed)
LZMA compressed
Carrier branded boot splash removed
init.d support
Voltage Control
You can control it via shell/init.d scripts as follows
To over volt ALL frequencies by 10000 uv:
Code:
echo "+10000" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_table/vdd_levels
Code:
echo "-10000" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_table/vdd_levels
To set a specific frequency (ie 1.8 GHz) with a specific voltage (ie 1.25 volts) ]
Code:
echo "1836000 1250000" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
Use SetCPU as a gui or sysfs to control CPU freq
DOWNLOAD
CWM FLashable zip:
V0.10
Here
Call Recording app by skvalex
http://dl.dropbox.com/u/44644505/CallRecorder_v.1.0.27_alpha_build05.apk
The app is offered on XDA for free but you can promote his work by Buying it in the MARKET
Trial of full version ( has more features )
http://xdaforums.com/showpost.php?p=19345181&postcount=750
SOURCE
V0.10
http://www.androidfilehost.com/.mrx/
Last edited: