[Kernel|TH4|Android 10]BeastMode Kernel vR154 for N960F (Linux 4.9.236)

Search This thread
I can't connect to my Samsung account after flashing the Kernel 152. Is there a problem with flash kernel 152?
I get same issue all orginal version from 1.48 to last!

I had to flash 148 then 150 to work.
But I had backup of 148 then flashed 150
Then there where no account issues
Ok, i didnt try with 148 then 150, but tried with 148 then 152, and get issue with they, i loged in samsung account before!
Even have backup kernel orginal before (inside dr.ketan rom), i restore it! Nothing work!
 
Last edited:

amit_coolcampus

Senior Member
Mar 30, 2013
330
46
Delhi
Samsung Galaxy Note 9
I have a small problem after kernel flash
That is, the phone comes back on the screen again and again after each unlock. That is, the phone is unlocked and the password is correct, but a few seconds later the phone is locked again and asks for the password. And this is always repeated. And you can not work with the phone at all
ROM = Dr.Keton Q08
Kernel installer = b154
Thanks to our friends for their help.
The problem is, ROM is not yet updated with sep patch but Kernal is. You should use V152 for now.
 

moderndaycowboy

Senior Member
Oct 4, 2015
210
36
Smyrne
I flashed te kernel and then flash the magisk,

I read it magisk flashing is not needed after I flashed.

does it harm to software any way?
 

amit_coolcampus

Senior Member
Mar 30, 2013
330
46
Delhi
Samsung Galaxy Note 9
I flashed r154 and sep patch of Ketan ROM. Everything is working fine except one weird thing. Gestures option is missing in the app called "hktweaks". How to bring that back?

********Updated *******

I flashed the file again and they are back.

---------- Post added at 10:49 PM ---------- Previous post was at 10:12 PM ----------

I flashed te kernel and then flash the magisk,

I read it magisk flashing is not needed after I flashed.

does it harm to software any way?
I dont think that will harm.
 
Last edited:

livagoth

Senior Member
Hey guys,which is the best settings for batt life life and performance coz its good and smooth compared to stock which is battery efficient but not smooth as this,there a slight battery drain on beast kernel

I have set the maximum frequency for all cores to 1794mhz and as minimum the lowest ones. Zram to 2gb and overall I am satisfied. However I would also like to hear about other configurations, as for sure there is room for improvement.
 

ochipapa

Senior Member
I have set the maximum frequency for all cores to 1794mhz and as minimum the lowest ones. Zram to 2gb and overall I am satisfied. However I would also like to hear about other configurations, as for sure there is room for improvement.
And how is the performance,is it smooth or sttuter coz if I set higher its not smoother but lower it does.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 48
    Incoming beast. Better post later.

    Based on Linux 4.9.236
    -Optimized Defconfig
    -Overclock BIG and little cores
    -Improved multicore performance
    -RGB color driver
    -LED Fade
    -Configurable CRC
    -Configurable Fsync
    -Personal tweaks
    -Overclock GPU (600MHz)
    -Add BFQ, FIOPS, SIO, and ZEN io schedulers.
    -Configurable selinux
    -Boeffla Wakelock blocker
    -WireGuard support
    -Wake Gestures
    -and MORE!

    Thanks:
    @flar2
    @Eamo5
    @farovitus
    @ianmacd


    Download: BeastMode Kernel vR154

    XDA:DevDB Information
    BeastMode kernel for N960F, Kernel for the Samsung Galaxy Note 9

    Contributors
    freeza
    Source Code: https://github.com/freeza-inc/bm-galaxy-note9-exynos-q

    Kernel Special Features:

    Version Information
    Status: Stable
    Current Stable Version: vR154
    Stable Release Date: 2020-09-12

    Created 2018-10-16
    Last Updated 2020-09-12
    21
    Reserved

    Changelog:
    vR154: Linux 4.9.236
    -Merge TH4 changes
    vR152: Linux 4.9.235
    -Updated OS level to 09-2020
    vR150: Linux 4.9.234
    vR149: Linux 4.9.233
    -Updated OS level to 08-2020
    vR148: Linux 4.9.232
    vR147: Linux 4.9.231
    -TG3 merge
    vR146 v2: Linux 4.9.230
    -Updated ramdisk elements and OS level 07-2020
    vR146: Linux 4.9.230
    -Fixed LED notification
    -Fixed Verified boot state showing in edxposed/other apps
    vR145: Linux 4.9.229
    vR144: Linux 4.9.228
    vR143: Linux 4.9.227
    -Updated to TF5
    -Updated OS LEVEL to 2020-06
    vR141: Linux 4.9.226
    vR140: Linux 4.9.225
    vR139: Linux 4.9.224
    vR137: Linux 4.9.223
    -Updated OS level to 2020-05
    vR136: Linux 4.9.222
    vR135: Linux 4.9.221
    vR134: Linux 4.9.220
    -Extended wakelock block list extensively
    vR131: Linux 4.9.219
    vR130: Linux 4.9.218
    -Android 10
    -TCA Source
    -OS level increased to April 1, 2020
    -Updated defconfig tweaks
    vR91: Linux 4.9.206
    -OS level increased to December 1, 2019
    vR90: Linux 4.9.205
    vR89: Linux 4.9.204
    vR88: Linux 4.9.203
    vR86: Linux 4.9.202
    vR85: Linux 4.9.201
    vR84: Linux 4.9.200
    vR83: Linux 4.9.199
    -OS Level increased to November 1, 2019
    -Ramdisk from SJ1
    vR82: Linux 4.9.198
    vR81: Linux 4.9.197
    vR80: Linux 4.9.196
    -October OS level/ramdisk
    -SI3 merges

    Older versions:

    vR77: Linux 4.9.194
    vR76: Linux 4.9.193
    -Updated OS level to 2019-9
    vR75: Linux 4.9.192
    vR74: Linux 4.9.191
    vR73: Linux 4.9.190
    -Merged SH2 changes
    vR71: Linux 4.9.189
    vR70: Linux 4.9.188
    vR69: Linux 4.9.187
    vR68: Linux 4.9.186
    -MoroSound 2.0
    -Few cherry-picks from TGP Kernel
    vR66: Linux 4.9.185
    vR65:
    -Disabled some more debug stuff
    -Destroyed the bug causing the display to become unresponsive, again!
    -Few patches and fixes
    vR59: Linux 4.9.184
    -Reworked sec_debug stuff
    vR58:
    -Fixed typo in dtsi. Thanks @Eamo5
    -Fixed super-slow mo. Thanks @Eamo5 for bringing this to my attention.
    vR51: LInux 4.9.183
    vR50: Linux 4.9.182
    -Updated to pie source (SF9)
    -Cherry picked from Endurance @Eamo5) and Exynos Linux Stable (@farovitus).
    -Tons of other crap i'll list later.
    -Magisk v19 included.
    vR32: Linux 4.9.147
    -Fix occasional unresponsive touch screen
    vR31: Linux 4.9.146
    -Disabled Kernel-Assisted Superuser for now
    -Updated ramdisk components to RL3
    vR30: Linux 4.9.145
    -Kernel-Assisted SU enabled
    vR28: Linux 4.9.144
    -Magisk v18 support
    vR27: Linux 4.9.143
    vR26: RK2 merge
    vR25: Linux 4.9.142
    -November patch (oslevel)
    vR21: Linux 4.9.137
    vR20: Linux 4.9.136
    -Fixed GPU voltage table for N960F
    -Fixed fast charging toggle not taking effect.
    -Re-enabled a few SEC_DEBUG entries
    vR13: Linux 4.9.135
    vR12: Linux 4.9.134
    -Merged with ELS 4.9.133
    -Wake Gestures (doubletap2wake, sweep2sleep, sweep2wake)
    -UKSM support
    -Tweaked out defconfig
    -Disabled SEC_DEBUG
    -WireGuard support
    -RGB (KCAL alternative. find it in /sys/class/mdnie/mdnie/rgb)
    -Overclock support
    -GPU Voltage table
    -Dynamic FSync support
    -LED pulse
    -CRC configurable
    -Enabled many TCP Congestion algorithms
    -cmdline safetynet patch
    -kthreads on little core/workqueues on small/active cores
    -front facing camera fixed
    -no more software corruption message
    vR02: Linux 4.9.85
    -Added BFQ,Zen,SIO,Deadline, and FIOPs IO schedulers
    -Added Boeffla Wakelock blocker
    -Added generic wakelock blocker (pre-defined wakelocks)
    -Disabled Gator driver
    vR01: Initial Release.
    -Based on RJ1
    -Linux 4.9.70.
    -Slightly Tweaked defconfig
    -Disabled Knox NCM/KAP
    -Disabled RKP
    -Disabled Root Restriction
    -Disabled defex
    12
    Changelog:
    vR12: Linux 4.9.134
    -Merged with ELS 4.9.133
    -Wake Gestures (doubletap2wake, sweep2sleep, sweep2wake)
    -UKSM support
    -Tweaked out defconfig
    -Disabled SEC_DEBUG
    -WireGuard support
    -RGB (KCAL alternative. find it in /sys/class/mdnie/mdnie/rgb)
    -Overclock support
    -GPU Voltage table
    -Dynamic FSync support
    -LED pulse
    -CRC configurable
    -Enabled many TCP Congestion algorithms
    -cmdline safetynet patch
    -kthreads on little core/workqueues on small/active cores
    -front facing camera fixed
    -no more software corruption message
    10
    Changelog:
    vR27: Linux 4.9.143
    --RK2 merge
    10
    Changelog:
    vR28: Linux 4.9.144
    -Magisk v18 support