• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[KERNEL] ThundeRStormS kernel for Samsung Galaxy S10/N10 family - only Exynos

Search This thread

nalas

Senior Member
Nov 19, 2012
1,288
1,010
Poland
UPDATE

ThunderStorms-Kernel-R-v2.5 : 03.07.2021 - upstreamed to Linux 4.14.238
for OneUI R and AOSP R (some ROMs - do backup Your current AOSP kernel)


AOSP is supported - PIXEL EXP may doesn't work !!!

Changelogs in2nd post.
- added support Fluid RT for boost RT (coverage_ratio and coverage_ratio_boost)
- added Interactive CPU governor modded by @nalas
(thx to MoRoGoKu for his port to S10)

Uploaded on AFH.
 

ochipapa

Senior Member
Jun 19, 2017
86
21
Samsung Galaxy Note 10+
ThundeRStormS Galaxy S10/N10 Exynos family for OneUI Q/R & AOSP R
SM-G970F/N, SM-G973F/N, SM-G975F/N, SM-G977B/N
SM-N970F, SM-N971N, SM-N975F, SM-N976N, SM-N976B


Compatibility notes :
Only for Android OneUI Q odexed and deodexed roms S10/N10 Exynos family ROMs
AOSP is supported - PIXEL EXP doesn't work !!!


Kernel features:
* Samsung source : FUCD/FUE3
* Samsung os date patch : 2021-05
* Linux source : backstreamed to 4.14.238
* Support for OneUI 3.x and AOSP R (some Roms - I don't have AOSP - for Your own risk - do kernel backup)
* Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
* Device Tree Blobs in one Aroma installer
* Removed Freqvar Tune - block edit time_rate by user
* App blocker : blocked LKT, Lspeed, NFS, FDE, Ferravolt (You can get restart the phone if You use this apps)
* Optimizations in Linux source
* Sched/CPU Governors : modded schedutil by @nalas (schedutil_ts), ondemand, interactive
* Powersuspend drivers updated to v2.0
* Gentle Fair Sleepers support
* Adaptative Fast Charge
* Fsync Control toggle
* Mass Storage support
* Morosound v2.1.1 - thx to Moro
* Added a lot of TCP/IP algorythms
* Added a lot of I/O schedulers
* Added standard Wakelocks support
* Support GPU Voltage Control
* Added Boeffla v1.1.0 Wakelocks Blocker support
* Added CPU govs: Blu_Schedutil, Ondemand, TS_Schedutil
* Added editable by user up/down rate-limit in TS_Schedutil
* Battery settings: Store Mode, Charging Levels and Unstable Power Detection
* Added Power Energy consumption tracking (in last_kmsg) from Linux 5.x
* Added Sustanable Freq for BIG CPU - set at 1820MHz
* Support FlatMem
* Support Frandom x15 faster then Linux Urandom - disabled bcose Srandom is enabled
* Support Srandom x150 faster then Linux Urandom
* Removed Support Suspend Freq's for each CPU - max/min freq for screen off time
* Support turn on/off DVFS for GPU
* Support CONFIG_HZ to 25Hz, 50Hz, 100Hz, 250Hz, 200Hz, 300Hz, 1000Hz - set at 100HZ
* Enabled VNSwap and ZRAM - 1Gb for 8GB and 2.5GB for 6GB of RAM devices
* Support F2FS, CIFS and NTFS (R/W)
* Support Fingerprint Boost
* Support Battery Saver module
* Support Sustanable Freq for BIG Core - 1820MHz
* Support Frandom (10x faster then Linux Urandom)
****** ONLY BY fLASHING DTB/DTBO img ***********
* Device Tree Blobs support (dtb and dtbo) [Underclock Littel CPU to 130MHz, disable Freqvar up/down_limit_rate_us - user can edit it in ts_schedutil settings, CPU/GPU optimizations)
* Support for lower frequencies in Mid CPU to 377 MHz
* Support for OC frequencies for All CPU's to 2106/2400/3016 MHz
* Support Underclock for GPU to 100MHz (only with DBT/DTBO partitions flashed)
* Unlocked OC/UC in kernel source for all CPU's
* Support GPU undervolt and throttling settings
********************************************************
* Support Battery settings : Charging Level, Store Mode, Unstable Power Detection
* Support Init.d scripts: /vendor/etc/init.d
* ThunderTweaks v1.0.8.0
* Magisk 22.1 Offcial build in kernel - thx to CruelKernel Team
* Optimized for battery life
* Compiled via GCC 6.0.1, GCC 8.0.1 (Samsung S20), GCC 10.2 (Arter97 & Cruel) and Clang 12.0 (Proton) toolchain
* Kernel use an AROMA installer to help guide you through the installation.

TOOLCHAINS: Arter97 and Cruel - breaks WIndows 10 assistant app connection - QR camera doesn't work.

Recommended Apps:
To tweak most of the settings in the kernel, I recommend using ThunderTweaks app.
_________________________________________________

IMPORTANT INFORMATIONS:
1. WARNING: YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
2. YOUR WARRANTY CAN BE VOID.
"I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point
the finger at me for messing up your device, You can't blame me for this fact."

3. NO REQUESTS!!!

_________________________________________________

INSTALLATION PROCESS:

FOR STOCK ODEX/DEODEX ROMS - read carefully
  • FIRST - Clear cache apps like Kernel Adiutor or MTweaks or another one in system app menager !!!
  • Backup EFS, DTB, DTBO, DATA and KERNEL as always in TWRP !!!
  • Download the latest kernel version zip file
  • Use only not patched (magisk) recovery - kernel has magisk build-in
  • Flash the CLEAN ROM, next restore Your DATA and flash the kernel zip with root or not
  • Choose aroma selection | If You don't know what Device Tree Blobs are and how to use it so don't flash it - You can brick Your phone !!!
  • If You have fingerprint patter problem pls use link from CruelKernel for patch img file for another date. Link
  • Reboot
  • ThunderTweaks app is copied to Your sdcard/ThunderTweaks folder. You can install it manually.

PROBLEMS / BUGS:
No f2fs partition support - Kernel support this kind of system files, if You can't get acces to this so look ROM you are using support f2fs or not.
You can look into fstab.exynos9825 file located in /vendor/etc/ folder.
If in line with DATA partition is only ext4 - so means ROM not support f2fs.
-------------------------------
Device Tree Blobs will be present on all another kernels (are in dtb/dtbo partition so flashing only boot.img not helps) - so if You want to change it for stock or another kernel You have to flash this partitions via ODIN or TWRP.
If You have no frequencies lower then stock so You have not flashed modified DTB/DTBO partitions !!!
-------------------------------

Make F2FS working:
- Make backup You fstab file first : /vendor/etc/fstab.exynos9820
- Edit Your fstab file by add this two lines:
/dev/block/platform/13d60000.ufs/by-name/cache /cache f2fs rw,nosuid,nodev,noatime,inline_xattr,flush_merge,nobarrier wait,check,formattable - makes bootloop
/dev/block/platform/13d60000.ufs/by-name/userdata /data f2fs noatime,nosuid,nodev,discard,usrquota,grpquota,fsync_mode=nobarrier wait,check,quota
- or rename this file (View attachment 5102439) to fstab.exynos9820 and copy via TWRP to system_root/vendor/etc/ folder and set permissiont by chmod to 0644 and reboot the phone.
- F2FS is full support now.

Back to stock/previouse Device Tree Blobs:
1) ODIN
- Unpack dtb.img.lz4 and dtbo.img.lz4 from Your latest stock frimware AP....md5
- Pack this two files to dtb.tar archive file
- Run latest Odin and Unset Auto Reboot, add dtb.tar to AP section, add Home_CSC to CSC section, next connect Your device in Dwonload Mode, Flash
- Reboot.
2) Flashable TWRP
- use flashable zip file from another kernel - flash via TWRP
- You can make dtb/dtbo as a flashable zip file and flash it via TWRP | for flash use :
dd if=/tmp/your_name_folder/dtb.img of=/dev/block/platform/13d60000.ufs/by-name/dtb bs=4096
dd if=/tmp/your_name_folder/dtbo.img of=/dev/block/platform/13d60000.ufs/by-name/dtbo bs=4096

Thanks for reports.
_________________________________________________

CREDITS :
- The Linux Kernel Archive for the Linux Patches https://www.kernel.org/
- Samsung Open Source Release Center for the Source code http://opensource.samsung.com/
- @osm0sis for Android Image Kitchen and anykernel2 https://forum.xda-developers.com/showthread.php?t=2073775
- Magisk and SuperSu Team for root method
- @evdenis Denis Efremov and Cruel Team for source, Samsung updates and help.
- MoRoGoKu, Anan1211, Pascua28, Corsicanu
- Ambasadii
- @TheMadScientist, @bartolomeo10, @touseef77, @okij, @tin2404 and tester group.
_________________________________________________

SOURCE of the kernel:
GitHub:
https://github.com/ThunderStorms21th/Galaxy-S10
_________________________________________________

Contributors:
@nalas
ThundeRStormS Team
_________________________________________________

DISCUSSION:
Telegram Group:
Link
Telegram News Channel:
Link
_________________________________________________

Version Information:
Statsus : Stable
Current version : AiO v2.5 (All in One)
Release Date : 2021-07-03

_________________________________________________
DONATION:
If you liked my work, you can collaborate by giving thanks and with some donation to continue working hard.
Thank you very much to all.
DONATION

_________________________________________________
CHANGELOGS & DOWNLOADS in 2nd post
_________________________________________________
 

nalas

Senior Member
Nov 19, 2012
1,288
1,010
Poland
UPDATE

ThunderStorms-Kernel-R-v2.6 : 21.07.2021 - upstreamed to Linux 4.14.240
for OneUI R and AOSP R (some ROMs - do backup Your current AOSP kernel)


AOSP is supported - PIXEL EXP may doesn't work !!!

Changelogs in2nd post.
- added supportSustanable Freq's for big.Mid CPUs
- Battery Saver module turn off all boost
(in ThunderTweaks settings)

Uploaded on AFH.
 

New_to_this1

New member
Jul 23, 2021
4
0
UPDATE

ThunderStorms-Kernel-R-v2.6 : 21.07.2021 - upstreamed to Linux 4.14.240
for OneUI R and AOSP R (some ROMs - do backup Your current AOSP kernel)


AOSP is supported - PIXEL EXP may doesn't work !!!

Changelogs in2nd post.
- added supportSustanable Freq's for big.Mid CPUs
- Battery Saver module turn off all boost
(in ThunderTweaks settings)

Uploaded on AFH.
Hi, can I install this on lineage os 18.1?
 

New_to_this1

New member
Jul 23, 2021
4
0
Hi again,@nalas. My phone is bootlooping and I'm not sure where I'm going wrong.
  1. I first booted into my stock TWRP.
  2. Then I formatted my data.
  3. Then I rebooted back into TWRP and flashed lineageos.
  4. Then I flashed the arter kernel, wiped dalvik cache and rebooted to system.
  5. Then the bootlooping occurs.
  6. Could you please explain how to install this kernel? My device is an SM-N970F.
  7. Also previously I tried these kernels on stock rom (android 11 one ui 3.1). It installed successfully however , WIFI and Auto-Rotate weren't enabling. Mind you, it was the 03/07/2021 update that I installed on the stock rom.
  8. The failed attempt on lineageos was with the latest version of the kernel.
 

nalas

Senior Member
Nov 19, 2012
1,288
1,010
Poland
Hi again,@nalas. My phone is bootlooping and I'm not sure where I'm going wrong.
  1. I first booted into my stock TWRP.
  2. Then I formatted my data.
  3. Then I rebooted back into TWRP and flashed lineageos.
  4. Then I flashed the arter kernel, wiped dalvik cache and rebooted to system.
  5. Then the bootlooping occurs.
  6. Could you please explain how to install this kernel? My device is an SM-N970F.
  7. Also previously I tried these kernels on stock rom (android 11 one ui 3.1). It installed successfully however , WIFI and Auto-Rotate weren't enabling. Mind you, it was the 03/07/2021 update that I installed on the stock rom.
  8. The failed attempt on lineageos was with the latest version of the kernel.
For aosp you have akways again flash bl cp from corsicanu twrp flash version, if you go aosp to one ui and one ui to aosp.

If is aosp - if is based on android 10 then will not boot. For a lot of aosp roms ts works, on PExp this doesnt works - as Ive wrote top of the thread.

I dont use aosp si i cant help you.
 

New_to_this1

New member
Jul 23, 2021
4
0
Hi @nalas, just wanted to let you know that I got the latest version of the kernel working on my N970F. All I did was change my rom to a different rom (HYPER ROM) and followed all the steps to the T. Everything seems to be working so far. Hopefully everything remains this way.
 

ykkfive

Inactive Recognized Developer
Jul 25, 2010
2,993
2,907
ykkfive.blogspot.com

hi nalas

sorry for bothering you but i have some questions for you. however you opted not to receive pm so i cant find a way to contact you except to quote you here.

can you please, perhaps drop me a pm for how to contact you? i wanna ask you something about the changes you made to this kernel (i am not a s10/note10 user so i dont want to hijack your thread here)

thank you very much
 

nalas

Senior Member
Nov 19, 2012
1,288
1,010
Poland
hi nalas

sorry for bothering you but i have some questions for you. however you opted not to receive pm so i cant find a way to contact you except to quote you here.

can you please, perhaps drop me a pm for how to contact you? i wanna ask you something about the changes you made to this kernel (i am not a s10/note10 user so i dont want to hijack your thread here)

thank you very much
Hi, write to me on telegram ts group - pm
 

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    DOWNLOADS and CHANGELOGS

    Changelogs:

    ThunderStorms-Kernel-R-v2.6 : 21.07.2021 - upstreamed to Linux 4.14.240 for OneUI3.x & AOSP R

    * Samsung source : FUE3/FUE6
    * Linux source : upstreamed to 4.14.240
    * Support for OneUI 3.x and AOSP R (some Roms - I don't have AOSP - for Your own risk - do kernel backup)
    * Samsung os patch level: 2021-07
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    * Added Sustanable Freq's support for big.Mid CPUs
    * Added Sustanable Freq for BIG/MID CPU - set at 1820/1898 MHz
    ****** ONLY BY fLASHING DTB/DTBO img ***********
    * Support Underclock for Little CPU to 130MHz
    * Support Underclock for GPU back to 100MHz (S10 series) and 156MHz (N10 series) in use
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support for OC frequencies for All CPU's to 1950/2400/2912 MHz
    * Unlocked OC/UC in kernel source for all CPU's
    * Disabled GPU Voltage Control in ThunderTweaks - doesn't work
    ********************************************************
    * Support FlatMem
    * CONFIG_HZ set at 100Hz
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support Battery Saver module
    * Support Sustanable Freq for BIG Core - 1820MHz
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 60/100
    - ZRAM set at 1.0GB for 8GB of RAM, swappiness set at 60
    - ZRAM set at 2.5GB for 6GB of RAM, swappiness set at 100
    * Added some Thermal and SCHED improvements
    * Disabled some debuggers
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.1.0.0
    * Magisk 23.0 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Clang 12.06 Google
    * Optimized for battery life
    * Support Battery_Saver module (turn off all boost)
    * Rest like in realease 2.5

    ThunderStorms-DTB/DTBO:
    * Samsung source : FUE3/FUE6
    * Linux source : 4.14.240
    * Some improvements
    * Rest like in release v2.5

    ThunderStorms-Kernel-R-v2.5 : 03.07.2021 - upstreamed to Linux 4.14.238 for OneUI3.x & AOSP R

    * Samsung source : FUCD/FUE3
    * Linux source : upstreamed to 4.14.238
    * Support for OneUI 3.x and AOSP R (some Roms - I don't have AOSP - for Your own risk - do kernel backup)
    * Samsung os patch level: 2021-05
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Added Fluid RT support : coverage_ratio, coverage_ratio_boost for each one cluster
    * Added CPU Governor : interactive - modded by @nalas (thx to MoRoGoKu for his port)
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    * Added Sustanable Freq for BIG CPU - set at 1820MHz
    ****** ONLY BY fLASHING DTB/DTBO img ***********
    * Support Underclock for Little CPU to 130MHz
    * Support Underclock for GPU back to 100MHz (S10 series) and 156MHz (N10 series) in use
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support for OC frequencies for All CPU's to 1950/2400/2912 MHz
    * Unlocked OC/UC in kernel source for all CPU's
    * Disabled GPU Voltage Control in ThunderTweaks - doesn't work
    ********************************************************
    * Support FlatMem
    * CONFIG_HZ set at 100Hz
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support Battery Saver module
    * Support Sustanable Freq for BIG Core - 1820MHz
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 60/100
    - ZRAM set at 1.0GB for 8GB of RAM, swappiness set at 60
    - ZRAM set at 2.5GB for 6GB of RAM, swappiness set at 100
    * Added some Thermal and SCHED improvements
    * Disabled some debuggers
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.9.0
    * Magisk 23.0 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Clang 12.05 Google
    * Optimized for battery life
    * Added support Battery_Saver module
    * Rest like in realease 2.4

    ThunderStorms-DTB/DTBO:
    * Samsung source : FUCD/FUE3
    * Linux source : 4.14.238
    * Some improvements
    * Added Fluid RT support : coverage_ratio, coverage_ratio_boost for each one cluster
    * Rest like in release v2.4


    ThunderStorms-Kernel-R-v2.4 : 16.06.2021 - upstreamed to Linux 4.14.236 for OneUI3.x & AOSP R

    * Samsung source : FUCD/FUE3
    * Linux source : upstreamed to 4.14.236
    * Support for OneUI 3.x and AOSP R (some Roms - I don't have AOSP - for Your own risk - do kernel backup)
    * Samsung os patch level: 2021-05
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    * Added Sustanable Freq for BIG CPU - set at 1820MHz
    ****** ONLY BY fLASHING DTB/DTBO img ***********
    * Support Underclock for Little CPU to 130MHz
    * Support Underclock for GPU back to 100MHz (S10 series) and 156MHz (N10 series) in use
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support for OC frequencies for All CPU's to 1950/2400/2912 MHz
    * Unlocked OC/UC in kernel source for all CPU's
    * Disabled GPU Voltage Control in ThunderTweaks - doesn't work
    ********************************************************
    * Support FlatMem
    * CONFIG_HZ set at 100Hz
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support Battery Saver module
    * Support Sustanable Freq for BIG Core - 1820MHz
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 60/100
    - ZRAM set at 1.0GB for 8GB of RAM, swappiness set at 60
    - ZRAM set at 2.5GB for 6GB of RAM, swappiness set at 100
    * Added some Thermal and SCHED improvements
    * Disabled some debuggers
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.9.0
    * Magisk 23.0 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Clang 11.05 Google
    * Optimized for battery life
    * Added support Battery_Saver module
    * Rest like in realease 2.3

    ThunderStorms-DTB/DTBO:
    * Samsung source : FUCD/FUE3
    * Linux source : 4.14.236
    * Some improvements
    * Rest like in release v2.3


    ThunderStorms-Kernel-R-v2.3 : 16.05.2021 - upstreamed to Linux 4.14.232 for OneUI3.x & AOSP R

    * Samsung source : FUBD/FUCD
    * Linux source : upstreamed to 4.14.232
    * Support for OneUI 3.x and AOSP R (some Roms - I don't have AOSP - for Your own risk - do kernel backup)
    * Samsung os patch level: 2021-05
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    * Added Sustanable Freq for BIG CPU - set at 1820MHz
    ****** ONLY BY fLASHING DTB/DTBO img ***********
    * Support Underclock for Little CPU to 130MHz
    * Support Underclock for GPU back to 100MHz (S10 series) and 156MHz (N10 series) in use
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support for OC frequencies for All CPU's to 1950/2400/2912 MHz
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    ********************************************************
    * Support FlatMem
    * CONFIG_HZ set at 200Hz
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support Battery Saver module
    * Support Sustanable Freq for BIG Core - 1820MHz
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Added some Thermal and SCHED improvements
    * Enabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Docker (thx to @tsao-chi)
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.8.0
    * Magisk 23.0 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Clang 11.05 Google
    * Optimized for battery life
    * Added support Battery_Saver module
    * Rest like in realease 2.2

    ThunderStorms-DTB/DTBO:
    * Samsung source : FUBD/FUCD
    * Linux source : 4.14.232
    * Some improvements
    * Rest like in release v2.2


    ThunderStorms-Kernel-R-v2.2 : 23.04.2021 - upstreamed to Linux 4.14.230 for OneUI3.x & AOSP R

    * Samsung source : FUBD/FUCD
    * Linux source : upstreamed to 4.14.230
    * Support for OneUI 3.x and AOSP R (some Roms - I don't have AOSP - for Your own risk - do kernel backup)
    * Samsung os patch level: 2021-01
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    ****** ONLY BY fLASHING DTB/DTBO img ***********
    * Support Underclock for Little CPU to 130MHz
    * Support Underclock for GPU back to 100MHz (S10 series) and 156MHz (N10 series) in use
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support for OC frequencies for All CPU's to 1950/2400/2912 MHz
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    ********************************************************
    * Support FlatMem
    * CONFIG_HZ set at 200Hz
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support Battery Saver module
    * Support Sustanable Freq for BIG Core - 1820MHz
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Disabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Docker (thx to @tsao-chi)
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.8.0
    * Magisk 22.1 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Cruel, Proton, Clang 11.05 Google
    * Optimized for battery life
    * Rest like in realease 2.1

    ThunderStorms-DTB/DTBO:
    * Samsung source : FUBD/FUCD
    * Linux source : 4.14.230
    * Some improvements
    * Rest like in release v2.1


    ThunderStorms-Kernel-R-v2.1 : 12.04.2021 - upstreamed to Linux 4.14.212 for OneUI3.x & AOSP R

    * Samsung source : FUBD/FUCD
    * Linux source : upstreamed to 4.14.212
    * Support for OneUI 3.x and AOSP R (some Roms - I don't have AOSP - for Your own risk - do kernel backup)
    * Samsung os patch level: 2021-01
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    ****** ONLY BY fLASHING DTB/DTBO img ***********
    * Support Underclock for Little CPU to 130MHz
    * Support Underclock for GPU back to 100MHz (S10 series) and 156MHz (N10 series) in use
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support for OC frequencies for All CPU's to 1950/2400/2912 MHz
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    ********************************************************
    * Support FlatMem
    * CONFIG_HZ set at 100Hz
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Disabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Docker (thx to @tsao-chi)
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.8.0
    * Magisk 22.1 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Cruel, Proton, Clang 11.05 Google
    * Optimized for battery life
    * Rest like in realease 2.0

    ThunderStorms-DTB/DTBO:
    * Samsung source : FUBD/FUCD
    * Linux source : 4.14.212
    * Rest like in release v2.0


    ThunderStorms-Kernel-R-v2.0 : 29.03.2021 - upstreamed to Linux 4.14.212

    * Samsung source : FUBD
    * Linux source : upstreamed to 4.14.212
    * Samsung os patch level: 2021-01
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    * Added BBR2 by Google TCP protocol
    * Support Underclock for Little CPU to 130MHz
    Only if DTB/DTBO img will be flashed - another TS zip file
    * Support Underclock for GPU back to 100MHz (S10 series) and 156MHz (N10 series) in use
    Only if DTB/DTBO img will be flashed
    * Support for lower frequencies in Mid CPU to 377 MHz
    Only if DTB/DTBO img will be flashed
    * Support for OC frequencies for All CPU's to 1950/2400/2912 MHz
    Only if DTB/DTBO img will be flashed
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    * Support FlatMem
    * CONFIG_HZ set at 50Hz
    * Removed Support Suspend Freq's for each CPU - max/min freq for screen off time
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Enabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.8.0
    * Magisk 22.1 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Cruel, Clang 11.05 Google
    * Optimized for battery life
    * Rest like in realease 1.9

    ThunderStorms-DTB/DTBO:
    * Samsung source : FUBD
    * Linux source : 4.14.212
    * Rest like in release v1.9


    ThunderStorms-Kernel-R-v1.9 : 25.02.2021 - again for all devices : F/N/B

    * Samsung source : EUA4
    * Linux source : backstreamed to 4.14.113
    * Samsung os patch level: 2021-01
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    * Added BBR2 by Google TCP protocol
    * Support Underclock for Little CPU to 130MHz
    Only if DTB/DTBO img will be flashed - another TS zip file
    * Support Underclock for GPU back to 100MHz (S10 series) and 156MHz (N10 series) in use
    Only if DTB/DTBO img will be flashed
    * Support for lower frequencies in Mid CPU to 377 MHz
    Only if DTB/DTBO img will be flashed
    * Support for OC frequencies for All CPU's to 1950/2400/2912 MHz
    Only if DTB/DTBO img will be flashed
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    * Support FlatMem
    * CONFIG_HZ set at 50Hz - on 25Hz was camera delays
    * Removed Support Suspend Freq's for each CPU - max/min freq for screen off time
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Enabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.8.0
    * Magisk 22.0 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Cruel, Proton, Samsung S20
    * Optimized for battery life
    * Rest like in realease 1.8

    ThunderStorms-DTB/DTBO:
    * Samsung source : EUA4
    * Linux source : 4.14.113
    * Rest like in release v1.8


    ThunderStorms-Kernel-R-v1.8 : 08.02.2021

    * Samsung source : EUA4
    * Linux source : backstreamed to 4.14.113
    * Samsung os patch level: 2021-01
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    * Added BBR2 by Google TCP protocol
    * Support Underclock for Little CPU to 130MHz
    Only if DTB/DTBO img will be flashed - another TS zip file
    * Support Underclock for GPU back to 100MHz - no more 156MHz in use
    Only if DTB/DTBO img will be flashed
    * Support for lower frequencies in Mid CPU to 377 MHz
    Only if DTB/DTBO img will be flashed
    * Support for OC frequencies for All CPU's to 1950/2400/3016 MHz
    Only if DTB/DTBO img will be flashed
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    * Added ThunderTweaks - 4 profiles
    * Support FlatMem
    * CONFIG_HZ set at 25Hz
    * Removed Support Suspend Freq's for each CPU - max/min freq for screen off time
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Enabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.7.5
    * Magisk 21.4 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Cruel
    * Optimized for battery life
    * Rest like in realease 1.7

    ThunderStorms-DTB/DTBO:
    * Samsung source : EUA4
    * Linux source : 4.14.113
    * Rest like in release v1.7


    ThunderStorms-Kernel-Q/R-v1.7 : 01.02.2021

    * Samsung source : ETLL/EUA4
    * Linux source : backstreamed to 4.14.113
    * Samsung os patch level: 2020-12
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Fingerprint Boost
    * Added BBR2 by Google TCP protocol
    * Support Underclock for Little CPU to 130MHz
    Only if DTB/DTBO img will be flashed - another TS zip file
    * Support Underclock for GPU back to 100MHz - no more 156MHz in use
    Only if DTB/DTBO img will be flashed
    * Support for lower frequencies in Mid CPU to 377 MHz
    Only if DTB/DTBO img will be flashed
    * Support for OC frequencies for All CPU's to 1950/2400/3016 MHz
    Only if DTB/DTBO img will be flashed
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    * Added ThunderTweaks - 4 profiles
    * Support FlatMem
    * CONFIG_HZ set at 25Hz
    * Removed Support Suspend Freq's for each CPU - max/min freq for screen off time
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Enabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.7.5
    * Magisk 21.4 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Cruel
    * Optimized for battery life
    * Rest like in realease 1.6

    ThunderStorms-DTB/DTBO:
    * Samsung source : ETLL/EUA4
    * Linux source : 4.14.113
    * Rest like in release v1.6


    ThunderStorms-Kernel-Q/R-v1.6 : 05.01.2021 / 18.01.2021

    * Samsung source : DTJ4/DTJA/ETLL
    * Linux source : backstreamed to 4.14.113
    * Samsung os patch level: 2020-11/12
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Added BBR2 by Google TCP protocol
    * Support Underclock for Little CPU to 130MHz
    Only if DTB/DTBO img will be flashed - another TS zip file
    * Support Underclock for GPU back to 100MHz - no more 156MHz in use
    Only if DTB/DTBO img will be flashed
    * Support for lower frequencies in Mid CPU to 377 MHz
    Only if DTB/DTBO img will be flashed
    * Support for OC frequencies for All CPU's to 1950/2400/3016 MHz
    Only if DTB/DTBO img will be flashed
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    * Added ThunderTweaks - 4 profiles
    * Support FlatMem
    * CONFIG_HZ set at 25Hz
    * Removed Support Suspend Freq's for each CPU - max/min freq for screen off time
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Enabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.7.3
    * Magisk 21.2 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Cruel
    * Optimized for battery life
    * Rest like in realease 1.5

    ThunderStorms-DTB/DTBO:
    * Samsung source : DTJ4/DTJA
    * Linux source : 4.14.113
    * Aroma :
    - added menu for backup Your exist dtb/dtbo
    - added menu for flash before backuped dtb/dtbs
    (this is for users which wants to make stock backup dtb)
    * Freqvar Tune - removed block edit up/down_rate_limit_us
    * Support for lower frequencies in Little CPU to 130 MHz
    * Support for lower frequencies in GPU back to 100 MHz - no more 156MHz in use
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support OC all CPU's to 1950/2400/3016 MHz
    * Optimized for GPU / CPU
    * Optimized for battery life
    * Rest like in release v1.5


    ThunderStorms-Kernel-Q-v1.5.1 : 28.12.2020

    * Samsung source : DTJ4/DTJA
    * Linux source : backstreamed to 4.14.113
    * Samsung os patch level: 2020-11
    * Added Device Tree Blobs into one Aroma Installer
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Added BBR2 by Google TCP protocol
    * Support Underclock for Little CPU to 187MHz
    Only if DTB/DTBO img will be flashed - another TS zip file
    * Support Underclock for GPU back to 156MHz
    Only if DTB/DTBO img will be flashed
    * Support for lower frequencies in Mid CPU to 377 MHz
    Only if DTB/DTBO img will be flashed
    * Support for OC frequencies for All CPU's to 2106/2400/3016 MHz
    Only if DTB/DTBO img will be flashed
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    * Added ThunderTweaks - 4 profiles
    * Support FlatMem
    * CONFIG_HZ set at 25Hz
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Enabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.7.2
    * Magisk 21.1 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Cruel and Proton
    * Optimized for battery life
    * Rest like in realease 1.4

    ThunderStorms-DTB/DTBO:
    * Samsung source : DTJ4/DTJA
    * Linux source : 4.14.113
    * Aroma :
    - added menu for backup Your exist dtb/dtbo
    - added menu for flash before backuped dtb/dtbs
    (this is for users which wants to make stock backup dtb)
    * Freqvar Tune - removed block edit up/down_rate_limit_us
    * Support for lower frequencies in Little CPU to 130 MHz
    * Support for lower frequencies in GPU back to 156 MHz
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support OC all CPU's to 2106/2400/3016 MHz
    * Optimized for GPU / CPU
    * Optimized for battery life
    * Rest like in release v1.4


    ThunderStorms-Kernel-Q-v1.4 : 18.12.2020

    * Samsung source : DTJ4/DTJA
    * Linux source : upstreamed to 4.14.133
    * Samsung os patch level: 2020-11
    * Removed Freqvar Tune - block edit time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Init.d scripts: /vendor/etc/init.d
    * Added app blocker : feravolt, FDE, NFS, LKT, Lspeed
    * Support Underclock for Little CPU to 130MHz (only with DBT/DTBO partitions flashed)
    * Support Underclock for GPU to 100MHz (only with DBT/DTBO partitions flashed)
    * Enabled by default WQ_POWER_EFFICIENT
    * Support FlatMem
    * Tick HZ set at 100Hz
    * Disabled some debuggers
    * Support Battery settings
    * Support Srandom x150 faster then Linux Urandom and 15x faster then Frandom
    * Disabled VNSwap and ZRAM - no sense use it for 8GB of RAM
    * Added Power Energy consumption tracking (in last_kmsg) from Linux 5.x
    * ThunderTweaks v1.0.7.2 (added Battery settings)
    * Added ThunderTweaks - 4 profiles
    * Battery settings: Store Mode, Charging Levels and Unstable Power Detection
    * Added Frandom support - is 10x faster then Linux Urandom
    * Magisk 21.1 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97 (GCC 10.2), Cruel (GCC 10.2) and Proton (Clang 12.0) toolchain
    * Optimized for battery life
    * Rest like in release 1.3

    ThunderStorms-DTB/DTBO-v1.4 : 18.12.2020
    * Samsung source : DTJ4/DTJA
    * Linux source : 4.14.133
    * Freqvar Tune - removed block edit up/down_rate_limit_us
    * Support for lower frequencies in Little CPU to 130 MHz
    * Support for lower frequencies in GPU back to 156 MHz
    * Optimized for GPU / CPU
    * Optimized for battery life
    * Rest like in release v1.3


    ThunderStorms-Kernel-Q-v1.3 : 01.12.2020

    * Samsung source : DTJ4/DTJA
    * Linux source : upstreamed to 4.14.133
    * Samsung os patch level: 2020-11
    * Added support for SM-G973N device
    * Removed Freqvar Tune - block edit time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Init.d scripts: /vendor/etc/init.d
    * Added app blocker : feravolt, FDE, NFS, LKT, Lspeed
    * Support Underclock for Little CPU to 130MHz (only with DBT/DTBO partitions flashed)
    * Support Underclock for GPU to 100MHz (only with DBT/DTBO partitions flashed)
    * Enabled by default WQ_POWER_EFFICIENT
    * Support FlatMem
    * Disabled some debuggers
    * Support Battery settings
    * Support Frandom x15 faster then Linux Urandom
    * Added Power Energy consumption tracking (in last_kmsg) from Linux 5.x
    * ThunderTweaks v1.0.7.2 (added Battery settings)
    * Added ThunderTweaks - 4 profiles
    * Battery settings: Store Mode, Charging Levels and Unstable Power Detection
    * Added Frandom support - is 10x faster then Linux Urandom
    * Magisk 21.1 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97 (GCC 10.2), Cruel (GCC 10.2) and Proton (Clang 12.0) toolchain
    * Optimized for battery life
    * Rest like in release 1.2

    ThunderStorms-DTB/DTBO-v1.3 : 01.12.2020
    * Samsung source : DTJ4/DTJA
    * Linux source : 4.14.133
    * Freqvar Tune - removed block edit up/down_rate_limit_us
    * Support for lower frequencies in Little CPU to 130 MHz
    * Support for lower frequencies in GPU to 100 MHz
    * Optimized for GPU / CPU
    * Optimized for battery life
    * Rest like in release v1.2


    ThunderStorms-Kernel-Q-v1.2 : 05.11.2020

    * Samsung source : DTI8
    * Samsung os patch level: 2020-09
    * Removed Freqvar Tune - block edit time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Init.d scripts: /vendor/etc/init.d
    * Added app blocker : feravolt, FDE, NFS, LKT, Lspeed
    * Support Underclock for Little CPU to 187MHz (only with DBT/DTBO partitions flashed)
    * ThunderTweaks v1.0.7.2 (added Battery settings)
    * Added ThunderTweaks - 4 profiles
    * Battery settings: Store Mode, Charging Levels and Unstable Power Detection
    * Added Frandom support - is 10x faster then Linux Urandom
    * Magisk 21.0 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Clang 6.0.1, Arter97 (Clang 10.2), Sasmung S20 (Clang 8.01) and Proton (Clang 9.0) toolchain
    * Optimized for battery life
    * Rest like in realease 1.1

    ThunderStorms-DTB/DTBO-v1.2 : 05.11.2020
    * Samsung source : DTI8
    * Linux source : 4.14.113
    * Freqvar Tune - removed block edit up/down_rate_limit_us
    * Support for lower frequencies in Little CPU to 187 MHz
    * Optimized for GPU / CPU
    * Optimized for battery life
    * Initial Release


    ThunderStorms-Kernel-Q-v1.1 : 15.09.2020

    * Samsung source : DTH7
    * Samsung os patch level: 2020-09
    * Removed Freqvar Tune - block edit time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Support Init.d scripts: /vendor/etc/init.d
    * Added app blocker : feravolt, FDE, NFS, LKT, Lspeed
    * ThunderTweaks v1.0.6.0
    * Magisk 20.4 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Clang 6.0.1, arter97 and proton toolchain
    * Optimized for battery life
    * Rest like in realease 1.0


    ThunderStorms-Kernel-Q-v1.0 : 28.08.2020

    * Samsung source : CTG4 - thx to CruelKernel Team
    * Linux source : 4.14.113 - thx to CruelKernel Team
    * Removed Freqvar Tune - block edit time_rate by user
    * Optimizations in Linux source
    * Powersuspend drivers updated to v2.0
    * Gentle Fair Sleepers support
    * Added Adaptative Fast Charge
    * Added Fsync Control toggle
    * Added Morosound v2.1.1 - thx to Moro
    * Added a lot of TCP/IP algorythms
    * Added a lot of I/O schedulers
    * Added standard Wakelocks support
    * Added Boeffla v1.1.0 Wakelocks Blocker support
    * Added CPU govs: Blu_Schedutil
    * Added editable by user up/down rate-limit in Schedutil
    * Support F2FS, CIFS and NTFS (R/W)
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.6.0
    * Magisk 20.4 Offcial build in kernel - thx to CruelKernel Team
    * Optimized for battery life
    * Initial Release

    _________________________________________________

    DOWNLOAD:
    ThundeRStorms AiO all releases - Link
    _________________________________________________
    3
    ThundeRStormS Galaxy S10/N10 Exynos family for OneUI Q/R & AOSP R
    SM-G970F/N, SM-G973F/N, SM-G975F/N, SM-G977B/N
    SM-N970F, SM-N971N, SM-N975F, SM-N976N, SM-N976B


    Compatibility notes :
    Only for Android OneUI Q odexed and deodexed roms S10/N10 Exynos family ROMs
    AOSP is supported - PIXEL EXP and crDroid doesn't work !!!


    Kernel features:
    * Samsung source : FUE3/FUE6
    * Samsung os date patch : 2021-07
    * Linux source : backstreamed to 4.14.240
    * Support for OneUI 3.x and AOSP R (some Roms - I don't have AOSP - for Your own risk - do kernel backup)
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Device Tree Blobs in one Aroma installer
    * Removed Freqvar Tune - block edit time_rate by user
    * App blocker : blocked LKT, Lspeed, NFS, FDE, Ferravolt (You can get restart the phone if You use this apps)
    * Optimizations in Linux source
    * Sched/CPU Governors : modded schedutil by @nalas (schedutil_ts), ondemand, interactive
    * Powersuspend drivers updated to v2.0
    * Gentle Fair Sleepers support
    * Adaptative Fast Charge
    * Fsync Control toggle
    * Mass Storage support
    * Morosound v2.1.1 - thx to Moro
    * Added a lot of TCP/IP algorythms
    * Added a lot of I/O schedulers
    * Added standard Wakelocks support
    * Added Sustanable Freq's support for big.Mid CPUs
    * Support GPU Voltage Control
    * Added Boeffla v1.1.0 Wakelocks Blocker support
    * Added CPU govs: Blu_Schedutil, Ondemand, TS_Schedutil
    * Added editable by user up/down rate-limit in TS_Schedutil
    * Battery settings: Store Mode, Charging Levels and Unstable Power Detection
    * Added Power Energy consumption tracking (in last_kmsg) from Linux 5.x
    * Added Sustanable Freq for BIG CPU - set at 1820MHz
    * Support FlatMem
    * Support Frandom x15 faster then Linux Urandom - disabled bcose Srandom is enabled
    * Support Srandom x150 faster then Linux Urandom
    * Removed Support Suspend Freq's for each CPU - max/min freq for screen off time
    * Support turn on/off DVFS for GPU
    * Support CONFIG_HZ to 25Hz, 50Hz, 100Hz, 250Hz, 200Hz, 300Hz, 1000Hz - set at 100HZ
    * Enabled VNSwap and ZRAM - 1Gb for 8GB and 2.5GB for 6GB of RAM devices
    * Support F2FS, CIFS and NTFS (R/W)
    * Support Fingerprint Boost
    * Support Battery Saver module
    * Support Sustanable Freq for BIG Core - 1820MHz
    * Support Frandom (10x faster then Linux Urandom)
    ****** ONLY BY fLASHING DTB/DTBO img ***********
    * Device Tree Blobs support (dtb and dtbo) [Underclock Littel CPU to 130MHz, disable Freqvar up/down_limit_rate_us - user can edit it in ts_schedutil settings, CPU/GPU optimizations)
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support for OC frequencies for All CPU's to 2106/2400/3016 MHz
    * Support Underclock for GPU to 100MHz (only with DBT/DTBO partitions flashed)
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU undervolt and throttling settings
    ********************************************************
    * Support Battery settings : Charging Level, Store Mode, Unstable Power Detection
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.8.0
    * Magisk 22.1 Offcial build in kernel - thx to CruelKernel Team
    * Optimized for battery life
    * Compiled via GCC 6.0.1, GCC 8.0.1 (Samsung S20), GCC 10.2 (Arter97 & Cruel) and Clang 12.0 (Proton) toolchain
    * Kernel use an AROMA installer to help guide you through the installation.

    TOOLCHAINS: Arter97 and Cruel - breaks WIndows 10 assistant app connection - QR camera doesn't work.

    Recommended Apps:
    To tweak most of the settings in the kernel, I recommend using ThunderTweaks app.
    _________________________________________________

    IMPORTANT INFORMATIONS:
    1. WARNING: YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
    2. YOUR WARRANTY CAN BE VOID.
    "I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
    Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point
    the finger at me for messing up your device, You can't blame me for this fact."

    3. NO REQUESTS!!!

    _________________________________________________

    INSTALLATION PROCESS:

    FOR STOCK ODEX/DEODEX ROMS - read carefully
    • FIRST - Clear cache apps like Kernel Adiutor or MTweaks or another one in system app menager !!!
    • Backup EFS, DTB, DTBO, DATA and KERNEL as always in TWRP !!!
    • Download the latest kernel version zip file
    • Use only not patched (magisk) recovery - kernel has magisk build-in
    • Flash the CLEAN ROM, next restore Your DATA and flash the kernel zip with root or not
    • Choose aroma selection | If You don't know what Device Tree Blobs are and how to use it so don't flash it - You can brick Your phone !!!
    • If You have fingerprint patter problem pls use link from CruelKernel for patch img file for another date. Link
    • Reboot
    • ThunderTweaks app is copied to Your sdcard/ThunderTweaks folder. You can install it manually.

    PROBLEMS / BUGS:
    No f2fs partition support - Kernel support this kind of system files, if You can't get acces to this so look ROM you are using support f2fs or not.
    You can look into fstab.exynos9825 file located in /vendor/etc/ folder.
    If in line with DATA partition is only ext4 - so means ROM not support f2fs.
    -------------------------------
    Device Tree Blobs will be present on all another kernels (are in dtb/dtbo partition so flashing only boot.img not helps) - so if You want to change it for stock or another kernel You have to flash this partitions via ODIN or TWRP.
    If You have no frequencies lower then stock so You have not flashed modified DTB/DTBO partitions !!!
    -------------------------------

    Make F2FS working:
    - Make backup You fstab file first : /vendor/etc/fstab.exynos9820
    - Edit Your fstab file by add this two lines:
    /dev/block/platform/13d60000.ufs/by-name/cache /cache f2fs rw,nosuid,nodev,noatime,inline_xattr,flush_merge,nobarrier wait,check,formattable - makes bootloop
    /dev/block/platform/13d60000.ufs/by-name/userdata /data f2fs noatime,nosuid,nodev,discard,usrquota,grpquota,fsync_mode=nobarrier wait,check,quota
    - or rename this file (View attachment fstab.exynos9825.txt) to fstab.exynos9820 and copy via TWRP to system_root/vendor/etc/ folder and set permissiont by chmod to 0644 and reboot the phone.
    - F2FS is full support now.

    Back to stock/previouse Device Tree Blobs:
    1) ODIN
    - Unpack dtb.img.lz4 and dtbo.img.lz4 from Your latest stock frimware AP....md5
    - Pack this two files to dtb.tar archive file
    - Run latest Odin and Unset Auto Reboot, add dtb.tar to AP section, add Home_CSC to CSC section, next connect Your device in Dwonload Mode, Flash
    - Reboot.
    2) Flashable TWRP
    - use flashable zip file from another kernel - flash via TWRP
    - You can make dtb/dtbo as a flashable zip file and flash it via TWRP | for flash use :
    dd if=/tmp/your_name_folder/dtb.img of=/dev/block/platform/13d60000.ufs/by-name/dtb bs=4096
    dd if=/tmp/your_name_folder/dtbo.img of=/dev/block/platform/13d60000.ufs/by-name/dtbo bs=4096

    Thanks for reports.
    _________________________________________________

    CREDITS :
    - The Linux Kernel Archive for the Linux Patches https://www.kernel.org/
    - Samsung Open Source Release Center for the Source code http://opensource.samsung.com/
    - @osm0sis for Android Image Kitchen and anykernel2 https://forum.xda-developers.com/showthread.php?t=2073775
    - Magisk and SuperSu Team for root method
    - @evdenis Denis Efremov and Cruel Team for source, Samsung updates and help.
    - MoRoGoKu, Anan1211, Pascua28, Corsicanu
    - Ambasadii
    - @TheMadScientist, @bartolomeo10, @touseef77, @okij, @tin2404 and tester group.
    _________________________________________________

    SOURCE of the kernel:
    GitHub:
    https://github.com/ThunderStorms21th/Galaxy-S10
    _________________________________________________

    Contributors:
    @nalas
    ThundeRStormS Team
    _________________________________________________

    DISCUSSION:
    Telegram Group:
    Link
    Telegram News Channel:
    Link
    _________________________________________________

    Version Information:
    Statsus : Stable
    Current version : AiO v2.6 (All in One)
    Release Date : 2021-07-21

    _________________________________________________
    DONATION:
    If you liked my work, you can collaborate by giving thanks and with some donation to continue working hard.
    Thank you very much to all.
    DONATION

    _________________________________________________
    CHANGELOGS & DOWNLOADS in 2nd post
    _________________________________________________
    2
    1
    Awesome work mate. Great setup
    1
    Changelogs:

    ThunderStorms-Kernel-Q-v1.6 : 05.01.2021

    * Samsung source : DTJ4/DTJA
    * Linux source : backstreamed to 4.14.113
    * Samsung os patch level: 2020-11
    * Added Device Tree Blobs into one Aroma Installer
    * Added auto OS_Patch Date - no needed patching boot.img no more, thx to CruelKernel team
    * Disabled Freqvar Tune - but unblocked time_rate by user
    * Optimizations in Linux source
    * Support CIFS and NTFS
    * Added BBR2 by Google TCP protocol
    * Support Underclock for Little CPU to 130MHz
    Only if DTB/DTBO img will be flashed - another TS zip file
    * Support Underclock for GPU back to 100MHz - no more 156MHz in use
    Only if DTB/DTBO img will be flashed
    * Support for lower frequencies in Mid CPU to 377 MHz
    Only if DTB/DTBO img will be flashed
    * Support for OC frequencies for All CPU's to 1950/2400/3016 MHz
    Only if DTB/DTBO img will be flashed
    * Unlocked OC/UC in kernel source for all CPU's
    * Support GPU Voltage Control
    * Added ThunderTweaks - 4 profiles
    * Support FlatMem
    * CONFIG_HZ set at 25Hz
    * Support Suspend Freq's for each CPU - max/min freq for screen off time
    * Support GPU undervolt and throttling settings
    * Support turn on/off DVFS for GPU
    * Support SRANDOM x150 faster then Linux Urandom
    * Added back VNSwap and ZRAM - swappiness set at 0
    - no sense use ZRAM for 8GB of RAM
    - You can add ZRAM back via set swappiness another then 0
    * Enabled by default WQ_POWER_EFFICIENT
    * Disabled some debuggers
    * Support Battery settings
    * Support Init.d scripts: /vendor/etc/init.d
    * ThunderTweaks v1.0.7.3
    * Magisk 21.2 Offcial build in kernel - thx to CruelKernel Team
    * Compiled via Arter97, Cruel
    * Optimized for battery life
    * Rest like in realease 1.5

    ThunderStorms-DTB/DTBO:
    * Samsung source : DTJ4/DTJA
    * Linux source : 4.14.113
    * Aroma :
    - added menu for backup Your exist dtb/dtbo
    - added menu for flash before backuped dtb/dtbs
    (this is for users which wants to make stock backup dtb)
    * Freqvar Tune - removed block edit up/down_rate_limit_us
    * Support for lower frequencies in Little CPU to 130 MHz
    * Support for lower frequencies in GPU back to 100 MHz - no more 156MHz in use
    * Support for lower frequencies in Mid CPU to 377 MHz
    * Support OC all CPU's to 1950/2400/3016 MHz
    * Optimized for GPU / CPU
    * Optimized for battery life
    * Rest like in release v1.5