[KERNEL]ThundeRStormS Kernel[Samsung Galaxy S7 flat/edge][O/P/T/A]

Search This thread

nalas

Senior Member
Nov 19, 2012
1,216
928
Poland
ThundeRStormS "Galaxy S7/S7edge (SM-G930/935 F/FD) TW Oreo, OneUI Pie and Q, Treble and AOSP kernel"

Compatibility notes :
Android TW OREO, OneUI PIE and Q, TREBLE, AOSP RELEASE odexed and deodexed roms
S7 ROMs - G930/G935 F/FD
'I don't use any ported rom so I can't check it'

(If You want to install ported roms - pls uncheck Priv fix for stock Roms in installation process and select fix for deodexed and ported roms and look at Installation section in OP)

The kernel use an AROMA installer to help guide you through the installation.


Recommended Apps:
To tweak most of the settings in the kernel, I recommend using ThunderTweaks app.
_________________________________________________

IMPORTANT INFORMATIONS:
1. WARNING: YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
2. YOUR WARRANTY CAN BE VOID.
"I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point
the finger at me for messing up your device, You can't blame me for this fact."

3. NO REQUESTS!!!

_________________________________________________

KERNEL FEATURES:
- based on stock Samsung kernel N935KKKU4CSK1
- based on latest source ||3.18.91||
- Flat and Edge support
- Odexed / Deodexed Roms
- Oreo, Pie, Treble and AOSP Roms
- Aroma installer
- init.d support
- lot of CPU governors
- Conservative governor editable (now You can edit governors values)
- lower than stock's values for big and little CPUs frequencies to 208/130 MHz
- lower than stock's values for GPU frequencies to 112MHz
- lot of I/O schedulers
- TCP : cubic, htcp, reno, bic, westwood, vegas, veno, lia, olia, wvegas
- SELinux status to permissive/enforcing
- disasbled DM-Verity, Knox, RKP, Tima, Rooting Restriction
- Magisk, ThunderTweaks
- Spectrum support
- Low Memory Killer Deamon support , LMK is disabled
- ArchPower
- PWM Flicker Free
- CPU voltage control
- standard wakelocks
- Boeffla wakelock control
- Battery settings controls
- ABS clock fixed to 64bit
- GPU Thermal Throttling
- GPU voltage control
- GPU OC to 806 MHz
- F2FS, CIFS and NFS files support
- Fsync control and CRC
- Dynamic Fsync
- Gentle Sleepers support
- Wireguard VPN support
- Moro Sound Drivers
- Support for Low Memory Killer Deamon
- Disabled old Low Memory Killer
- LED controls
- Support 10 Spectrum Profiles with ThundeRStormS profiles
- ThunderStrom CPU governor based on Interactive with new editable feature
- Gestures Wakeup controls
- Support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster, Thunderbolt, Lazy, Fast, MSM - first kernel with this features
..MTweaks do not support all features of hotplugs so all settings are not available to change
..You can do it via file browser and change values in sys files of this module - some parts.
- VNSwap default is turned ON | If You want it OFF, select in Aroma Installer.
- ZRAM max file is changed to 4,0GB but default is turned OFF | disk space for ZRAM is editable.
- Input Boost drivers and control for CPU each core | first kernel with this feature for S7 TW
- Input Boost for CPU | for Little.big clusters first kernel with this feature for S7 TW
- Fingerprint Boost | first kernel with this feature for S7 TW
- this kernel is not for people who want to get big bentchmark scores, OC, etc.
- this kernel is for daily use for better battery life with good balanced work

What is not included:
- no OC for CPU
- no synapse support
_________________________________________________

INSTALLATION PROCESS:

FOR STOCK ODEX/DEODEX, Treble and AOSP ROMS

  • FIRST - Clear cache apps like Kernel Adiutor or MTweaks or another one in system app menager !!!
  • Backup EFS, DATA and KERNEL as always in TWRP !!!
  • Download the latest kernel version zip file
  • Go to recovery
  • Flash the CLEAN ROM, next restore Your DATA and flash the kernel zip with root or not
  • Choose aroma selection
  • Flash Magisk separately or with Aroma installer
  • Reboot
  • ThunderTweaks app is installed.

If You wnat to flash this kernel and have installed another custom kernel like MoRoKernel or Arianoxx, You have to clear ThunderTweaks, MTweaks or Kernel Adiutor cache before You install.
If You dont want one of the possibilities for root inside Aroma Installer please choose no root and next flash any root mods manually.

PROBLEMS / BUGS:

Thanks for reports.
_________________________________________________

CREDITS AND THANKS:
- The Linux Kernel Archive for the Linux Patches https://www.kernel.org/
- Samsung Open Source Release Center for the Source code http://opensource.samsung.com/
- Project: Exynos-Linux-Stable for updated ELS Linux source codes https://github.com/exynos-linux-stable
- @morogoku and @francitato02 for his help and explanation of the compile and configure kernel processing, codes and commits
- @djb77 for his help and explanation of the compile and configure kernel processing, codes and commits
- @Tkkg1994, @francitato02, @Noxxxious, @farovitus, and @mwilky for help, codes and commits
- @osm0sis for Android Image Kitchen and anykernel2 https://forum.xda-developers.com/showthread.php?t=2073775
- Magisk and SuperSu Team for root method
- @ModX81 for new base of ramdisk, CP and BL from Samsung
- Tester : @wille95, @youpeero, @TheesKyr, @cenelyanto, @Franz S., @phghost, @insanowsky, @Shariq3422, @UsmaniMustafa, @trankill, @rtakak, @shah22, HambaAllah
- Tester, idea & support : @matt_988, @Kyo-Ito
- Thanks to @noid - for fixing auto installation of ThunderTweaks and many other things
_________________________________________________

SOURCE of the kernel:
GitHub:
https://github.com/ThunderStorms21th/S7-Linux-3.18.140
GitHub: https://github.com/ThunderStorms21th/S7-Linux-3.18.140-EAS
_________________________________________________

Contributors:
@nalas, @callidus_ex_de_latebros, @VHFG22, @tetsuo55
ThundeRStormS Team
_________________________________________________

DISCUSSION:
Telegram Group:
Link
Telegram News Channel:
Link
_________________________________________________

Version Information:
Statsus : Stable
Current version : Aio v4.3
Release Date : 2021-01-19


--------------------------------------------------------------------------------
DONATION:
If you liked my work, you can collaborate by giving thanks and with some donation to continue working hard.
Thank you very much to all.
DONATION

CHANGELOGS & DOWNLOADS in 2nd post
 
Last edited:

nalas

Senior Member
Nov 19, 2012
1,216
928
Poland
CHANGELOGS and DOWNLOADS

CHANGELOGS:

Version AiO v1.2
  • ROM OREO, PIE, TREBLE and AOSP support
  • Releases OREO(v2.6), PIE(v2.3), TREBLE-Q(v1.0), TREBLE-OneUI-Q (v1.0), AOSP-PIE(v1.2) and AOSP-Q(v1.0)
  • Samsung sources N935KKKU4CSK1
  • ThunderTweaks 1.0.4.0 | adaptaded to ThundeRStormS kernels |
  • Linux updated to 3.18.91
  • Compiler : aarch64-linux-android-4.9
  • Powersuspend updated to v1.9
  • Improvements in kernel source : crypto, f2fs, cfq, block, bfq, adb, mtp, mm, fs, RCU, HZ, hibernation, suspend, cpufreq and linux
  • Support LMK, LMK Deamon is disabled (not works properly)
  • F2FS Support
  • Possibly Fixed drain battery and some improvements
  • Magisk 20.1 | Magisk 20.2 phh for Q
  • Rest like in AiO v1.1
--------------------------------------------------------------------------------
Version AiO v1.1
  • ROM OREO, PIE, TREBLE and AOSP support
  • Busybox removed to fix Root check for secured apps
  • Releases OREO(v2.5), PIE(v2.2), TREBLE(v1.1) and AOSP(v1.1)
  • Samsung sources S5CSF1
  • Samsung ramdisk S5CSF1
  • ThunderTweaks 1.0.3.4 | adaptaded to ThundeRStormS kernels |
  • Linux updated to 3.18.140
  • Compiler : aarch64-linux-android-4.9
  • Iris service disabled
  • GPU for Pie, Treble R28 PIE drivers and for Oreo & AOSP R22 Oreo drivers
  • Improvements in kernel source : crypto, f2fs, cfq, block, bfq, adb, mtp, mm, fs, RCU, HZ and linux
  • Support LMK, LMK Deamon is disabled (not works properly)
  • F2FS, CIFS, NFS Support
  • Possibly Fixed drain battery and some improvements
  • Magisk 19.4 Official for all OS
  • Rest like in AiO v1.0
Version AiO v1.0
  • ROM OREO, PIE, TREBLE and AOSP support
  • Releases OREO(v2.4), PIE(v2.1), TREBLE(v1.0) and AOSP(v1.0)
  • Samsung sources S5CSF1
  • Samsung ramdisk S5CSF1
  • ThunderTweaks 1.0.3.3 | adaptaded to ThundeRStormS kernels |
  • Magisk 19.4/19.3 in Oreo
  • Linux updated to 3.18.140
  • Compiler : aarch64-linux-android-4.9
  • Iris service disabled
  • GPU for Pie, Treble R28 PIE drivers and for Oreo & AOSP R22 Oreo drivers
  • Some CPU governors are updated : new MinMax & Userspace
  • Support LMK Deamon, LMK is disabled
  • Early SF Fixed
  • F2FS, CIFS, NFS Support
  • Improvements for IRQ PM suspend mode
  • Possibly Fixed drain battery and some improvements
  • New Aroma theme and improvements
  • Rest like eariel releases
Version v2.0
  • ROM PIE NFE and N8 support
  • Samsung sources S5CSF1
  • Samsung ramdisk S5CSF1
  • ThunderTweaks 1.0.3.2 | adaptaded to ThundeRStormS kernels |
  • Flat and Edge now supported
  • Magisk 19.4
  • Linux updated to 3.18.140
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Iris service disabled
  • Updated 10 Spectrum Profiles
  • GPU R28 PIE drivers only
  • Some CPU governors are updated : new MinMax & Userspace
  • Wireguard VPN supported
  • Gestures Wakeup supported
  • Added full support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, ClusterPlug, ThunderPlug
  • ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
  • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
  • Fingerprint Boost support - default turned OFF.
  • Added Input Boost for big.LITTLE clusters for each core
  • Possibly Fixed drain battery and some improvements
  • SELinux Permissive
  • New Aroma theme and improvements
Version v1.9
  • ROM PIE NFE and N8 support
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • ThunderTweaks 1.0.3.1 | adaptaded to ThundeRStormS kernels |
  • Flat and Edge now supported
  • Magisk 19.4
  • REMOVED : TWRP 3.3.0-0 fixed by AJ's
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools Fix - thx to MoroGoku
  • Camera Fix - now SONY/SAMSUNG works
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
  • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Iris service disabled
  • Support now 10 Spectrum Profiles with NEW ThundeRSTormS profiles
  • Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
  • Added TTL support for IP
  • Bluetooth OREO drivers
  • GPU R28 PIE drivers only
  • REMOVED GPU LIBS for Oreo and PIE | now rom's libs will be used.
  • Added new I/O scheds : Anxiety and Maple
  • Some CPU governors are updated
  • Wireguard VPN supported
  • Gestures Wakeup supported
  • Added SSP sensor battery drain
  • Added full support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, ClusterPlug, ThunderPlug
  • ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
  • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
  • Fingerprint Boost support - default turned OFF.
  • Added Input Boost for big.LITTLE clusters.
  • Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
  • ZSWAP RAM Pool set max from 50 to 60%
  • Some source fixes
  • Added NEBULA CPU gov
  • Possibly Fixed drain battery and some improvements
  • SELinux Permissive
Version v1.8
  • ROM PIE NFE and N8 support
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • ThunderTweaks 1.0.1 | adaptaded to ThundeRStormS kernels |
  • Flat and Edge now supported
  • Magisk 19.3 back again
  • TWRP 3.3.0-0 fixed by AJ's
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools Fix - thx to MoroGoku
  • Camera Fix - now SONY/SAMSUNG works
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
  • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Iris service disabled
  • Support now 10 Spectrum Profiles with NEW ThundeRSTormS profiles
  • Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
  • Added TTL support for IP
  • Bluetooth OREO drivers
  • Added new I/O scheds : Anxiety and Maple
  • Some CPU governors are updated
  • Wireguard VPN supported
  • Gestures Wakeup supported
  • Added SSP sensor battery drain
  • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster
  • ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
  • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
  • Fingerprint Boost support - default turned OFF.
  • Added Input Boost for big.LITTLE clusters.
  • Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
  • ZSWAP RAM Pool set max from 50 to 60%
  • Possibly Fixed drain battery
  • SELinux Permissive
Version v1.7
  • ROM PIE NFE and N8 support
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • ThunderTweaks 1.0.0 | adaptaded to ThundeRStormS kernels |
  • Flat and Edge now supported
  • Magisk 19.0 back again
  • TWRP 3.3.0-0 fixed by AJ's
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools Fix - thx to MoroGoku
  • Camera Fix - now SONY/SAMSUNG works
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
  • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Iris service disabled
  • Support now 5 Spectrum Profiles with NEW ThundeRSTormS profile
  • Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
  • Added TTL support for IP
  • Added new I/O scheds : Anxiety and Maple
  • Some CPU governors are updated
  • Wireguard VPN supported
  • Gestures Wakeup supported
  • Added SSP sensor battery drain
  • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster | MTweaks don't support some settings yet but will be in the future - thx to Moro.
  • ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
  • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
  • Fingerprint Boost support - default turned OFF | MTweaks don't support toggle yet.
  • Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
  • ZSWAP RAM Pool set max from 50 to 60%
  • Possibly Fixed drain battery
  • SELinux Permissive
Version v1.6
  • ROM PIE NFE and N8 support
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • MTweaks 2.14.0 | fixed installation
  • Flat and Edge now supported
  • Magisk 19.0 back again
  • TWRP 3.3.0-0 fixed by AJ's
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools Fix - thx to MoroGoku
  • Camera Fix - now SONY/SAMSUNG works
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
  • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Iris service disabled
  • Added TTL support for IP
  • Added new I/O scheds : Anxiety and Maple
  • Some CPU governors are updated
  • Wireguard VPN supported
  • Gestures Wakeup supported
  • Added SSP sensor battery drain
  • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster | MTweaks don't support some settings yet but will be in the future - thx to Moro.
  • ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
  • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
  • Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
  • Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
  • ZSWAP RAM Pool set max from 50 to 60%
  • Possibly Fixed drain battery
  • SELinux Permissive
Version v1.5
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • MTweaks 2.14.0 | fixed installation
  • Flat and Edge now supported
  • Magisk 19.0 back again
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools Fix - thx to MoroGoku
  • Camera Fix - now SONY/SAMSUNG works
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
  • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Iris service disabled
  • Added TTL support for IP
  • Added new I/O scheds : Anxiety and Maple
  • Some CPU governors are updated
  • Wireguard VPN supported
  • Gestures Wakeup supported
  • Added SSP sensor battery drain
  • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP | MTweaks don't support some settings yet but will be in the future - thx to Moro.
  • ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
  • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
  • Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
  • Possibly Fixed drain battery
  • SELinux Permissive
  • Rest like in TS-PIE v1.4
Version v1.4
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • MTweaks 2.14.0 | fixed installation
  • Flat and Edge now supported
  • Magisk 19.0 back again
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools Fix - thx to MoroGoku
  • Camera Fix - now SONY/SAMSUNG works
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
  • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Iris service disabled
  • Wireguard VPN supported
  • Gestures Wakeup supported
  • Added SSP sensor battery drain
  • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP | MTweaks don't support some settings yet but will be in the future - thx to Moro.
  • ZRAM max files set at 2,5GB - default OFF
  • VNSwap truned OFF by default | If You want to turn it ON You have to delete TS script from Init.d folder
  • Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
  • Possibly Fixed drain battery
  • SELinux Permissive
  • Rest like in TS-PIE v1.3
Version v1.3
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • MTweaks 2.14.0 | fixed installation
  • Flat and Edge now supported
  • Magisk 19.0 back again
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools Fix - thx to MoroGoku
  • Camera Fix - now SONY/SAMSUNG works
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
  • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Iris service disabled
  • Wireguard VPN supported
  • Gestures Wakeup supported
  • Added SSP sensor battery drain
  • Possibly Fixed drain battery
  • SELinux Permissive
  • Rest like in TS-PIE v1.2
Version v1.2
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • MTweaks 2.14.0 | fixed installation
  • Removed Smartpack-Kernel Manager v7.5
  • Flat and Edge now supported
  • Magisk 19.0 back again
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools Fix - thx to MoroGoku
  • Camera Fix - now SONY/SAMSUNG works
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
  • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Wireguard VPN supported
  • Added SSP sensor battery drain
  • Possibly Fixed drain battery
  • SELinux Permissive
  • Rest like in TS-PIE v1.1
Version v1.1
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • MTweaks 2.14.0
  • Smartpack-Kernel Manager v7.5
  • Flat and Edge now supported
  • Magisk 18.1 | System files and folders now are visible - problem of Magisk 19.0
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools fix - thx to MoroGoku
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Wireguard VPN supported
  • Added SSP sensor battery drain
  • Possibly Fixed drain battery
  • SELinux Permissive
  • Rest like in TS-PIE v1.0.1
Version v1.0.1
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • MTweaks 2.14.0
  • Smartpack-Kernel Manager v7.5
  • Flat and Edge now supported
  • Magisk 18.1 | now System files are visible - problem of Magisk 19.0
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Game Tools fix - thx to MoroGoku
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
  • Fixed ABS clock to 64bit
  • Fixed some SCSI drivers
  • Added ArchPower support
  • Added Dynamic Fsync and Gentle Sleepers support
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Wireguard VPN supported
  • Possibly Fixed drain battery
  • SELinux Permissive
  • Rest like in TS-PIE v1.0
Version v1.0
  • Samsung sources U4CSC4
  • Samsung ramdisk U4CSC4
  • MTweaks 2.13.5
  • Smartpack-Kernel Manager v7.5
  • Flat and Edge now supported
  • Magisk 19.0
  • Knox 0x0 & SafetyNet with SuperSU and Magisk
  • SuperSU 2.82SR5 + SuHide v1.09
  • Linux 3.18.91 Samsung source
  • Unlocked big CPU 4 cores to 2600MHz
  • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
  • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
  • GPU Freq: 112-806MHz Stock
  • Added GPU Throttling
  • Added CPU and GPU voltage control
  • Added GPU OC to 806MHz
  • Added Fsync - default turn off
  • Added CRC - default turn off
  • Added standard wakelocks
  • Added Boeflla wakelocks
  • Added Battery Store and settings control
  • Fixed ABS clock to 64bit
  • Compiler : aarch64-linux-android-4.9
  • Spectrum and profiles supported
  • Wireguard VPN supported
  • Possibly Fixed drain battery
  • Some CPU governors
  • Lot of I/O Shedulers
  • HMP settings : 760/240 and some freq chcnages
  • USB charge to 700MHz in normall mode
  • USB charge to 900MHz in fast mode
  • Added VENO, VEGAS to TCP, etc.
  • Lot of CPU governors
  • Added PWM Flicker Free - default turn off
  • Moro Sound Drivers
  • Led controls
  • SELinux Permissive
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

DOWNLOADS:
ThundeRStormS kernel AiO v1.2 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel AiO v1.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel AiO v1.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v2.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.9 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.8 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.7 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.6 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.5 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.4 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.3 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.2 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.0.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
ThundeRStormS kernel v1.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
 
Last edited:

nalas

Senior Member
Nov 19, 2012
1,216
928
Poland
ThunderTweaks

ThunderTweaks is an app based on Kernel Adiutor Willi Ye next modded by MoRoGoKu (MTweaks) and Corsicanu (hKTweaks).

Big thx for them.

ThunderTweaks v1.0.4.0 for TS kernel AiO v1.0 to v1.2 :
- more features in HMP section,
- added Sultan's CPU Input Boost (if kernel supports),
- added DevFreq Boost support (if kernel supports),
- support for Powersuspend v1.9,
- more features in Samsung hotplug section,
- some improvments and fixes.

ThunderTweaks v1.0.3.3 for TS kernel v1.9 & 2.0 and AiO v1.0 :
- based on ThunderTweaks v1.0.3.2
- Support Apply on Boot delay max to 150 sec
- Support load spectrum for some devices
- Support for Adaptative Fats Charge (in Battery settings)
- some improvments and fixes

ThunderTweaks v1.0.3.2 for TS kernel v1.9 & 2.0 :
- based on ThunderTweaks v1.0.3.1
- Support undervolting to -200mV for big and little CPUs
- Support step of undervolting to 6.25mV
- some improvments and fixes

ThunderTweaks v1.0.3.1 for TS kernel v1.9 :
- based on ThunderTweaks v1.0.3
- added new ThundeRStormS Spectrum Profiles and support now 10 spectrum's profiles
- updated GRADLE to 5.1.0
- added full support for newest versions of AlucardPlug, ClusterPlug, ThunderPlug, BluePlug, MakoPlug, AutoSMP, AiO
- some improvments and fixes

ThunderTweaks v1.0.1 for TS kernel v1.8 :
- based on ThunderTweaks v1.0.0
- added new ThundeRStormS Spectrum Profiles and support now 9 spectrum's profiles
- some improvments

ThunderTweaks v1.0.0 for TS kernel v1.7 :
- based on hKTweaks v1.1.5
- added full support for new AotoSMP hotplug adaptated to Exynos 8890 by ThundeRStormS team
- added fix for settings max ZRAM disk size up to 4GB
- added new ThundeRStormS Spectrum Profile and support now 5 spectrum's profiles
- first ThundeRStormS Kernel Manager

SOURCE:
https://github.com/ThunderStorms21th/ThunderTweaks

ThunderTweaks - all versions link : GoogleDrive | FOR S7 FLAT / EDGE |

DOWNLOAD:
ThunderTweaks v1.0.4.0 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.3.3 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.3.2 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.3.1 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.1 : GoogleDrive | FOR S7 FLAT / EDGE |
ThunderTweaks v1.0.0 : GoogleDrive | FOR S7 FLAT / EDGE |
 
Last edited:

matt_988

Senior Member
Nov 6, 2016
98
28
I can confirm, this kernel is a great compromise of battery life and performance, at 50% i've over 2 hours SOT, with normal use (S7 FLAT: spotify, email, whatsapp, excel, kiwi browser, maps, gps and bluetooth always on) i can easily arrive at full discharge with 4 hours and +. And my battery is 3 years old! Also standby consumption is fantastic, and phone is never hot!!!! I've attached a screenshot of battery life of S10E (3100 mah), a newer phone but not so good as S7 (3000 mah). Many thanks to dev.
View attachment 4742881
 
Last edited:
  • Like
Reactions: Vucko_sk

nalas

Senior Member
Nov 19, 2012
1,216
928
Poland
I can confirm, this kernel is a great compromise of battery life and performance, at 50% i've over 2 hours SOT, with normal use (S7 FLAT: spotify, email, whatsapp, excel, kiwi browser, maps, gps and bluetooth always on) i can easily arrive at full discharge with 4 hours and +. And my battery is 3 years old! Also standby consumption is fantastic, and phone is never hot!!!! I've attached a screenshot of battery life of S10E (3100 mah), a newer phone but not so good as S7 (3000 mah). Many thanks to dev.
View attachment 4742881

Nice to hear :) enjoy then and be in touch in new updates :)

PS
3:35h on S10 ? ulalalal bad...
Dont panic - maybe I will buy s10e so I will arrive with my kernel too :)
 
  • Like
Reactions: matt_988

matt_988

Senior Member
Nov 6, 2016
98
28
Nice to hear :) enjoy then and be in touch in new updates :)

PS
3:35h on S10 ? ulalalal bad...
Dont panic - maybe I will buy s10e so I will arrive with my kernel too :)
Not my, take from a web review :), i will change my s7 when 5g is ready in my country, and for now s7 works well :D:D:D
 

matt_988

Senior Member
Nov 6, 2016
98
28
Hi @nalas, how to remove morosound and relative drivers? I don't want any tipe of sound mod, because decreasing speaker volume. Only want the good and old flat sound.
 

nalas

Senior Member
Nov 19, 2012
1,216
928
Poland
You can turn off this in MTweaks but generaly this is default off so no changes any sound.
Hi @nalas, how to remove morosound and relative drivers? I don't want any tipe of sound mod, because decreasing speaker volume. Only want the good and old flat sound.

Wysłane z mojego SM-N935F przy użyciu Tapatalka
 

matt_988

Senior Member
Nov 6, 2016
98
28
You can turn off this in MTweaks but generaly this is default off so no changes any sound.

Wysłane z mojego SM-N935F przy użyciu Tapatalka
Yes, i know this but it seems there are some things always active, like Viper4Android (i remember this, installed in my Xiaomi Mi5 where there was the same problem, play a song and sound was normal for a second but after it changed. I fix the problem uninstalling Viper4Android. In fact, in oreo, stock sound drivers only dual speaker mod, soud was flat and loud). If you could do an aroma for let decide us what mod we can install it could be fantastic.

Also, a small problem, music control in lokscreen and aod don't work with this kernel, can you fix? Thank you for your hard work.
 
Last edited:

nalas

Senior Member
Nov 19, 2012
1,216
928
Poland
Moro Drivers are implemented in kernel linux source so no chanse do Aroma for install, It must be make in two kernels compiled with and without Moro Drivers.

I have no time for this...
No one has that issue and me too no have problems with Viper i use this all the time.

I will stay with Moro.
So if you want so change kernel pls with no moro sound.
Yes, i know this but it seems there are some things always active, like Viper4Android (i remember this, installed in my Xiaomi Mi5 where there was the same problem, play a song and sound was normal for a second but after it changed. I fix the problem uninstalling Viper4Android. In fact, in oreo, stock sound drivers only dual speaker mod, soud was flat and loud). If you could do an aroma for let decide us what mod we can install it could be fantastic.

Also, a small problem, music control in lokscreen and aod don't work with this kernel, can you fix? Thank you for your hard work.

Wysłane z mojego SM-N935F przy użyciu Tapatalka
 

Renell

Senior Member
Mar 19, 2019
71
15
Is this kernel the best out right now? coming from ariano (best one so far).. moro has horrible battery life.. how is this kernel?
 

oufouf84

Senior Member
Oct 5, 2018
106
24
SORGUES
hi,
thank for great kernel, have just one question, in aroma what is "patch for deodexed and ported roms" and should I checked ? have use blackdiamond rom.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 32
    ThundeRStormS "Galaxy S7/S7edge (SM-G930/935 F/FD) TW Oreo, OneUI Pie and Q, Treble and AOSP kernel"

    Compatibility notes :
    Android TW OREO, OneUI PIE and Q, TREBLE, AOSP RELEASE odexed and deodexed roms
    S7 ROMs - G930/G935 F/FD
    'I don't use any ported rom so I can't check it'

    (If You want to install ported roms - pls uncheck Priv fix for stock Roms in installation process and select fix for deodexed and ported roms and look at Installation section in OP)

    The kernel use an AROMA installer to help guide you through the installation.


    Recommended Apps:
    To tweak most of the settings in the kernel, I recommend using ThunderTweaks app.
    _________________________________________________

    IMPORTANT INFORMATIONS:
    1. WARNING: YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
    2. YOUR WARRANTY CAN BE VOID.
    "I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
    Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point
    the finger at me for messing up your device, You can't blame me for this fact."

    3. NO REQUESTS!!!

    _________________________________________________

    KERNEL FEATURES:
    - based on stock Samsung kernel N935KKKU4CSK1
    - based on latest source ||3.18.91||
    - Flat and Edge support
    - Odexed / Deodexed Roms
    - Oreo, Pie, Treble and AOSP Roms
    - Aroma installer
    - init.d support
    - lot of CPU governors
    - Conservative governor editable (now You can edit governors values)
    - lower than stock's values for big and little CPUs frequencies to 208/130 MHz
    - lower than stock's values for GPU frequencies to 112MHz
    - lot of I/O schedulers
    - TCP : cubic, htcp, reno, bic, westwood, vegas, veno, lia, olia, wvegas
    - SELinux status to permissive/enforcing
    - disasbled DM-Verity, Knox, RKP, Tima, Rooting Restriction
    - Magisk, ThunderTweaks
    - Spectrum support
    - Low Memory Killer Deamon support , LMK is disabled
    - ArchPower
    - PWM Flicker Free
    - CPU voltage control
    - standard wakelocks
    - Boeffla wakelock control
    - Battery settings controls
    - ABS clock fixed to 64bit
    - GPU Thermal Throttling
    - GPU voltage control
    - GPU OC to 806 MHz
    - F2FS, CIFS and NFS files support
    - Fsync control and CRC
    - Dynamic Fsync
    - Gentle Sleepers support
    - Wireguard VPN support
    - Moro Sound Drivers
    - Support for Low Memory Killer Deamon
    - Disabled old Low Memory Killer
    - LED controls
    - Support 10 Spectrum Profiles with ThundeRStormS profiles
    - ThunderStrom CPU governor based on Interactive with new editable feature
    - Gestures Wakeup controls
    - Support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster, Thunderbolt, Lazy, Fast, MSM - first kernel with this features
    ..MTweaks do not support all features of hotplugs so all settings are not available to change
    ..You can do it via file browser and change values in sys files of this module - some parts.
    - VNSwap default is turned ON | If You want it OFF, select in Aroma Installer.
    - ZRAM max file is changed to 4,0GB but default is turned OFF | disk space for ZRAM is editable.
    - Input Boost drivers and control for CPU each core | first kernel with this feature for S7 TW
    - Input Boost for CPU | for Little.big clusters first kernel with this feature for S7 TW
    - Fingerprint Boost | first kernel with this feature for S7 TW
    - this kernel is not for people who want to get big bentchmark scores, OC, etc.
    - this kernel is for daily use for better battery life with good balanced work

    What is not included:
    - no OC for CPU
    - no synapse support
    _________________________________________________

    INSTALLATION PROCESS:

    FOR STOCK ODEX/DEODEX, Treble and AOSP ROMS

    • FIRST - Clear cache apps like Kernel Adiutor or MTweaks or another one in system app menager !!!
    • Backup EFS, DATA and KERNEL as always in TWRP !!!
    • Download the latest kernel version zip file
    • Go to recovery
    • Flash the CLEAN ROM, next restore Your DATA and flash the kernel zip with root or not
    • Choose aroma selection
    • Flash Magisk separately or with Aroma installer
    • Reboot
    • ThunderTweaks app is installed.

    If You wnat to flash this kernel and have installed another custom kernel like MoRoKernel or Arianoxx, You have to clear ThunderTweaks, MTweaks or Kernel Adiutor cache before You install.
    If You dont want one of the possibilities for root inside Aroma Installer please choose no root and next flash any root mods manually.

    PROBLEMS / BUGS:

    Thanks for reports.
    _________________________________________________

    CREDITS AND THANKS:
    - The Linux Kernel Archive for the Linux Patches https://www.kernel.org/
    - Samsung Open Source Release Center for the Source code http://opensource.samsung.com/
    - Project: Exynos-Linux-Stable for updated ELS Linux source codes https://github.com/exynos-linux-stable
    - @morogoku and @francitato02 for his help and explanation of the compile and configure kernel processing, codes and commits
    - @djb77 for his help and explanation of the compile and configure kernel processing, codes and commits
    - @Tkkg1994, @francitato02, @Noxxxious, @farovitus, and @mwilky for help, codes and commits
    - @osm0sis for Android Image Kitchen and anykernel2 https://forum.xda-developers.com/showthread.php?t=2073775
    - Magisk and SuperSu Team for root method
    - @ModX81 for new base of ramdisk, CP and BL from Samsung
    - Tester : @wille95, @youpeero, @TheesKyr, @cenelyanto, @Franz S., @phghost, @insanowsky, @Shariq3422, @UsmaniMustafa, @trankill, @rtakak, @shah22, HambaAllah
    - Tester, idea & support : @matt_988, @Kyo-Ito
    - Thanks to @noid - for fixing auto installation of ThunderTweaks and many other things
    _________________________________________________

    SOURCE of the kernel:
    GitHub:
    https://github.com/ThunderStorms21th/S7-Linux-3.18.140
    GitHub: https://github.com/ThunderStorms21th/S7-Linux-3.18.140-EAS
    _________________________________________________

    Contributors:
    @nalas, @callidus_ex_de_latebros, @VHFG22, @tetsuo55
    ThundeRStormS Team
    _________________________________________________

    DISCUSSION:
    Telegram Group:
    Link
    Telegram News Channel:
    Link
    _________________________________________________

    Version Information:
    Statsus : Stable
    Current version : Aio v4.3
    Release Date : 2021-01-19


    --------------------------------------------------------------------------------
    DONATION:
    If you liked my work, you can collaborate by giving thanks and with some donation to continue working hard.
    Thank you very much to all.
    DONATION

    CHANGELOGS & DOWNLOADS in 2nd post
    16
    CHANGELOGS and DOWNLOADS

    CHANGELOGS:

    Version AiO v1.2
    • ROM OREO, PIE, TREBLE and AOSP support
    • Releases OREO(v2.6), PIE(v2.3), TREBLE-Q(v1.0), TREBLE-OneUI-Q (v1.0), AOSP-PIE(v1.2) and AOSP-Q(v1.0)
    • Samsung sources N935KKKU4CSK1
    • ThunderTweaks 1.0.4.0 | adaptaded to ThundeRStormS kernels |
    • Linux updated to 3.18.91
    • Compiler : aarch64-linux-android-4.9
    • Powersuspend updated to v1.9
    • Improvements in kernel source : crypto, f2fs, cfq, block, bfq, adb, mtp, mm, fs, RCU, HZ, hibernation, suspend, cpufreq and linux
    • Support LMK, LMK Deamon is disabled (not works properly)
    • F2FS Support
    • Possibly Fixed drain battery and some improvements
    • Magisk 20.1 | Magisk 20.2 phh for Q
    • Rest like in AiO v1.1
    --------------------------------------------------------------------------------
    Version AiO v1.1
    • ROM OREO, PIE, TREBLE and AOSP support
    • Busybox removed to fix Root check for secured apps
    • Releases OREO(v2.5), PIE(v2.2), TREBLE(v1.1) and AOSP(v1.1)
    • Samsung sources S5CSF1
    • Samsung ramdisk S5CSF1
    • ThunderTweaks 1.0.3.4 | adaptaded to ThundeRStormS kernels |
    • Linux updated to 3.18.140
    • Compiler : aarch64-linux-android-4.9
    • Iris service disabled
    • GPU for Pie, Treble R28 PIE drivers and for Oreo & AOSP R22 Oreo drivers
    • Improvements in kernel source : crypto, f2fs, cfq, block, bfq, adb, mtp, mm, fs, RCU, HZ and linux
    • Support LMK, LMK Deamon is disabled (not works properly)
    • F2FS, CIFS, NFS Support
    • Possibly Fixed drain battery and some improvements
    • Magisk 19.4 Official for all OS
    • Rest like in AiO v1.0
    Version AiO v1.0
    • ROM OREO, PIE, TREBLE and AOSP support
    • Releases OREO(v2.4), PIE(v2.1), TREBLE(v1.0) and AOSP(v1.0)
    • Samsung sources S5CSF1
    • Samsung ramdisk S5CSF1
    • ThunderTweaks 1.0.3.3 | adaptaded to ThundeRStormS kernels |
    • Magisk 19.4/19.3 in Oreo
    • Linux updated to 3.18.140
    • Compiler : aarch64-linux-android-4.9
    • Iris service disabled
    • GPU for Pie, Treble R28 PIE drivers and for Oreo & AOSP R22 Oreo drivers
    • Some CPU governors are updated : new MinMax & Userspace
    • Support LMK Deamon, LMK is disabled
    • Early SF Fixed
    • F2FS, CIFS, NFS Support
    • Improvements for IRQ PM suspend mode
    • Possibly Fixed drain battery and some improvements
    • New Aroma theme and improvements
    • Rest like eariel releases
    Version v2.0
    • ROM PIE NFE and N8 support
    • Samsung sources S5CSF1
    • Samsung ramdisk S5CSF1
    • ThunderTweaks 1.0.3.2 | adaptaded to ThundeRStormS kernels |
    • Flat and Edge now supported
    • Magisk 19.4
    • Linux updated to 3.18.140
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Iris service disabled
    • Updated 10 Spectrum Profiles
    • GPU R28 PIE drivers only
    • Some CPU governors are updated : new MinMax & Userspace
    • Wireguard VPN supported
    • Gestures Wakeup supported
    • Added full support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, ClusterPlug, ThunderPlug
    • ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
    • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
    • Fingerprint Boost support - default turned OFF.
    • Added Input Boost for big.LITTLE clusters for each core
    • Possibly Fixed drain battery and some improvements
    • SELinux Permissive
    • New Aroma theme and improvements
    Version v1.9
    • ROM PIE NFE and N8 support
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • ThunderTweaks 1.0.3.1 | adaptaded to ThundeRStormS kernels |
    • Flat and Edge now supported
    • Magisk 19.4
    • REMOVED : TWRP 3.3.0-0 fixed by AJ's
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools Fix - thx to MoroGoku
    • Camera Fix - now SONY/SAMSUNG works
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
    • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Iris service disabled
    • Support now 10 Spectrum Profiles with NEW ThundeRSTormS profiles
    • Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
    • Added TTL support for IP
    • Bluetooth OREO drivers
    • GPU R28 PIE drivers only
    • REMOVED GPU LIBS for Oreo and PIE | now rom's libs will be used.
    • Added new I/O scheds : Anxiety and Maple
    • Some CPU governors are updated
    • Wireguard VPN supported
    • Gestures Wakeup supported
    • Added SSP sensor battery drain
    • Added full support Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, ClusterPlug, ThunderPlug
    • ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
    • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
    • Fingerprint Boost support - default turned OFF.
    • Added Input Boost for big.LITTLE clusters.
    • Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
    • ZSWAP RAM Pool set max from 50 to 60%
    • Some source fixes
    • Added NEBULA CPU gov
    • Possibly Fixed drain battery and some improvements
    • SELinux Permissive
    Version v1.8
    • ROM PIE NFE and N8 support
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • ThunderTweaks 1.0.1 | adaptaded to ThundeRStormS kernels |
    • Flat and Edge now supported
    • Magisk 19.3 back again
    • TWRP 3.3.0-0 fixed by AJ's
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools Fix - thx to MoroGoku
    • Camera Fix - now SONY/SAMSUNG works
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
    • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Iris service disabled
    • Support now 10 Spectrum Profiles with NEW ThundeRSTormS profiles
    • Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
    • Added TTL support for IP
    • Bluetooth OREO drivers
    • Added new I/O scheds : Anxiety and Maple
    • Some CPU governors are updated
    • Wireguard VPN supported
    • Gestures Wakeup supported
    • Added SSP sensor battery drain
    • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster
    • ZRAM max files set at 4,0GB - default OFF | Now is editable by user.
    • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
    • Fingerprint Boost support - default turned OFF.
    • Added Input Boost for big.LITTLE clusters.
    • Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
    • ZSWAP RAM Pool set max from 50 to 60%
    • Possibly Fixed drain battery
    • SELinux Permissive
    Version v1.7
    • ROM PIE NFE and N8 support
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • ThunderTweaks 1.0.0 | adaptaded to ThundeRStormS kernels |
    • Flat and Edge now supported
    • Magisk 19.0 back again
    • TWRP 3.3.0-0 fixed by AJ's
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools Fix - thx to MoroGoku
    • Camera Fix - now SONY/SAMSUNG works
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
    • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Iris service disabled
    • Support now 5 Spectrum Profiles with NEW ThundeRSTormS profile
    • Added NEW Thunderstorm CPU Governor based on Interactive with new editable feature
    • Added TTL support for IP
    • Added new I/O scheds : Anxiety and Maple
    • Some CPU governors are updated
    • Wireguard VPN supported
    • Gestures Wakeup supported
    • Added SSP sensor battery drain
    • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster | MTweaks don't support some settings yet but will be in the future - thx to Moro.
    • ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
    • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
    • Fingerprint Boost support - default turned OFF | MTweaks don't support toggle yet.
    • Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
    • ZSWAP RAM Pool set max from 50 to 60%
    • Possibly Fixed drain battery
    • SELinux Permissive
    Version v1.6
    • ROM PIE NFE and N8 support
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • MTweaks 2.14.0 | fixed installation
    • Flat and Edge now supported
    • Magisk 19.0 back again
    • TWRP 3.3.0-0 fixed by AJ's
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools Fix - thx to MoroGoku
    • Camera Fix - now SONY/SAMSUNG works
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
    • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Iris service disabled
    • Added TTL support for IP
    • Added new I/O scheds : Anxiety and Maple
    • Some CPU governors are updated
    • Wireguard VPN supported
    • Gestures Wakeup supported
    • Added SSP sensor battery drain
    • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP, Mako, Cluster | MTweaks don't support some settings yet but will be in the future - thx to Moro.
    • ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
    • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
    • Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
    • Fixed AiO and AutoSMP Hotplugs for 2 Clusters Octa cores Exynos
    • ZSWAP RAM Pool set max from 50 to 60%
    • Possibly Fixed drain battery
    • SELinux Permissive
    Version v1.5
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • MTweaks 2.14.0 | fixed installation
    • Flat and Edge now supported
    • Magisk 19.0 back again
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools Fix - thx to MoroGoku
    • Camera Fix - now SONY/SAMSUNG works
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
    • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Iris service disabled
    • Added TTL support for IP
    • Added new I/O scheds : Anxiety and Maple
    • Some CPU governors are updated
    • Wireguard VPN supported
    • Gestures Wakeup supported
    • Added SSP sensor battery drain
    • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP | MTweaks don't support some settings yet but will be in the future - thx to Moro.
    • ZRAM max files set at 2,5GB - default OFF | Now is editable by user.
    • VNSwap truned ON by default | If You want to turn it OFF You have to select one option for it in Aroma Installer.
    • Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
    • Possibly Fixed drain battery
    • SELinux Permissive
    • Rest like in TS-PIE v1.4
    Version v1.4
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • MTweaks 2.14.0 | fixed installation
    • Flat and Edge now supported
    • Magisk 19.0 back again
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools Fix - thx to MoroGoku
    • Camera Fix - now SONY/SAMSUNG works
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
    • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Iris service disabled
    • Wireguard VPN supported
    • Gestures Wakeup supported
    • Added SSP sensor battery drain
    • Added Hotplugs : Alucard, AiO, Zen Decision and AutoSMP | MTweaks don't support some settings yet but will be in the future - thx to Moro.
    • ZRAM max files set at 2,5GB - default OFF
    • VNSwap truned OFF by default | If You want to turn it ON You have to delete TS script from Init.d folder
    • Fingerprint Boost support - default turned ON | MTweaks don't support toggle yet but will be in the future - thx to Moro.
    • Possibly Fixed drain battery
    • SELinux Permissive
    • Rest like in TS-PIE v1.3
    Version v1.3
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • MTweaks 2.14.0 | fixed installation
    • Flat and Edge now supported
    • Magisk 19.0 back again
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools Fix - thx to MoroGoku
    • Camera Fix - now SONY/SAMSUNG works
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
    • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Iris service disabled
    • Wireguard VPN supported
    • Gestures Wakeup supported
    • Added SSP sensor battery drain
    • Possibly Fixed drain battery
    • SELinux Permissive
    • Rest like in TS-PIE v1.2
    Version v1.2
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • MTweaks 2.14.0 | fixed installation
    • Removed Smartpack-Kernel Manager v7.5
    • Flat and Edge now supported
    • Magisk 19.0 back again
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools Fix - thx to MoroGoku
    • Camera Fix - now SONY/SAMSUNG works
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 208/130 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 312/234 MHz
    • CPU Freq setup : changes in voltage tables for lower power consuption for boot and normal work time
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Wireguard VPN supported
    • Added SSP sensor battery drain
    • Possibly Fixed drain battery
    • SELinux Permissive
    • Rest like in TS-PIE v1.1
    Version v1.1
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • MTweaks 2.14.0
    • Smartpack-Kernel Manager v7.5
    • Flat and Edge now supported
    • Magisk 18.1 | System files and folders now are visible - problem of Magisk 19.0
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools fix - thx to MoroGoku
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Wireguard VPN supported
    • Added SSP sensor battery drain
    • Possibly Fixed drain battery
    • SELinux Permissive
    • Rest like in TS-PIE v1.0.1
    Version v1.0.1
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • MTweaks 2.14.0
    • Smartpack-Kernel Manager v7.5
    • Flat and Edge now supported
    • Magisk 18.1 | now System files are visible - problem of Magisk 19.0
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Game Tools fix - thx to MoroGoku
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
    • Fixed ABS clock to 64bit
    • Fixed some SCSI drivers
    • Added ArchPower support
    • Added Dynamic Fsync and Gentle Sleepers support
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Wireguard VPN supported
    • Possibly Fixed drain battery
    • SELinux Permissive
    • Rest like in TS-PIE v1.0
    Version v1.0
    • Samsung sources U4CSC4
    • Samsung ramdisk U4CSC4
    • MTweaks 2.13.5
    • Smartpack-Kernel Manager v7.5
    • Flat and Edge now supported
    • Magisk 19.0
    • Knox 0x0 & SafetyNet with SuperSU and Magisk
    • SuperSU 2.82SR5 + SuHide v1.09
    • Linux 3.18.91 Samsung source
    • Unlocked big CPU 4 cores to 2600MHz
    • CPU Freq range : Higher Freq 2600/1586 MHz and Low Freq at 416/338 MHz
    • CPU Freq setup : Higher Freq 2288/1586 MHz and Low Freq at 416/338 MHz
    • GPU Freq: 112-806MHz Stock
    • Added GPU Throttling
    • Added CPU and GPU voltage control
    • Added GPU OC to 806MHz
    • Added Fsync - default turn off
    • Added CRC - default turn off
    • Added standard wakelocks
    • Added Boeflla wakelocks
    • Added Battery Store and settings control
    • Fixed ABS clock to 64bit
    • Compiler : aarch64-linux-android-4.9
    • Spectrum and profiles supported
    • Wireguard VPN supported
    • Possibly Fixed drain battery
    • Some CPU governors
    • Lot of I/O Shedulers
    • HMP settings : 760/240 and some freq chcnages
    • USB charge to 700MHz in normall mode
    • USB charge to 900MHz in fast mode
    • Added VENO, VEGAS to TCP, etc.
    • Lot of CPU governors
    • Added PWM Flicker Free - default turn off
    • Moro Sound Drivers
    • Led controls
    • SELinux Permissive
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    DOWNLOADS:
    ThundeRStormS kernel AiO v1.2 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel AiO v1.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel AiO v1.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v2.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.9 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.8 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.7 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.6 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.5 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.4 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.3 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.2 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.0.1 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    ThundeRStormS kernel v1.0 : GoogleDrive or androidfilehost |FOR S7 FLAT / EDGE|
    11
    Update to TS v1.7

    Update to TS v1.7
    New kernel TS-PIE-v1.7

    Changelog:
    - added ThunderTweaks v 1.0.0
    - added Thunderstorm CPU gov
    - added Thunderstorm Spectrum Profile
    - support 5 Spectrum profiles
    - some battery improvments
    9
    Update to TS v1.9

    New update to TS-PIE-v1.9 and ThunderTweaks v1.0.3.1

    Look at OP 1st and 2nd and 3rd posts.
    8
    ThunderTweaks

    Added new Kernel Manager app for ThundeRStormS kernel:

    ------------------------------------------------------------------------------------------------------------------
    ThunderTweaks is an app based on Kernel Adiutor Willi Ye next modded by MoRoGoKu (MTweaks) and Corsicanu (hKTweaks).

    Big thx for them.

    ThunderTweaks v1.0.0 :
    - based on hKTweaks v1.1.5
    - added full support for new AotoSMP hotplug adaptated to Exynos 8890 by ThundeRStormS team
    - added fix for settings max ZRAM disk size up to 4GB
    - added new ThundeRStormS Spectrum Profile and support now 5 spectrum's profiles
    - first ThundeRStormS Kernel Manager

    DOWNLOAD:
    ThunderTweaks v1.0.0 : GoogleDrive | FOR S7 FLAT / EDGE |
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone