In this context, maybe the following could be an option:
https://www.xda-developers.com/fwul-android-debugging-distro-3-0/amp/
https://www.xda-developers.com/fwul-android-debugging-distro-3-0/amp/
I think I've never compiled one which is compatible with it. Only use on mentioned ROMs or try on own risk.Which AnyKernel OC version should I choose for latest SlimLP?
Slim-espresso3g-5.1.1.beta.0.18-UNOFFICIAL-20170117-2118.zip
(...)
NOTE:
This product is provided "as is" without any warranty. Use on your own risk.
I am not responsible for burned CPU or GPU.
Any kind of OC is really dangerous on Galaxy Tab2. While OMAP 4460 has a built-in temperature sensor, OMAP 4430 doesn't have one. Nothing stops it from overheating...
(...)
- This will be a "one-time-only" kernel.
- It's compatible with my ROMs compiled since March 2019
(Should work on my Slim6 + 7, Omni 6 + 7 and LineageOS 13 + 14.1 compiled after 01.03.2019.
Special KitKat Kernel attached which should work on my SlimKat, Omni 4 and LineageOS 11 compiled after 01.03.2019).
- don't use it on older ROMs
- don't use on ROMs i haven't compiled
No need to wait or try. There's no compatible OC kernel here.
Hi, is this the most updated version? I had to ask in case I missed something else and because it can't be found on your homepage. I'm gonna use it with latest Omni 6 Rom.New Anykernel to test optimized cpufreq transition latency
If you are using a ROM with default libion (see OP) and compiled before March 2019 stop reading and continue here https://xdaforums.com/showpost.php?p=79316186&postcount=215
- It's compatible with my ROMs compiled since March 2019
(Should work on my Slim6 + 7, Omni 6 + 7 and LineageOS 13 + 14.1 compiled after 01.03.2019.
Special KitKat Kernel attached which should work on my SlimKat, Omni 4 and LineageOS 11 compiled after 01.03.2019).
- don't use it on older ROMs
- don't use on ROMs i haven't compiled
Special "OC-UV" Version
NOTE:
This product is provided "as is" without any warranty. Use on your own risk.
I am not responsible for burned CPU or GPU.
Any kind of OC is really dangerous on Galaxy Tab2. While OMAP 4460 has a built-in temperature sensor, OMAP 4430 doesn't have one. Nothing stops it from overheating...
- Limit maximum CPU frequency @ 1.35GHz , GPU @ 384 Mhz
- CPU will work up to 1.35 GHz without root
- You need root and an app like Kernel Adiutor to enable GPU 384 Mhz frequency
- Undervolted on default frequencies
Code:$ adb shell cat /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table 1350mhz: 1360 mV 1200mhz: 1325 mV 1008mhz: 1274 mV 800mhz: 1213 mV 600mhz: 1100 mV 300mhz: 925 mV
I'd be happy to get some feedback, especially on the default version without OC.
If you post feedback please tell:
- used ROM (& build date)
- used Anykernel
- your device variant (P3100, P3110, P3113,P5100, P5110 or P5113)
Have a great day!
This one?[edit2]
Ah, when I use the undervolt kernel, everything is fine and runs quite well on 1.3GHz. When I use the regular OC kernel, core2 keeps running at 100%, as well as with the non-OC anykernel. So if anyone runs into this, try the OC-UV kernel, it might work for you.
Thank you very much Andi, good job.
I have a problem, i hope you will help me pls:
Streaming videos don't work on the browser like youtube. I tried stock browser and chrome, the same problem.
(240p videos work, 360p: not very smooth. 480p and 720p doesn't work).
No problem with stream app like youtube app: 720p: ok (strange...)
I have Galaxy tab 2 (Espresso 3g). I tried 3 roms: slim 6, Aosp 6, slim 7 and Aosp 7: same problem for all these roms.
I tried Also: anykernel OC-UV : no difference.
I tried without and then with gapps: same problem...
Can you help me please to solve this issue.
Thank you,
Some websites (stream... don't have app...).
The ROMs in his site: andi34.github.ioI didn't find the rom. When it says "It's compatible with my ROMs", where is it?
Hi,New Anykernel to test optimized cpufreq transition latency
If you are using a ROM with default libion (see OP) and compiled before March 2019 stop reading and continue here https://xdaforums.com/showpost.php?p=79316186&postcount=215
- It's compatible with my ROMs compiled since March 2019
(Should work on my Slim6 + 7, Omni 6 + 7 and LineageOS 13 + 14.1 compiled after 01.03.2019.
Special KitKat Kernel attached which should work on my SlimKat, Omni 4 and LineageOS 11 compiled after 01.03.2019).
- don't use it on older ROMs
- don't use on ROMs i haven't compiled
Special "OC-UV" Version
NOTE:
This product is provided "as is" without any warranty. Use on your own risk.
I am not responsible for burned CPU or GPU.
Any kind of OC is really dangerous on Galaxy Tab2. While OMAP 4460 has a built-in temperature sensor, OMAP 4430 doesn't have one. Nothing stops it from overheating...
- Limit maximum CPU frequency @ 1.35GHz , GPU @ 384 Mhz
- CPU will work up to 1.35 GHz without root
- You need root and an app like Kernel Adiutor to enable GPU 384 Mhz frequency
- Undervolted on default frequencies
Code:$ adb shell cat /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table 1350mhz: 1360 mV 1200mhz: 1325 mV 1008mhz: 1274 mV 800mhz: 1213 mV 600mhz: 1100 mV 300mhz: 925 mV
I'd be happy to get some feedback, especially on the default version without OC.
If you post feedback please tell:
- used ROM (& build date)
- used Anykernel
- your device variant (P3100, P3110, P3113,P5100, P5110 or P5113)
Have a great day!
$ adb shell cat /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table
1350mhz: 1360 mV
1200mhz: 1325 mV
1008mhz: 1388 mV
800mhz: 1325 mV
600mhz: 1200 mV
300mhz: 1025 mV
$ adb shell cat /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table
1350mhz: 1360 mV
1200mhz: 1325 mV
1008mhz: 1274 mV
800mhz: 1213 mV
600mhz: 1100 mV
300mhz: 925 mV