[KERNEL][V7.0|13-June-2020]ResurrectedKernel

Search This thread

kirillinda

New member
Oct 4, 2019
1
0
Moscow
Im using stable brunch from github. Why dmesg is not working in shell then I use this kernel in my builds? I tried to reconfigure the kernel in many ways but CONFIG_PRINTK=y so it is still unclear why I cant get any kernel logs. Can someone figure out whats wrong exactly? logging in afr30010's kernel works well.
 
Last edited:

cuoresporttivo

Senior Member
Dec 4, 2010
61
21
Realme 7 Pro
Hy! Can i ask you something? I really want to flash this kernel but right now i am on REVOS 9.10.17 beta, android pie. What version of this kernel can i flash? Thank you in advance! ?
 

Attachments

  • IMG_20191109_170822.jpg
    IMG_20191109_170822.jpg
    158.9 KB · Views: 581

doktor29

Senior Member
Dec 21, 2010
409
62
question to dev
is possible to make kernel to work this way:
when phone is off -> conecting usb charger -> its boot and check battery status -> if lower than "X" % then charge till X value, if is higher than X will boot to system ?

im lookong for solution because planing to make it as CarPC in dashboard, and rule above prevent bootlop when battery is discharge to zero.
 

nokiagye

Senior Member
Aug 15, 2012
3,009
440
40
thessaloniki
Good morning
Mario now we have the source of the 10 you are the only one that can build this kernel. You have the time? Can we hope for an updated version? Thanks
 

mario_R

Senior Member
Mar 28, 2014
400
477
26
Redmi Note 2
Xiaomi Redmi 2
question to dev
is possible to make kernel to work this way:
when phone is off -> conecting usb charger -> its boot and check battery status -> if lower than "X" % then charge till X value, if is higher than X will boot to system ?

im lookong for solution because planing to make it as CarPC in dashboard, and rule above prevent bootlop when battery is discharge to zero.
You could do this with Tasker app, but I don't think it can boot your phone up if you only connect the cable
 

lmemperador

Senior Member
Dec 6, 2007
377
9
@mario. Thanks a lot for your great work. Awesome kernel.
Please, Can you add gadget drivers? so we can use it as mass storage device for example with UMS enabler.app

Thanks anyway for your hard work
 
Last edited:

mario_R

Senior Member
Mar 28, 2014
400
477
26
Redmi Note 2
Xiaomi Redmi 2
ResurrectedKernel v7.0

V7.0 version is out guys! Check it out! This version will work with any MIUI and GSI based on Android 10

Changelog:
V7.0:
-Android 10 support
-MIUI and GSI compatible
-most of the goodies from previous version, so for now its:
-Overclock+Underclock+Undervolt
-sdFAT(exFAT) support
-KCAL
-Governors: nightmare, darknessV5, darkness, alucard
-Maple I/O scheduler
-GPU undervolt
-Fast charge via USB port
-Wireguard
-Power Efficient Workqueue by default
-Headphones sound gain control
-320K AAC encoding (for audiophiles mostly)
-Powersuspend!
-many power efficient workingueues patches

Few things need to be added like 19MHz for GPU, westwood TCP, mine CPU governor presets etc.
Wireguard will be always up-to-date whenewer I compile new version
So that's it for today. Enjoy!


 
Last edited:

arraki

Senior Member
Feb 26, 2014
182
25
Hi Mario, after the firmware of the new core, I learned a message in the curtain:the memory card is damaged,you need to format it.
 

Attachments

  • Screenshot_2020-06-13-21-16-13-552_com.android.settings.jpg
    Screenshot_2020-06-13-21-16-13-552_com.android.settings.jpg
    124.4 KB · Views: 156

Top Liked Posts

  • There are no posts matching your filters.
  • 35
    I would like to present you first kernel for nitrogen for Pie ROMS (MIUI+GSI)

    Installation steps:
    1)Download latest kernel zip
    2)Reboot to recovery
    3)Mount vendor partition in recovery
    4)Flash kernel zip
    5)Wipe cache+dalvik-cache
    6)Reboot

    Features:
    -Overclock+Underclock+Undervolt
    -sdFAT(exFAT) support
    -KCAL
    -Governors: cultivation, nightmare, darknessV5, darkness, alucard
    -Maple I/O scheduler
    -GPU undervolt
    -CRC on/off support
    -FSYNC on/off support
    -Fast charge via USB port
    -Wireguard
    -Power Efficient Workqueue by default
    -Headphones sound gain control
    -Microphone gain control
    -320K AAC encoding (for audiophiles mostly)
    -Powersuspend!
    -many power efficient workingueues patches
    -ZRAM/SWAP disabled by default

    Feel free to join to my Telegram group where you will get available ROMs list, fixes and latest test versions of ResurrectedKernel! :D :
    JOIN!





    IM NOT RESPONSIBLE FOR ANY PROBLEMS OR BUGS THAT MIGHT HAPPEN WITH YOUR DEVICE

    XDA:DevDB Information
    ResurrectedKernel, Kernel for the Xiaomi Mi Max 3

    Contributors
    mario_R
    Cirno/remicaa- big help with sources
    afr- bringup kernel source upstreamed to 4.4.180
    Makshow- tester
    opasha- tester
    Source Code: Click

    Kernel Special Features:

    Version Information
    Status: Beta
    Current Stable Version: ----
    Stable Release Date: ----
    Current Beta Version: v5
    Beta Release Date: 2019-04-28

    Created 2018-09-15
    Last Updated 2019-04-28
    16
    v5 has been out!

    It's been a while since i've uploaded last version V4. Today it's time for the V5 release with many modifications. V5 still have some issues on latest MIUI developer versions, but from today I'll work on fix for that issue. So if you are on MIUI stable release or some older MIUI developer version (like 9.3.21) then check this update out


    Here is the changelog:
    -added KCAL
    -Governors: cultivation, nightmare, darknessV5, darkness, alucard
    -Maple I/O scheduler (from now it's set as default since it offers best file system performance)
    -GPU undervolt (saves battery juice without impact on performance)
    -CRC on/off support (off by default for better performance)
    -FSYNC on/off support (off by default for better performance)
    -Fast charge via USB port
    -Wireguard
    -Power Efficient Workqueue by default
    -Headphones sound gain control
    -Microphone gain control
    -320K AAC encoding (for audiophiles mostly)
    -Powersuspend!
    -many power efficient workingueues patches
    -ZRAM/SWAP disabled by default

    What governors combo do I use? Alucard for little cores and interactive for big cores

    13
    RRK V6

    V6 version is out guys! Check it out! This version will work with any rom with beta firmware. Tomorrow I'll release version with support for roms with stable firmware (for people using stable xiaomi.eu variant)
    Changelog:
    V6:
    -kernel upstreamed from 4.4.153 to 4.4.183 (thanks for @afr30010)
    -Westwood TCP added and set by default (you were waiting for it quite long xD, sorry)
    -GPU: unlock 19MHz for idle state
    -improvement: system will now boot with maximum CPU frequency
    -undervolted 1.1GHz/1.8GHz/2.1GHz/2.2GHz frequencies to reduce power consumption and potential fast throttling
    -default pwrlvl for GPU changed from 2 to 3 (now GPU can sit down to 160MHz instead of constantly running at 266MHz even when it's not necessary)
    -CRC check enabled by default (protect data when you get random crash reboot)
    -improvements for RAM utilization
    -improvements for CPU when it's in idle state
    -Wireguard updated

    This version doesn't support official MIUI ROMs. If you flash it and it works like it should then it's fine, if not- don't report it here.
    Custom MIUI ROMs like xiaomi.eu, MIUIPro, mi-globe etc.. should be fine. But remember that I'm compiling this kernel mostly in mind for AOSP based ROMs

    This version includes my configuration preset for kernel which is applied whenever you boot into system. What does it tune:
    -readahead for internal storage set by default to 3072kB instead of 5112kB for better performance
    -minimum CPU frequency set to 300MHz
    -maximum frequency set to 1800MHz for little cluster and 2208MHz for big cluster
    -little cores are using alucard governor
    -big cores are using interactive governor with fine tuned values
    So for now the kernel is like "flash and forget". You dont have to tune it if you want to run with my configuration what i use daily. If you're an advanced user, then you know what to do- any kernel manager and tune the kernel for yourself :cool:

    About that 19MHz for GPU- if you want to use it then you need to switch GPU governor for simple_ondemand (which i do, but didn't set it by default in my kernel preset because some users might not like it) or if you want to still use default msm_adreno_tz governor then you need to set "pwrlvl" value to 4. If you won't do any of these then you'll run with 160MHz as minimum frequency.

    13
    Clean kernel from sources compiled successfuly, everything works. Customized kernel will be released after this weekend
    12
    Reserved

    Every version is tested before pushing it on XDA

    Changelog:

    V7.0:
    -Android 10 support
    -MIUI and GSI compatible

    V6.2:
    -kernel updated to 4.4.189 version
    -added missing touch drivers (thanks to @afr30010)
    -added version for MIUI STABLE

    V6.1:
    -wireguard updated
    -reverted CPU voltages to the previous state (unstability fix for some users)

    V6:
    -kernel upstreamed from 4.4.153 to 4.4.183
    -Westwood TCP added and set by default
    -GPU: unlock 19MHz for idle state
    -improvement: system will now boot with maximum CPU frequency
    -undervolted 1.1GHz/1.8GHz/2.1GHz/2.2GHz frequencies
    -default pwrlvl for GPU changed from 2 to 3 (now GPU can sit down to 160MHz instead of constantly running at 266MHz even when it's not necessary)
    -CRC check enabled by default
    -improvements for RAM utilization
    -improvements for CPU when it's in idle state
    -Wireguard updated
    -mine kernel presets when system boot up
    More info here CLICK

    V5.1:
    -fix for sound+videos on latest beta MIUI versions

    V5.01:
    -re-enabled zRAM and SWAP as some users complain about low memory with a lot of apps in background on 4GB RAM variant

    V5:
    -added KCAL
    -Governors: cultivation, nightmare, darknessV5, darkness, alucard
    -Maple I/O scheduler (from now it's set as default since it offers best file system performance)
    -GPU undervolt
    -CRC on/off support (off by default for better performance)
    -FSYNC on/off support (off by default for better performance)
    -Fast charge via USB port
    -Wireguard
    -Power Efficient Workqueue by default
    -Headphones sound gain control
    -Microphone gain control
    -320K AAC encoding (for audiophiles mostly)
    -Powersuspend!
    -many power efficient workingueues patches
    -ZRAM/SWAP disabled by default

    V4:
    -ResurrectedKernel for Pie ROMs, same features as the Oreo version
    -new features coming soon!
    -update: sound doesn't work on latest miui 9.3.28 and latest stable

    V3:
    -added sdFAT (exfat) support
    -undervolt (as you wanted me to do it few days ago) up to -500000 uV (depends on frequency)

    V2:
    -Overclock both big and little cores
    -Underclock for more battery juice
    -WiFi fixed

    V1:
    -- Initial release