[KERNEL][V7.0|13-June-2020]ResurrectedKernel
- Thread starter mario_R
- Start date
Check this one.
https://drive.google.com/file/d/1opYZTULnVemxR5aN8drf8-pmjCvVpvsF/view?usp=sharing
Don't mind the version in the settings. Check if sdcard works now
Currently I'm testing "ondemand" for both cores. So I don't have any recommendations for you now
Which is the main characteristics for darknessv5?
Enviado desde mi MI MAX 3 mediante Tapatalk
SD Card needs this fix
For info, I flashed v7.0, also got a corrupted sd-card message (32Gb), flashed the above fix and the card is functioning again. (I first tried the fix on its own, but the WiFi didn't work, so it had to be the main release, followed by the fix.)
Early impressions are that this kernel has a very noticeable effect in reducing battery usage.
Well done. Thanks for your work.
Xiaomi Mi Max 3, MIUI 12 (Android 10), latest weekly update.
For info, I flashed v7.0, also got a corrupted sd-card message (32Gb), flashed the above fix and the card is functioning again. (I first tried the fix on its own, but the WiFi didn't work, so it had to be the main release, followed by the fix.)
Early impressions are that this kernel has a very noticeable effect in reducing battery usage.
Well done. Thanks for your work.
Xiaomi Mi Max 3, MIUI 12 (Android 10), latest weekly update.
Last edited:
how would i go about accessing the kernel settings? do i need a kernel manager? if so, which do you recommend?
is this an updated version of the 7.0 for those that have a sdcard?
i installed the 7.0 version and my Wi-Fi isn't working on AOSiP Pie
is this an updated version of the 7.0 for those that have a sdcard?
i installed the 7.0 version and my Wi-Fi isn't working on AOSiP Pie
Last edited:
Hi,
After flashed V7.0 on my MAX3 (MIUI12, no root), I did not see any new apps installed. By CPU-Z, I can see max possible frequency was changed to 2.21G. My question is how can I change governor and use the new added feature: Headphones sound gain control.
Thanks.
After flashed V7.0 on my MAX3 (MIUI12, no root), I did not see any new apps installed. By CPU-Z, I can see max possible frequency was changed to 2.21G. My question is how can I change governor and use the new added feature: Headphones sound gain control.
Thanks.
They're released at github already
Good to hear it
Good to hear that your battery now lasts longer. I'll release fixed version soon with new features. Most likely this weekend :good:For info, I flashed v7.0, also got a corrupted sd-card message (32Gb), flashed the above fix and the card is functioning again. (I first tried the fix on its own, but the WiFi didn't work, so it had to be the main release, followed by the fix.)
Early impressions are that this kernel has a very noticeable effect in reducing battery usage.
Well done. Thanks for your work.
Xiaomi Mi Max 3, MIUI 12 (Android 10), latest weekly update.
You can tweak the kernel via SmartPack Kernel Manager from play store. I'll release fix this weekend Most likely
You need to install SmartPack kernel manager from play store to tweak the kernel and use other tweaks
This kernel makes my phone more responsible and lasts longer. Waiting for the next update. On Miui 12 Rom
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
35I would like to present you first kernel for nitrogen for Pie ROMS (MIUI+GSI)
Installation steps:
1)Download latest kernel zip
2)Reboot to recovery
3)Mount vendor partition in recovery
4)Flash kernel zip
5)Wipe cache+dalvik-cache
6)Reboot
Features:
-Overclock+Underclock+Undervolt
-sdFAT(exFAT) support
-KCAL
-Governors: cultivation, nightmare, darknessV5, darkness, alucard
-Maple I/O scheduler
-GPU undervolt
-CRC on/off support
-FSYNC on/off support
-Fast charge via USB port
-Wireguard
-Power Efficient Workqueue by default
-Headphones sound gain control
-Microphone gain control
-320K AAC encoding (for audiophiles mostly)
-Powersuspend!
-many power efficient workingueues patches
-ZRAM/SWAP disabled by default
Feel free to join to my Telegram group where you will get available ROMs list, fixes and latest test versions of ResurrectedKernel! :
JOIN!
IM NOT RESPONSIBLE FOR ANY PROBLEMS OR BUGS THAT MIGHT HAPPEN WITH YOUR DEVICE
XDA:DevDB Information
ResurrectedKernel, Kernel for the Xiaomi Mi Max 3
Contributors
mario_R
Cirno/remicaa- big help with sources
afr- bringup kernel source upstreamed to 4.4.180
Makshow- tester
opasha- tester
Source Code: Click
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: ----
Stable Release Date: ----
Current Beta Version: v5
Beta Release Date: 2019-04-28
Created 2018-09-15
Last Updated 2019-04-2816v5 has been out!
It's been a while since i've uploaded last version V4. Today it's time for the V5 release with many modifications. V5 still have some issues on latest MIUI developer versions, but from today I'll work on fix for that issue. So if you are on MIUI stable release or some older MIUI developer version (like 9.3.21) then check this update out
Here is the changelog:
-added KCAL
-Governors: cultivation, nightmare, darknessV5, darkness, alucard
-Maple I/O scheduler (from now it's set as default since it offers best file system performance)
-GPU undervolt (saves battery juice without impact on performance)
-CRC on/off support (off by default for better performance)
-FSYNC on/off support (off by default for better performance)
-Fast charge via USB port
-Wireguard
-Power Efficient Workqueue by default
-Headphones sound gain control
-Microphone gain control
-320K AAC encoding (for audiophiles mostly)
-Powersuspend!
-many power efficient workingueues patches
-ZRAM/SWAP disabled by default
What governors combo do I use? Alucard for little cores and interactive for big cores
13RRK V6
V6 version is out guys! Check it out! This version will work with any rom with beta firmware. Tomorrow I'll release version with support for roms with stable firmware (for people using stable xiaomi.eu variant)
Changelog:
V6:
-kernel upstreamed from 4.4.153 to 4.4.183 (thanks for @afr30010)
-Westwood TCP added and set by default (you were waiting for it quite long xD, sorry)
-GPU: unlock 19MHz for idle state
-improvement: system will now boot with maximum CPU frequency
-undervolted 1.1GHz/1.8GHz/2.1GHz/2.2GHz frequencies to reduce power consumption and potential fast throttling
-default pwrlvl for GPU changed from 2 to 3 (now GPU can sit down to 160MHz instead of constantly running at 266MHz even when it's not necessary)
-CRC check enabled by default (protect data when you get random crash reboot)
-improvements for RAM utilization
-improvements for CPU when it's in idle state
-Wireguard updated
This version doesn't support official MIUI ROMs. If you flash it and it works like it should then it's fine, if not- don't report it here.
Custom MIUI ROMs like xiaomi.eu, MIUIPro, mi-globe etc.. should be fine. But remember that I'm compiling this kernel mostly in mind for AOSP based ROMs
This version includes my configuration preset for kernel which is applied whenever you boot into system. What does it tune:
-readahead for internal storage set by default to 3072kB instead of 5112kB for better performance
-minimum CPU frequency set to 300MHz
-maximum frequency set to 1800MHz for little cluster and 2208MHz for big cluster
-little cores are using alucard governor
-big cores are using interactive governor with fine tuned values
So for now the kernel is like "flash and forget". You dont have to tune it if you want to run with my configuration what i use daily. If you're an advanced user, then you know what to do- any kernel manager and tune the kernel for yourself
About that 19MHz for GPU- if you want to use it then you need to switch GPU governor for simple_ondemand (which i do, but didn't set it by default in my kernel preset because some users might not like it) or if you want to still use default msm_adreno_tz governor then you need to set "pwrlvl" value to 4. If you won't do any of these then you'll run with 160MHz as minimum frequency.
12Reserved
Every version is tested before pushing it on XDA
Changelog:
V7.0:
-Android 10 support
-MIUI and GSI compatible
V6.2:
-kernel updated to 4.4.189 version
-added missing touch drivers (thanks to @afr30010)
-added version for MIUI STABLE
V6.1:
-wireguard updated
-reverted CPU voltages to the previous state (unstability fix for some users)
V6:
-kernel upstreamed from 4.4.153 to 4.4.183
-Westwood TCP added and set by default
-GPU: unlock 19MHz for idle state
-improvement: system will now boot with maximum CPU frequency
-undervolted 1.1GHz/1.8GHz/2.1GHz/2.2GHz frequencies
-default pwrlvl for GPU changed from 2 to 3 (now GPU can sit down to 160MHz instead of constantly running at 266MHz even when it's not necessary)
-CRC check enabled by default
-improvements for RAM utilization
-improvements for CPU when it's in idle state
-Wireguard updated
-mine kernel presets when system boot up
More info here CLICK
V5.1:
-fix for sound+videos on latest beta MIUI versions
V5.01:
-re-enabled zRAM and SWAP as some users complain about low memory with a lot of apps in background on 4GB RAM variant
V5:
-added KCAL
-Governors: cultivation, nightmare, darknessV5, darkness, alucard
-Maple I/O scheduler (from now it's set as default since it offers best file system performance)
-GPU undervolt
-CRC on/off support (off by default for better performance)
-FSYNC on/off support (off by default for better performance)
-Fast charge via USB port
-Wireguard
-Power Efficient Workqueue by default
-Headphones sound gain control
-Microphone gain control
-320K AAC encoding (for audiophiles mostly)
-Powersuspend!
-many power efficient workingueues patches
-ZRAM/SWAP disabled by default
V4:
-ResurrectedKernel for Pie ROMs, same features as the Oreo version
-new features coming soon!
-update: sound doesn't work on latest miui 9.3.28 and latest stable
V3:
-added sdFAT (exfat) support
-undervolt (as you wanted me to do it few days ago) up to -500000 uV (depends on frequency)
V2:
-Overclock both big and little cores
-Underclock for more battery juice
-WiFi fixed
V1:
-- Initial release
