[KERNEL][VANILLA][11/10] EternityProject Kernel 3.4.37 v1.0b | NEW BASE! |

Search This thread


Senior Member
Dec 31, 2009
Petaling Jaya
Hey guys!
I'm sorry, I've had some personal problems.... and sincerely I still have a lot of them...

....Anyway, remember the HUGE stability patch?

That will require A LOT of time, I've undervalued the situation (and yeah, that's an error that shouldn't be done) and from what I've seen, it's still too much early to build something like that. We'll proceed on a constant-mixed-updates basis, probably.
Surely, having a way to open an UART and see the early printk would speed this up of like ~900%, but we don't have that for now and unfortunately I have to develop with what we have. (Ehm, nope, the last_kmsg isn't of any help to me while developing that patch)

What I promised some days ago was to re-stabilize the video drivers... and that's something that I've probably done now (needs some testing, but I'm almost sure it's solved) and well, yeah, I'm about to release a new version with also other changes. Like always, you'll see the changes into the changelog as soon as it will be available (I think I should be done with it in a couple of hours, but I can't promise you all that I'll release it today and not tomorrow).

The calculation of the "final" RAM frequency is (stated_frequency * 2) ... so, 533*2=1066MHz --- 667*2=1334MHz (1300).

See you soon!

EDIT - 10:30PM:
I've seen that apart the main update I was doing on the huge patch, a lot of the other commits I did on the kernel can be applied and they're working just fine. Let's delay the release to tomorrow: that will be A LOT better! :p
P.S.: I also have to download and install Visual Studio on my laptop for releasing it with the auto-repacker... and it's a bit late right now!

EDIT - 23/07 16.30
New version released!
For further informations, check the changelog!

The EternityProject Team Manager & Main Developer,

Hi Kholk,

Been tested the kernel for 3.xx so far what i notice it reduce heat on my HOX , but .. i got few random freeze/hang while browsing internet.. other than it awesome.. will continue on testing for few days.. anyway great work u got there mate.. thanks

Sent from my HTC One X using xda premium


Retired Recognized Developer
May 20, 2007
Thanks for the reports guys! However, a last_kmsg would help me to know what's going on with your devices and will possibly make me able to fix the issues.

v0.27b has been released.
This version fixes a severe baseband bug that in rare particular circumstances was causing an hardlock with subsequent device reboot (by watchdog).
That bug was also breaking the device shutdown procedure, due to the bad modem shutdown sequence.


The EternityProject Team Manager & Main Developer,
Last edited:


Retired Recognized Developer
May 20, 2007
I know about the WiFi problem. It happens when sending the device to standby and this problem hasn't been solved, still.
0.27b solves only a baseband problem.

Please, remember that the 3.4.0 series is still a work-in-progress, still not declared fully stable: problems may appear and will be solved sooner or later.
If you want a fully stable solution, please go on the 2.6.39 series.
Last edited:
  • Like
Reactions: madenssblade


Senior Member
May 28, 2009
No usb host without external power source is not possible at the minute but the phone supply mhl adaptor with the power to work without a mains power source

Sent from my HTC One X using xda app-developers app
Last edited:


Retired Recognized Developer
May 20, 2007
Uhm.... Heavy thing.
But since I usually play my electric guitar using an X-Fi and since (even if rarely) I play also with professional sound instrumentations, I can understand your need to have 96kHz.

Sincerely, I don't know if the audio codec in there is capable of doing that... let me take some minutes for verifying the capabilities of our HW and I'll get back here with a better reply.

Bad news for you.
Our Texas Instruments TLV320AIC3008 supports only up to 48kHz :(
Last edited:


Senior Member
Sep 6, 2010
Uhm.... Heavy thing.
But since I usually play my electric guitar using an X-Fi and since (even if rarely) I play also with professional sound instrumentations, I can understand your need to have 96kHz.

Sincerely, I don't know if the audio codec in there is capable of doing that... let me take some minutes for verifying the capabilities of our HW and I'll get back here with a better reply.

Bad news for you.
Our Texas Instruments TLV320AIC3008 supports only up to 48kHz :(

Thx for checking :)

Gesendet von meinem HTC One X

Top Liked Posts

  • There are no posts matching your filters.
  • 122
    Welcome to the EternityProject's Kernel for HTC Endeavor / One X Thread!

    What is it?
    It is a custom kernel with some updates and optimizations on Tegra3 platform and Cortex A9 MPCore management drivers.

    Why should I flash it?
    You should flash it only if you know what are you doing. Remember that it works only on an unlocked HTC One X.
    If you know what are you doing, you shouldn't ask this question.

    How to flash:
    1. Copy the archive
    2. Flash via CWM! (Note: HBOOT 1.72 REQUIRED)

    -- Dynamic overclocking
    -- EternityProject HybridFrequency
    -- USB HOST Mode finally working!
    -- Memory and cache management optimizations
    -- Modified Cortex-A9 (Tegra 3 core)'s cache behavior.
    -- Latest Tegra drivers
    -- Deadline I/O Scheduler as default
    -- Kernel base: 3.4.37
    Great results on tests.

    - Integrated WiFi firmware in kernel package
    - Switched to new (vanilla) kernel base (Linux 3.4.37)
    - Endeavor#U board reimplemented
    - Tegra support implemented on vanilla kernel
    - Multiboard support (LGE X3 supported)
    - Switched to Device-Tree (appended)
    - Removed tegra-pinmux, replaced by Linux pinctrl
    - Switched to gpiolib
    - Implemented EternityProject HybridFrequency
    - Updates to eprjdemand (faster, lighter.. better!)
    - Updates to EternityProject Tegra 3 CPUManager
    - T3CPUMan's algorithms have been optimized
    - Less HEAT!
    - Stabler USB Host
    - Alarms now working correctly
    - IRQ wakeups now working correctly
    - Android 4.3 kernel changes implemented
    - pinctrl updated to linux 3.10 for compatibility reasons
    - CPU Load calculation now working correctly
    - CMA now working correctly
    - Overclocked and Regular kernels are no more
    - Almost FULL DVFS control allowed with EternityTweak (dl it from Play Store!)
    - Other things I may be forgetting....
    ------ OLD KERNEL BASE -------
    - Include correct WiFi drivers into the package
    - eprjdemand: Tweak some parameters, make it more performance-friendly
    - kholk: Happy birthday! :P
    v0.99 -- MAJOR RELEASE
    - New feature: EternityProject Tegra 3 CPU Manager
    - EternityProject eprjdemand: Tuneup for less battery power usage
    - EternityProject eprjdemand: Fix some bugs and simplify code
    - EternityProject eprjdemand: New intermediate threshold for better battery
    - EternityProject sysfs Tools: Add DVFS(GPU/CORE) voltage/frequency userspace management
    - EternityProject Scheduling Helper: Add power management
    - EternityProject Scheduling Helper: Optimizations
    - New power management features
    - Block: Optimize I/O operations latency
    - NFC: Fall back to the old hTC driver for compatibility purposes
    - EternityProject ChargerBoost: Add more 1A-forcing code
    - Battery driver: Fixed some calculation bugs
    - Baseband driver: Light speedup
    - Add new API: pinctrl
    - endeavoru-power: Convert to the new PM API
    - ARM: Initialize whole RAM early
    - More safety code for SoC voltages
    - Optimized TLB flushing
    - Optimized deadline I/O scheduler
    - Audio processing on AVP instead of CPU
    - Implemented CPUQuiet by nVidia (disabled - developers only)
    - Tegra: Wakeups: Restructuration
    - Tegra: IRQ: Use one IRQ for multiple wakeup sources
    - Tegra: GPIOs: Convert to platform device and optimize
    - Tegra: GPIOs: Cleanup hTC's and nVidia's mess
    - Tegra: Pinmux: Convert to platform device
    - Tegra: Restructure very-early init
    - ARM: SoC: Use scatterlist chaining
    - ARM/Tegra: Implement device-tree support for most Tegra devices
    - endeavoru: Fine-tuning for display settings (fix that retarded upper band update)
    - endeavoru: Fix slow wakeup from display off (BEST with eprjdemand)
    - endeavoru: Fix USBHost for the 1000th time (eh..)
    - eprjdemand: Don't make large jumps on frequencies
    - eprjdemand: Fix an occasional and really bad division-by-zero
    - Block (drivers layer): Linux 3.4 (meh, forgot it!)
    v0.85 -- MAJOR RELEASE
    - Enable 51MHz frequency while device is awake
    - 51MHz is now being really used by the device
    - Move EternityProject’s Hotplug bits from eprjdemand
    - Tegra Auto-Hotplug: EternityProject Hysteresis management
    - Discard some code in nVidia’s Auto-Hotplug in favor of EternityProject’s code
    - eprjdemand: add code for better handling of the device-resume case
    - eprjdemand: some stabilization
    - cgroup: Solved errors in logcat
    - Frequencies: Solve MAX frequency (re)setting problem
    - GPU: Some updates taken from the latest Tegra l4t release (smoother)
    - Audio: Process audio on AVP when possible
    - endeavoru display: Use correct display parameters.
    - cgroups: Linux 3.4
    - cfs: Linux 3.4
    - jump_label: Linux 3.4
    - USBNET: Linux 3.4
    - FUSE: Linux 3.4
    - NFS: Linux 3.4
    - lockd: Linux 3.4
    - freezer: Linux 3.4
    - IPv4: Linux 3.4
    - IPv6: Linux 3.4
    - Netfilter: Linux 3.4
    - Netlabel: Linux 3.4
    - Netlink: Linux 3.4
    - NET Sched: Linux 3.4
    - ipx: Linux 3.4
    - sunrpc: Linux 3.4
    - NFC: Linux 3.4
    - Ethernet: Linux 3.4
    - key: Linux 3.4
    - bridge: Linux 3.4
    - sctp: Linux 3.4
    - 802, 8021q: Linux 3.4
    - packet: Linux 3.4
    - dcb: Linux 3.4
    - dsa: Linux 3.4
    - NET infrastructure: Linux 3.4
    - NET infrastructure (drivers layer): Linux 3.4
    - timerfd: Linux 3.4
    - FS (whole infrastructure and components): Linux 3.4
    - QNX6: Add support
    - kmod: Linux 3.4
    - TOMOYO: Linux 3.4
    - Capabilities: Linux 3.4
    - PM: Suspend: Linux 3.4
    - Security: Updates
    - usermodehelper: Updates
    - PM: Updates
    - TTY: Updates
    - syscalls: Updates
    - RTC: Updates
    - signals: Updates
    - IRQ: Updates
    - New feature: EternityProject ChargerBoost!
    - Sleep problems FIXED
    - Crazy CPUs up/downlining FIXED
    - USB: Updates
    - MHL: Update to hTC's 2.17 release
    - GPU: Picked some interesting stuff from hTC's 2.17
    - Camera: Picked stuff from hTC 2.17
    - Rawchip: Picked stuff from hTC 2.17
    - Audio: Picked stuff from hTC 2.17
    - I2C: Updates
    - PM: updates
    - Audio + ASoC: Update
    v0.60 -- MAJOR RELEASE
    - Scheduler: Update to Linux 3.4
    - Scheduler: Optimizations
    - Some updates to ARM low-level
    - Support for ARM Kernel Auditing
    - Block layer updated: Linux 3.4
    - FAT FS updated: Linux 3.4
    - UDF FS updated: Linux 3.4
    - Updates to baseband driver
    - MMC: Updates
    - proc: Linux 3.4
    - lowmemorykiller: Linux 3.4
    - jump label: Linux 3.4
    - workqueue: Linux 3.4
    - memcg: Linux 3.4
    - vmscan: Linux 3.4
    - mmap: Linux 3.4
    - writeback: Linux 3.4
    - tmpfs: Linux 3.4
    - memblock: Linux 3.4
    - ARM: mm: Updates
    - generic FS: Updates
    - Final and proper WiFi FIX
    - SIO: Removed
    - Save some CPU by silencing some drivers
    - (OCVER) Better voltage management.
    - Re-gain compatibility with HTC Sense
    - Updates to GPIOs
    - Other updates to IRQ
    - Updates to Tegra IO
    - Updates to pinmux
    - Updates to kernel image generation
    - Updates to very early boot process
    - Regulator - tps80031: updates
    - ASoC (audio) Core: Updates
    - Audio: enable 24-bit and 32-bit playback
    - GPU: Video drivers updated to latest nVidia revision
    - ION: General updates
    - IRQ: Finally decrease of 90% the IRQ hogging
    - IRQ: General updates
    - GIC: General updates
    - Some refactoring of the Tegra PM layer
    - PM: Add Power Management Domains
    - Updates to block/fs/security (now working good)
    - Remove unwanted commits of the previous release
    - Update GPS driver to the latest TI revision and fix crash
    - Removed min frequency for audio playback/record
    - Other updates to FS base
    - Updates to block layer
    - Updates to Security layer
    - Solve 95% of the freeze-softlock-omgslow cases
    - Initial Device Tree support for later conversion
    - Updates to cgroup
    - Updates to epoll
    - Updates to scheduler (CFQ)
    - Updates to genirq
    - Updates to FS base
    - Updates to ptrace
    - Integrate LP CPU userspace voltage control
    - Tegra-i2c: updates for avoiding bad sections
    - SMP: various updates for faster boot
    - cgroup: finally use the correct data type umode_t
    - EternityProject SleepLock: safer operations
    - EternityProject sysfs Tools driver: better coding
    - eprjdemand governor has been tuned. Less heat.
    - New driver: EternityProject sysfs Tools
    - New feature: SleepLock (lock to LP mode)
    - New feature: WiFi user-customizable WakeLock
    - Fix: WiFi won't drop while display is off (default)
    - New performance feature: Cross Memory Attach
    - eMMC Performance Tuning
    - Thumb-2 related updates
    - ARM Kprobes: Linux 3.4
    - ARM: Implement jump labels (still deactivated)
    - Various minor updates on modules generation kernel scripts
    - (OCVER) +25mV to the four last frequencies (1.7GHz = 1325mV)
    - Introduce EternityProject HSMGR modification for Jellybean
    - Various cleanups
    - Introduce NULL-PokeCPU for STFU'ing the camera library
    - Official initial release supporting CM10-EPRJ
    - Fix a rare KP problem
    - Release the OC version
    - (OCVER) Use the EternityProject Custom Thermal Protection
    - (OCVER) Singlecore: 1.7GHz - Quadcore: 1.6GHz
    - WiFi "dying after suspend" problems FIXED
    - NTFS driver is now built-in
    - Some minor updates to mm
    - Page writeback: updates
    - EXT4: Update to Linux 3.4
    - EXT3: Update to Linux 3.4
    - EXT2: Update to Linux 3.4
    - JBD: Update to Linux 3.4
    - JBD2: Update to Linux 3.4
    - XFS: Update to Linux 3.4
    - NTFS: Update to Linux 3.4
    - RAMFS: Update to Linux 3.4
    - PSTORE: Update to Linux 3.4
    - Tested also with CM9 and CM10 (requires repacking)
    - New CPUFREQ governor added: eprjdemand
    - Update kernel build process (better zImage generation)
    - Update kernel scripts (solve some bugs with some distros)
    - Fix gamma-c case on Sharp panels for machine endeavoru
    - Reduced IRQ hog on headset plugging
    - Bug prevention: Don't put up an already-up CPU
    - Tegra video drivers: Fix badnesses while playing low-res videos
    - Note: Some of the updates were taken from hTC's 1.29 release.
    - Fixed a severe baseband bug
    - FIXED: Exiting from airplane mode won't make the device to reboot
    - Reverted some video drivers changes (should be stable now)
    - Change the task-to-core association way of the scheduler
    - SMT and MC scheduler has been re-enabled (multicore enhancements)
    - Kernel command-line concatenation now possible (developers only)
    - L2x0 Cache Controller: Fixed some bugs and little speedup
    - High-Resolution Timers: various updates
    - Various stability enhancements
    - (WINDOWS) Kernel Flasher App: Fix device recognition
    - (WINDOWS) Kernel Flasher App: Kill ADB server prior flashing
    - (WINDOWS) Kernel Flasher App: Better user-debugging
    - (WINDOWS) Kernel Flasher App: Fix a rare hanging case
    - Now we can reach 520MHz on the GPU.
    - Various updates to i2c and input
    - Tegra drivers (cpu, clock, clocksource, dvfs etc) fully updated to v15r7.1
    - Some updates to AVP, SMMU and Tegra GPU drivers
    - Baseband: some updates to power sequence and shutdown
    - Implemented SoC-to-DDR bitswap
    - Raised DDR frequency as per chip specs [667MHz]
    - Raised the GPU maximum frequency to 520MHz
    - USBHost: You can now unplug/plug your devices without restarting Host Mode!
    - Added Windows Kernel Repacker
    - WiFi connection drop problems SOLVED!!!
    - WiFi AP working
    - Updates to ARM GIC
    - Updates to Timers
    - Updates to ARM IRQ management
    - Updates to Kernel IRQ management
    - CPUFREQ updated to mainline 3.4
    - Modified cpu-tegra behavior for new CPUFREQ drivers
    - Tuned frequency ramp-up when event (touchscreen etc) occurs.
    - Re-FIXED USBHost that I've broken in v0.24 (sorry xD)
    - Updates to Wireless core
    - Updates to NET core: speedup
    - debugfs: performance improvements
    - page allocator updated: performance improvements
    - mmc updated: stability and performance improvements
    - syscalls updated: stability and performance improvements
    - USB core updated: more stability
    - PM updated: battery improvements
    - filesystems: various updates and great speedup to procfs
    - sysctl updated: Ensure compatibility and slight speedup
    - netlink updated: more stability
    - crypto updated: new functions, some performance improvements
    - WiFi issues: Disable reconnect-while-connected (should fix some connection drops)
    - Updates to USB core
    - Enhanced stability
    - More compatibility for HTC Sense ROMs
    - USB Host Mode is now working
    - Optimized I/O on eMMC
    - WiFi: Custom modifications for One X hardware bugs
    - Added ARM errata 743622
    - Updates to ThumbEE
    - Updates to identity mapping
    - Custom modifications to Tegra Power Management driver
    - Updates to ARM unwinder and floating point unit
    - Updates to Android staging drivers
    - Fixed Linux flash script
    - Updates to ALSA (sound core)
    - Updates to ASoC (SoC  audio)
    - Updates to some ARM assembler
    - Updates to network core infrastructure
    - Updates to mac80211/nl80211 and wireless core
    - Updates to IPv4, IPv6, TCP, netfilter
    - Some fixes to ION and Tegra SMMU
    - Actualizations to Power Management QoS layer
    - Some updates to ftrace
    - Custom WiFi drivers, goodbye, hTC s..t!
    - 0DAY FIX: no more permission denied(s) and no more freezes at all!
    - IRQs problem fixed.
    - Better battery life.
    - LOTS of things to update to the proper version.
    - Software preview released.

    Changelog 2.6.39:
    - Useless debugging taking kernel time removed (hTC: brrrrr....)
    - Some updates to OOM
    - Updates to regulators
    - Updates to RTC
    - Updates to Tegra Crypto HW driver
    - Some updates to memory management
    - Updates to GPIOs
    - OTG Host ID is now recognized by the device (Host still not working)
    - [IMPORTANT] Fix RCU stalls on SMP platforms
    - Convert GIC library to use the IO relaxed operations
    - Introduced and enabled Tegra Mediaserver driver on kernel
    - Implementation of Tegra IOMMU management by HW
    - Force ION Memory Allocator for board-endeavoru (/dev/ion enabled)
    - Update ION Memory Allocator to the latest revision
    - Fix to ondemand - up_threshold will not go to 50 automatically
    - Fix to ondemand - stats are being saved (G->LP) and resumed (LP->G) on cluster switch
    - Some updates to inode and superblock
    - Tegra Audio should consume less battery now
    - AVP can have multiple clients - HW rendering of videos (still disabled for now)
    - Introduced (still disabled for now) Tegra AVP Media Offload Engine
    - Introduced GART driver
    - Updates to Tegra i2c driver (for accelerometer and other i2c devices)
    - Minor cleanups to the Tegra GeForce ULP GPU driver
    - New feature: ION Memory Allocator for GPU
    - Better CPU Scaling
    - BT File receive issue solved
    - Added /proc informations about SKU (initial implementation - not really working)
    - Entirely updated Tegra drivers to the latest Android Tegra revision
    - Cleaned up and updated the baseband (radio) driver to the latest revision
    - Clock (drivers/clk) layer updated to Linux 3.4
    - VFP management updated from Linux 3.4-rc6 to Linux 3.4 (final)
    - Some updates to signals and ptrace 
    - Some updates to CPUIdle
    - Removed some hTC useless debugging features that were using some IO and CPU time.
    - Reverted v0.90b changes :(
    - Fixed WiFi
    - Voltage Control works for setting voltages
    - Voltage Control works for setting voltages
    - LEDS layer updated to Linux 3.4
    - FAT FS drivers half-updated
    - ARM Kernel initialization layer half-updated
    - Huge changes, 200 commits.
    - Added ZCACHE and CLEANCACHE from Linux 3.4
    - Updated ext4 fs driver to Linux 3.4 version
    - Updated some other memory management code to Linux 3.4
    - Removed some hTC debug $h!t (thanks TripNRaVer)
    - Added userspace voltage control
    - Updates to Tegra3 drivers
    - Added Voltage control (thanks richardtrip!)
    - Init layer updated to Linux 3.4
    - Cleaned up RCU
    - IOWAIT problems should be fixed now
    - Included a Linux and OSX script for flashing
    - Some minimal updates to EXT4
    - Some minimal updates to Memory Management
    - Solved v0.80 problems
    - Easy flashing process
    - RCU entirely updated to Linux 3.4-rc7 version
    - Performance improvements
    - Reliability improvements
    - Updated Memory Management (most of) to Linux 3.4-rc6 version
    - CPUIDLE optimizations
    - New SHA implementation (faster)
    - ARM CPU Topology implemented
    - ARM MT Scheduler ported and enabled (better on real-life usage)
    - Speedup the SMP management
    - Lowered the minimum CPU voltage for better battery
    - SLAB updated
    - Add Simple I/O Scheduler and set it as default
    - VFP layer updated to Linux 3.4-rc6 version
    - Other stability fixes
    - Removed some unused code
    - Faster CRC32 implementation
    - Optimized memcpy and memmove
    - Some updates to IDR
    - lowmemorykiller: optimizations and cleanups
    - Rebase. OTG Enabled, Stable kernel.
    - V/R I/O Scheduler as default
    - Some stability fixes.
    - USBHost OTG Mode is ENABLED
    - Optimize Deadline I/O Scheduler
    - Introduce V(R) I/O Scheduler
    - Use NEON Optimized memcopy
    - Optimize compilation for Tegra 3
    - Introduce endeavoru_eprj_defconfig
    - Tweaked Tegra 3 G/LP latency

    Try our feature - EternityProject CPU Manager w/ EternityProject HybridFrequency (already activated) with eprjdemand governor for the BEST battery life!

    3.4 Download:
    EternityProject Kernel 3.4 for HTC One X: EternityProject Website

    Using the new EternityProject Features:

    EternityProject ChargerBoost:
    By default, your devices allows to get 1A current only from AC adapters. With EternityProject ChargerBoost, you can allow the device to take 1A (fast charge) from your PC's USB, too!
    Enable ChargerBoost: echo 1 > /sys/eprjmanager/charger_boost
    Disable ChargerBoost: echo 0 > /sys/eprjmanager/charger_boost

    NOTE: DETACH your USB cable prior enabling/disabling ChargerBoost, otherwise it won't work!

    EternityProject PowerLock (lock in LP mode!):
    Lock in LP mode: echo 1 > /sys/eprjmanager/power_lock
    Unlock to auto G/LP: echo 0 > /sys/eprjmanager/power_lock

    EternityProject Benchmark Mode:
    echo 0 > /sys/module/eprj_t3_cpumanager/parameters/auto_hotplug
    echo 1 > /sys/devices/system/cpu/cpu0/online
    echo 1 > /sys/devices/system/cpu/cpu1/online
    echo 1 > /sys/devices/system/cpu/cpu2/online
    echo 1 > /sys/devices/system/cpu/cpu3/online
    echo 1 > /sys/eprjmanager/friedeggs

    P.S.: Commands to be entered on Terminal Emulator, Script Manager (maybe), or ADB.

    NOTE: Since there are plenty of ROMs, all using a different ramdisk from each other, prior complaining about "kernel not working", REPACK the kernel with your ROM's ramdisk.
    Note 2: If something doesn't work, try to WIPE your CACHE!

    EternityProject is now self-hosted!
    ICS kernel source: http://www.gitorious...kernel-endeavor
    Current GIT repositories: http://pubgit.eternityproject.eu

    Donations received:
    6K680223E1030333L - 6.00USD - lukemo
    0UY37274TC1103825 - 10.00 EUR - boshot
    79A91437HG8627136 - 5.00 EUR - ???????
    6CC71999F2968203P - 5.00 USD - ???????
    00D78221UD555862L - 50.00 USD - j4n87
    4LE60170CG194064V - 5.00 EUR - ???????
    5N288279RG209915G - 20.00 USD - eyosen
    2FS83196MB691023J - 5.00 EUR - n3ocort3x


    The EternityProject Team Manager & Main Developer,
    @ORStoner, angusc
    Strange, it's happening to me too. I'm making some other progress and some studies on USBHost (its reliability) and on our endeavor#U mainboard that I want to keep for me at least for now... because I don't know how this will end up and what will I discover from my researches.

    By the way, I've analyzed the LCD module in our phone, and... okay, some (everyone I'd say) of you were experiencing some strangeness on the upper of the LCD, mostly noticeable while scrolling up/down the menus in landscape orientation.
    After my analysis, I've ended up finding the correct display parameters to manually set and use and the issue has disappeared here.

    Also, we're making eprjdemand better and better everyday and slowly reimplementing the Tegra SoC in our kernel so that we'll end up to be conformed to the mainline Linux, making new kernel versions porting really easier compared to what we did for Linux 3.4 this time.

    Actually, we've half-solved that somehow-slow-resume-from-sleep problem: I mean, it still takes something like 1 second. It's anyway better than the current behavior found in v0.85.

    There will be other changes too in the next version: I hope I'll be able to release it tomorrow, but I don't really know if I'll be able to make the new changes that we have in mind that fast.

    Oh, another thing.
    As you may have noticed, I've slowed down the release-time: please, don't think any bad thing. We're only making better tests and really ... extremely hard changes, so, that's why it's taking some more time.

    The EternityProject Team Manager & Main Developer,
    we need a realy dev on the kernel module... not an alpha version.... this kernel is not better as the stock... only freezes and cant play musik...

    I suggest you stop complaining.

    He is doing this for free in his own time.

    Please dont do this again or suffer the consequences.

    @OP thx for your quick response on my fix registration request ;)

    Forum Moderator
    I've put the site back online. Sorry for the inconvenience.

    Sorry for all this time without any release.
    As you might know, we've had lots of problems and...well, since university began again, I haven't got "excessive" free time like this summer.
    We've solved the various problems that were making us unable to release the software (releasing something broken isn't really good, eh?) and the kernel testing got to a positive end exactly today.

    The new feature was really difficult to implement (and to tune), mostly because it wasn't something that could be verified "just reading code", but something to be verified with real life device usage and this required lots of time (and lots of bad words :p).
    By the way, while testing&fixing it, we also took some time for going on with other kernel work, also adding the feature someone asked for: the GPU userspace frequency and voltage control.
    Last but not least, we've lowered _again_ the boot times and raised the efficiency on some common CPU operations..... and "somehow" raised the battery duration ;)

    Now, I won't say anything else because I don't want to write a 30 pages poem: you'll find the changes in the changelog when the next version will be published.

    Anyway...... official announcement!

    I've got a release date.
    Tomorrow, 29/10/2012, around 2.30PM (GMT+1), we will release the new EternityProject Kernel 3.4 for hTC One X, v0.99 (yeah, .99 .. take it as Release Candidate), the new CM10-EPRJ ROM...
    Two other things I won't tell you right now :)

    Forcing myself to stop writing now :p

    The EternityProject Team Manager & Main Developer,
    kholk, are you planning on a balanced kernel (performance and battery life) or are you leaning more one way or the other?

    This is the first time I've had an Android phone without a user replaceable battery so with consideration to the power already bestowed upon the One X by the Tegra 3 I would like to encourage leaning more towards battery savings.

    For now, I'm planning to give to the kernel some performance optimizations that won't absolutely change the battery usage of the device.

    After finishing with the basic optimizations, I'm planning to distribute two versions of the kernel. One will be overclocked, one won't.... so, one incentrated on power saving and one on maximum performance.

    Oh, v0.54 has been released!
    It features some improvements on the Android lowmemorykiller, nothing CRITICALLY important, but still something useful as the One X is strangely low on memory, especially on stock ROMs.

    This will improve the fluidity of your system when you've got A LOT of open active applications.

    I probably won't release anything tomorrow: it'll be an absolutely bad day for me. Out for the whole day.


    The EternityProject Team Manager & Main Developer,
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone