Volt is no longer being maintained
Disclaimer
--I am not responsible for bricked devices, dead SD cards, thermonuclear war,
--or you getting fired because the alarm app failed.
Introduction
Uh undervolt uh overclock uh stuff. Yeah
I cannot guarantee that your device will be stable as each chip handles undervolting and overclocking in different ways. If you experience a crash when the cpu is under full load, then that means the voltage is too low for your chip. I have run into that issue and so have my testers and I raise the voltage a tad each time until a majority is stable.
Undervolt is between -100mv to -200mv on the big and little clusters and gpu is -100 to -200mv.
Why the range? Because each frequency has its own voltage level set and has been tweaked.
Features
**Undervolt CPU by -136mv to -226mv
**Undervolt GPU by -100 to -200mv
**Overclock and Underclock
** GPU underclock to 180mhz
** Backlight Dimmer
** Sound Control
(2208mhz and 2304mhz are separate kernels as not everyone can handle those speeds, I personally cannot but a few of my testers could)Still available in old versions but no longer supported
Important
Not everyone will be stable with the undervolts and overclocks but most should be.
For the people who are trying 2208mhz and 2304, The voltage for 1900mhz and above is set to 1.056v (stock) while v2 (2112mhz) is running at .95v
Also for the people running 2208 and 2304, you lucky f**ks....... I cant get over 2112
Telegram Group
Source will be updated soon when I have time
XDA:DevDB Information
Volt, Kernel for the OnePlus 5
Contributors
Zombie
Source Code: https://github.com/UndeadDeveloper/Volt-OP5-OOS-SimpleGX
Kernel Special Features: Undervolting, Overclocking
Version Information
Status: Beta
Created 2017-08-24
Last Updated 2018-04-12
--I am not responsible for bricked devices, dead SD cards, thermonuclear war,
--or you getting fired because the alarm app failed.
Introduction
Uh undervolt uh overclock uh stuff. Yeah
I cannot guarantee that your device will be stable as each chip handles undervolting and overclocking in different ways. If you experience a crash when the cpu is under full load, then that means the voltage is too low for your chip. I have run into that issue and so have my testers and I raise the voltage a tad each time until a majority is stable.
Undervolt is between -100mv to -200mv on the big and little clusters and gpu is -100 to -200mv.
Why the range? Because each frequency has its own voltage level set and has been tweaked.
Features
**Undervolt CPU by -136mv to -226mv
**Undervolt GPU by -100 to -200mv
**Overclock and Underclock
** GPU underclock to 180mhz
** Backlight Dimmer
** Sound Control
Important
Not everyone will be stable with the undervolts and overclocks but most should be.
For the people who are trying 2208mhz and 2304, The voltage for 1900mhz and above is set to 1.056v (stock) while v2 (2112mhz) is running at .95v
Also for the people running 2208 and 2304, you lucky f**ks....... I cant get over 2112
Telegram Group
Source will be updated soon when I have time
XDA:DevDB Information
Volt, Kernel for the OnePlus 5
Contributors
Zombie
Source Code: https://github.com/UndeadDeveloper/Volt-OP5-OOS-SimpleGX
Kernel Special Features: Undervolting, Overclocking
Version Information
Status: Beta
Created 2017-08-24
Last Updated 2018-04-12
Last edited:
