[KERNEL][y6][EMUI/CM] KudKernel [DISCONTINUED]

Status
Not open for further replies.
Search This thread

krasCGQ

Recognized Contributor
Apr 13, 2015
5,433
4,938
20
Kendari
kud.my.id
Introduction
KudKernel is a custom kernel that built straight from the official sources with slight modifications to keep it as stable as stock, but with some additional features that won't impact stability overall.

Disclaimer
Code:
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this KERNEL
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point your finger at me for messing up your device, I will laugh at you.
 */

Kernel features
  • Compiled from @DestructoSphere's kernel sources
  • Compiled using Hyper Toolchain 4.9.x, SaberMod with Uber dependencies
  • Compiled using -Ofast flag for speed
  • Compiled with ARM and NEON optimizations
  • Using AnyKernel2 template for unified support
  • Kernel.org version 3.10.49 (stock)
  • XZ kernel compression
  • Switchable SELinux (default: Enforcing)
  • ADB full root access
  • Init.d support
  • Kernel Samepage Merging (KSM Legacy)
  • Selectable CPU governors: interactive (default), ondemand, conservative, performance
  • Selectable I/O schedulers: noop (default), cfq, deadline, row
  • Selectable TCP congestion algorhythms: westwood (default), cubic, bic, reno, htcp, highspeed, hybla, vegas, scalable, lp, veno, yeah, illinois
  • And more features to come soon...

Downloads
  • v1.0 on Dropbox
  • All versions on XDA DevDB (soon)
  • All test builds on Dropbox

Installation instructions
Note: Make sure you've unlocked your bootloader, either by obtaining unlock code from EMUI's website or somewhere else.
  • Make sure you've the latest version of TWRP. Recommended version
  • Reboot to Recovery mode by combination of Power+Vol(+) buttons.
  • Select Install from TWRP screen.
  • Select KudKernel .zip file.
  • Swipe Flash button.
  • Finally wipe cache and dalvik. (optional)
  • Reboot to system.

Known issues
Don't report issues that are already listed here.
  • UKSM support is here but not enabled yet due to too many changes on the kernel source...
  • No hotplug on Interactive governor. Looking for a better hotplug instead...
  • Usable GPU governors: cpufreq, msm-adreno-tz, performance, powersave, simple_ondemand, userspace
    Selecting GPU governors other than these GPU governors would lead you into kernel panic!
  • Kernel Adiutor will freeze if you go to Entropy section. (probably not kernel related)
  • If you've problems when installing KudKernel, grab your build.prop and attach it here so I could add support for your device.

Bug reports & feature requests
Please use the DevDB section to report your issues or request feature(s) to be added. Please be noted that:
  • Bug reports without good explanation or logs are ignored.
  • Request for feature(s) that could break stability aren't accepted.

Special thanks
  • @DestructoSphere - original source
  • UBER TOOLCHAINS
  • SaberMod Team
  • @frap129 - Hyper Toolchains
  • @osm0sis - AnyKernel2 template

XDA:DevDB Information
KudKernel [Huawei Y6], Kernel for all devices (see above for details)

Contributors
krasCGQ, DestructoSphere
Source Code: https://github.com/KudKernel-y6

Kernel Special Features: See above.

Version Information
Status: No Longer Updated
Current Stable Version: v1.0
Stable Release Date: 2016-07-16

Created 2016-07-16
Last Updated 2016-11-07
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Introduction
    KudKernel is a custom kernel that built straight from the official sources with slight modifications to keep it as stable as stock, but with some additional features that won't impact stability overall.

    Disclaimer
    Code:
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this KERNEL
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point your finger at me for messing up your device, I will laugh at you.
     */

    Kernel features
    • Compiled from @DestructoSphere's kernel sources
    • Compiled using Hyper Toolchain 4.9.x, SaberMod with Uber dependencies
    • Compiled using -Ofast flag for speed
    • Compiled with ARM and NEON optimizations
    • Using AnyKernel2 template for unified support
    • Kernel.org version 3.10.49 (stock)
    • XZ kernel compression
    • Switchable SELinux (default: Enforcing)
    • ADB full root access
    • Init.d support
    • Kernel Samepage Merging (KSM Legacy)
    • Selectable CPU governors: interactive (default), ondemand, conservative, performance
    • Selectable I/O schedulers: noop (default), cfq, deadline, row
    • Selectable TCP congestion algorhythms: westwood (default), cubic, bic, reno, htcp, highspeed, hybla, vegas, scalable, lp, veno, yeah, illinois
    • And more features to come soon...

    Downloads
    • v1.0 on Dropbox
    • All versions on XDA DevDB (soon)
    • All test builds on Dropbox

    Installation instructions
    Note: Make sure you've unlocked your bootloader, either by obtaining unlock code from EMUI's website or somewhere else.
    • Make sure you've the latest version of TWRP. Recommended version
    • Reboot to Recovery mode by combination of Power+Vol(+) buttons.
    • Select Install from TWRP screen.
    • Select KudKernel .zip file.
    • Swipe Flash button.
    • Finally wipe cache and dalvik. (optional)
    • Reboot to system.

    Known issues
    Don't report issues that are already listed here.
    • UKSM support is here but not enabled yet due to too many changes on the kernel source...
    • No hotplug on Interactive governor. Looking for a better hotplug instead...
    • Usable GPU governors: cpufreq, msm-adreno-tz, performance, powersave, simple_ondemand, userspace
      Selecting GPU governors other than these GPU governors would lead you into kernel panic!
    • Kernel Adiutor will freeze if you go to Entropy section. (probably not kernel related)
    • If you've problems when installing KudKernel, grab your build.prop and attach it here so I could add support for your device.

    Bug reports & feature requests
    Please use the DevDB section to report your issues or request feature(s) to be added. Please be noted that:
    • Bug reports without good explanation or logs are ignored.
    • Request for feature(s) that could break stability aren't accepted.

    Special thanks
    • @DestructoSphere - original source
    • UBER TOOLCHAINS
    • SaberMod Team
    • @frap129 - Hyper Toolchains
    • @osm0sis - AnyKernel2 template

    XDA:DevDB Information
    KudKernel [Huawei Y6], Kernel for all devices (see above for details)

    Contributors
    krasCGQ, DestructoSphere
    Source Code: https://github.com/KudKernel-y6

    Kernel Special Features: See above.

    Version Information
    Status: No Longer Updated
    Current Stable Version: v1.0
    Stable Release Date: 2016-07-16

    Created 2016-07-16
    Last Updated 2016-11-07
    1
    plz answe hw scl l32 support?
    If TWRP by @DestructoSphere is able to boot on your phone, it should be compatible too because I'm using his kernel sources.

    However, make a backup if something happened after you flash my kernel.

    Sent from my ASUS_Z00A using XDA Labs
    1
    KudKernel for Huawei Y6 has been discontinued.
    1
    Thread closed at OP's request.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone