Not even Oreo custom ROMs are supported, so, forget about stock.
Elemental x and extended are the two options to choose from in case you are going for stock.
On Which ROM did u flashed?Flash it but got bootloop, if I remember correctly from tg I have to "convert to HMP", but can't find the link anywhere, can someone provide me the link? Also, if I want to go back to the old kernel (Optimus), what should I do?
On Which ROM did u flashed?
Great Stay Tuned For UpdatesHavoc-OS -v2.2-20190225.
I found a Convert2HMP-V2.zip at Moto G5 Plus telegram channel and flash it alongside the kernel. UniFied r3.0 Release 20190224 is working like a charm so far.
PS: Am I getting crazy or there was a 20190302 Slav OC version yesterday? (it got me stuck in bootloop)
/* * Your warranty is now void. * * We are not responsible for bricked devices, dead SD cards, * thermonuclear war or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications and if * you point the finger at us for messing up your device, we will laugh at you. Hard & a lot. * */
? C H A N G E L O G : ? Based on CAF tag LA.UM.7.6.r1-05300-89xx. ? Converted into Minimal Kernel. ? Updated CAF's CpuBoost with boost to max freq on app launches. ? Improved hexagon DSP for faster & louder audio processing. ? Compiled with baremetal GCC-9.1 ToolChain with graphite optimisations ? Fixed CAF's ****ery with Scheduling ? Non Debug kernel ? Reduced Kernel Size as low as possible. ? Switched to AK3 ? Updated Anxiety I/O to latest ? Used Uninterruptible waits on many drivers to reduce latency. ? Aligned Sentry slab cache on L1 cache line on centain memory management targets ? Improve TCP input & Output ? Misc Fixes & Optimisations
->> PureCAF-Release <<- * rebased kernel over CAF tag LA.UM.7.6.r1-05300-89xx. * updated wifi drivers from same CAF tag. * merged CAF's kernel security patches * disabled debugging, tracing from kernel. * compiled using DragonTC-9.0 with llvm polly optimizations. * Yes I have fixed media playback issue. * Disabled audit syscalls * Fixed F-Sync data loss * Improved CPU hotplugging with higher temps * Added K-Lapse v5.0 * Updated Anxiety I/O scheduler to latest version from tytydraco * Added state notifier driver * Updated adreno idler & converted it to use state notifier. * Updated interactive governor & converted it to use state notifier. * Added screen off max frequency tunable for interactive [default is 1036Mhz] * Added Slimbus OC * Re-Enabled CAF CPU boost with app boost. * Added boost to max freq on camera, fingerprint, display wakeup & app launch. * Increase Slimbus ROOT freq for louder audio * Changed CLK gear in wcd9335 & 9330 to support higher frequencies. * Added UKSM & blu_active. * Reduced off screen battery drain. * Tuned Vibration intensity * Improved vibrator scheduling * Added chacha20, Polly,Neon algorithms * Fully converted random to use chacha20 algorithms * Enabled Zswap module * miscellaneous Memory improvements.
? THE IMMENSITY KERNEL > Finally a Stable Build > Merged CAF tag 'LA.UM.7.6.r1-04800-89xx.0' > UpTo date with google's kernel common > Fixed PlayBack issue. > Fixed WhatsApp Data issue. > New fs(crypt/notify/jbd2/proc) Back ports. > Changed to Userspace Memory Killer. > Added SchedBoost support > Lowered Down the cpu-boost > Added Adreno Idler & AdrenoBoost support > Disabled Debug_Fs > Offload screen probe on dedicated Worker > Some Misc DevFreq Improvements > compiled With GCC-9 & DRAGON-TC-9.0 > enabled arm32 vDSO > Re-enabled PowerSaving Display Features. > Kernel is Optimized For Performance
// EAS ZENITH RELEASE // * Merged LA.UM.7.6.r1-04500-89xx * Merged v3.18.139 * Merged android-3.18 branch of Google's kernel common. * Added Misc Audio Improvements from CAF * Updated LowMemoryKiller from CAF * Added Arter97's F2FS patches * Compiled with GCC-9 + DragonTC-9.0 * Kernel Compiled with Clang Polly Optimizations * Kernel Optimized with -ffast-math, -floop-nest-optimize, -ftree-loop-distribution, -funsafe-math-optimizations, -mcpu=cortex-a53+crc+crypto+sve+simd, -march=armv8-a+crc+crypto+sve+simd, -mtune=cortex-a53, -fsanitize=local-init , -fgraphite-identity Optimizations * Kernel Optimized for Performance * Fresh ReadCopyUpdate[RCU] Backports from 4.9 * Generic Link Back ports from 4.9 * Linux Multi-Queue Block_IO_Queueing_Mechanism[blk-mq] Backports from 4.9 * Tons of Ram & Memory Optimization * Improved Boot Speed * Disabled Debugging from Many drivers * increased USB Charge Current & Voltage * Added sdFAT FileSystem driver * registered sdFAT as exFAT * New Improved Energy Cost Model * lots of Zram / Zswap/ Zpool improvements * New faster Zram Compression algorithm "zstd" * Fixed Memory Leaks from certain drivers. * Added support for disabling printK logging * Added optional touch boost config * Added Motorola's LMK_ADJ tree * Increased USB charge current to 2A * optimized KSM * added FP quick wakeup hack * Fixed inconsistent Mutex lock from many drivers * Slimbus Update to capture higher frequency * misc updates and improvements [/HIDE][/LIST]
1.) Compiled with Linaro-7.4.1 & Clang-9 2.) Optimized Clang with -ftree -fmodulo -fvect -fgcse -ffast optimisations. 3.) Used -03 for Clang compile 4.) Added ARM64 CRC32 hw accelerated module 5.) BOOSTED CRYPTO WITH -O3 6.) zram: increase max compression streams to 4 7.) Removed some more logging & created some more wq efficient drivers 8.) Merged Latest F2FS drivers from jaeguek/f2fs-stable 9.) More cpu_interactive updates 10.) Added Blu_Active CPUfreq Governor 11.) Added Intelliactive CPUfreq Governor 12.) Updated state_notifier driver 13.) Rewrite & Optimized Finger Print driver 14.) Fixed CPUFreq not dropping to lowest after input Boost 15.) Memory: swap only 1 page at a time 16.) Always perform a regular reboot upon panic 17.) cpuidle: lpm-levels: Remove sleep_disabled switch 18.) add ARM64-specific support for flatmen 19.) Added ChaCha20, ChaCha20POLY, ChaCha20_NEON algorithms 20.) SOUND: Allow clients to get small buffers (1ms) for lowest latency. 21.) SOUND: Add mutex protection for rtac cal apis 22.) SOUND: wcd9335: rebalance headphone gain if imbalance detected 23.) SOUND: Add simple API to check if a voice call is active 24.) SOUND: Increase HPH bias current to improve fidelity 25.) SOUND: Increase current to 165mA to update fidelity a little bit more 26.) SOUND: wcd9335: enable HeadPHone impedence detection 27.) SOUND: WCD9335: Enhance SLimbus CLK Gear 28.) SOUND: codec: improve impedance sense accuracy and change debounce time 29.) SOUND: sound:soc: Increase tasha wcd9335 sido_voltage 30.) SOUND: wcd9335: disable core collapse power gating 31.) SOUND: Propagate dolby set_license status 32.) SOUND: qdsp6v2: dynamic perf mode control 33.) SOUND: ASoC: wcd9330: correct HPH PA enable/disable setting 34.) SOUND: ASoC: wcd9330: Update HPH class-h enables based on mbhc status 35.) SOUND: ASoC: wcd9330: Update MCLK Frequency select for 12.288MHz clock 36.) SOUND: ASoC: wcd9330: Update the codec MAD dai for 24 bit support 37.) SOUND: ASoC: audio: fix audio drops issue in HPH for loud clips 38.) SOUND: ASoC: wcd9330: add support for packed 24 bit. 39.) SOUND: wcd9330 adapted lazerl0rd's zest kernel's driver 40.) Display: synaptics - Fix slow wakeup issue [/List][/Hide]
[ ENDGAME ] RELEASE:- -> Merged latest linux version 3.18.138 -> UNIFIED BUILD -> improved deep sleep enter time -> Changed GPU idle-timeout 64ms -> Locked GPU initial frequency to 133Mhz. -> updated cpu_input_boost • marked it workqueue bound. • lower down the max boost duration on top-app. • Fixed input boost dont getting triggered while screen_off • Boost when memory pressure becomes high • dont boost CPU when duration is 0 -> Limit the rate of CPUfreq clock-rate changes.[we dont want it to change freq every 50ms]. -> cpu_input_boost : simplify screen-awake check. -> devfreq_boost : simplify screen-awake check. -> Massive update to Anxiety I/O scheduler -> cpufreq: interactive: Skip timer when policy->min == policy->max -> Stopped Log | dmesg spam from some drivers. -> Properly fix use of uninitialized variables. [/HIDE][/LIST]
[PETRICHOR ] RELEASE:- # Changelog ->More Smoother & Faster -> Compiled with aarch64-linux-gnu-9.0 + clang-9.0.0 -> Upstreamed to linux version 3.18.137. -> Fixed dts_Ultra support -> Readded Maple i/O -> Removed old & poor i/o schedulers -> added Ultra Kernel Samepage merging for devices with less RAM [Only for 2/3 gb varients] -> Updated cpu_input_boost -> made the cpu_input_boost less aggressive. -> Boost FingerPrint sensor on Wake. -> increased boost duration while using camera. -> added app launch boost [boost the min cpu freq to boost freq when a app becomes a "top-app"]. -> Added Simple MSM themal Monitor [Really awesome] -> Fixed Direct references to HZ on many drivers. -> improved Virtual Memory's Performance. -> ULPS on all Display panels -> Some underthehood cleanups & optimizations
~~IMMENSITY • KERNEL~~ FASTER, SMOOTHER & SMARTER -> Compiled with Linaro-7 -> Up to date with the latest stable Linux version (3.18.136) -> Patches from Code Aurora Forum targeting GPU, touchscreen/video, storage, and sound -> Kernel hardening from CopperheadOS -> Mainline Linux patches for CFQ and media memory allocation. -> Several subsystems converted to use power efficient workqueues. -> Westwood as the default congestion algorithm -> TCP_Westwood optimizations for better speeds -> Added Anxiety I/O scheduler [default] -> KCAL color control v2 -> Minimum/maximum backlight control -> Vibration control -> Wake gestures (thanks to [user=4684315]@flar2[/user]) -> Boeffla Wakelock Blocker -> Available to flash with AnyKernel2 (thanks to [user=4544860]@osm0sis[/user]) -> basically some crypto stuff that you won't understand -> some entropy tweaks that you will not understand -> page/slub sanitization ;_; -> fsync on/off [default -off] -> DTS_Eagle hardware/software processing -> some Audio Improvemts for you AudioPhiles -> arm32 vDSO support -> Fix QCOM mismerges -> msm_performance improvements -> cpufreq - interactive optimizations -> Memory Improvements [a Lot] -> CPU_input_boost, Devfreq_boost from <Sultan> -> FP Wakeup, Display Wakeup improvements -> kgsl,devfreq increase workerthread priority -> some arm64 up streams from mainline -> enabled ULPS on display -> Remove Debugging from LowMemoryKiller. -> updated & optimized haptic driver -> increased haptic voltage [a lil] -> increased max charge capacity to 85 -> State Notifier Support -> Simple GPU Algorithm -> Added Adreno Boost -> Added Adreno Idler -> Enabled High Performance Audio by default -> added I/O Swicher driver -> Added Ultra Kernel Same page Merging -> and many miscellaneous stuff just stalk at my git. -> Yes FocusFix is there
• Some Major Cleanups • Removed UC • Removed Slimbus OC • Removed Audio Codec OC • Removed All Hotplugs [People don't use it ] • Removed Conservative, Userspace & Ondedmand CPU governors • Replaced with Intelliactive, BioShock, Darkness, Impulse . • Added Westwood TCP congestion algorithm [Default] • Added Anxiety & Tripndroid I/O [CFQ Default] • Lower The Input Boost Perf Freq to 1401600 & Increase Devfreq boost freq to 1401600 [Save little power] • msm: kgsl: Increase worker thread priority from 2 -> 16 • Update RT priority • always perform warm reboot • swap pages one at a time • optimize interactive gov for battery efficiency. • Misc Speed / Memory Improvements. • Added Voltage Control [ported from 8996]. • Added Simple GPU Algorithm • Added AdrenoBoost • Disabled GFS. • qdsp6v2: Set decoder output to 24 bit • wcd9335 - Added laster k's drivers • wcd9335 - enabled power gating. [/LIST][/HIDE]
-> Upstream to v3.18.136 -> Removed all Custom CPU Governors Expect blu_active. -> Removed FP-Boost instead Optimized the FP driver -> Removed Intellithermal Driver -> Increased Charging Limit from 70% to 80% -> Added Mainline Bfq I/O updates -> Memory Optimizations -> Faster Camera Focus -> Focus Fix Added -> Added Custom Hotplug Drivers • LazyPlug • Blu_Plug • Intelli_Hotplug • AutoSMP_Hotplug • AiO Hotplug • MSM_Hotplug • ThunderPlug • Alucard Hotplug -> Add an Api to check if Voice Call is active. -> Enhanced Slimbus CLK Gear. -> Increased Slimbus Frequency. -> Sound - Added Dynamic Perf Control. -> wcd tunings -> Added Adreno Boost -> Set GPU idle-timeout to 64ms. -> I/O Changed to CFQ -> Custom Hotplugs is disabled by Default -> misc updates and improvements [/LIST][/HIDE]