I will try PE CAF today and check if it is compatible.Awesome as always , especially those audio tweaks , couldn't ask for more .
Make a build compatible with CAF roms too , which has most goodies .
I will try PE CAF today and check if it is compatible.Awesome as always , especially those audio tweaks , couldn't ask for more .
Make a build compatible with CAF roms too , which has most goodies .
By using a Kernel adiutor from PlayStore
Why Not Try it and Post your Honest Review Here.what is the performance for those of us who have the 2 GB ram variant? In case someone like me wants to go back to Pie?
what is the performance for those of us who have the 2 GB ram variant? In case someone like me wants to go back to Pie?
Not even Oreo custom ROMs are supported, so, forget about stock.Supported ROMs ? I mean only custom Oreo/Pie ROMs or stock Oreo ROM too ?
Not even Oreo custom ROMs are supported, so, forget about stock.
Elemental x and extended are the two options to choose from in case you are going for stock.
Elemental x is the only way to install Xposed on stock.Running Elemental X presently, had a feeling that this might be the case. Thanx for your prompt clarification !
On Which ROM did u flashed?Flash it but got bootloop, if I remember correctly from tg I have to "convert to HMP", but can't find the link anywhere, can someone provide me the link? Also, if I want to go back to the old kernel (Optimus), what should I do?
Great Stay Tuned For UpdatesHavoc-OS -v2.2-20190225.
I found a Convert2HMP-V2.zip at Moto G5 Plus telegram channel and flash it alongside the kernel. UniFied r3.0 Release 20190224 is working like a charm so far.
Thank you.
PS: Am I getting crazy or there was a 20190302 Slav OC version yesterday? (it got me stuck in bootloop)
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
? C H A N G E L O G :
? Based on CAF tag LA.UM.7.6.r1-05300-89xx.
? Converted into Minimal Kernel.
? Updated CAF's CpuBoost with boost to max freq on app launches.
? Improved hexagon DSP for faster & louder audio processing.
? Compiled with baremetal GCC-9.1 ToolChain with graphite optimisations
? Fixed CAF's ****ery with Scheduling
? Non Debug kernel
? Reduced Kernel Size as low as possible.
? Switched to AK3
? Updated Anxiety I/O to latest
? Used Uninterruptible waits on many drivers to reduce latency.
? Aligned Sentry slab cache on L1 cache line on centain memory management targets
? Improve TCP input & Output
? Misc Fixes & Optimisations
->> PureCAF-Release <<-
* rebased kernel over CAF tag LA.UM.7.6.r1-05300-89xx.
* updated wifi drivers from same CAF tag.
* merged CAF's kernel security patches
* disabled debugging, tracing from kernel.
* compiled using DragonTC-9.0 with llvm polly optimizations.
* Yes I have fixed media playback issue.
* Disabled audit syscalls
* Fixed F-Sync data loss
* Improved CPU hotplugging with higher temps
* Added K-Lapse v5.0
* Updated Anxiety I/O scheduler to latest version from tytydraco
* Added state notifier driver
* Updated adreno idler & converted it to use state notifier.
* Updated interactive governor & converted it to use state notifier.
* Added screen off max frequency tunable for interactive [default is 1036Mhz]
* Added Slimbus OC
* Re-Enabled CAF CPU boost with app boost.
* Added boost to max freq on camera, fingerprint, display wakeup & app launch.
* Increase Slimbus ROOT freq for louder audio
* Changed CLK gear in wcd9335 & 9330 to support higher frequencies.
* Added UKSM & blu_active.
* Reduced off screen battery drain.
* Tuned Vibration intensity
* Improved vibrator scheduling
* Added chacha20, Polly,Neon algorithms
* Fully converted random to use chacha20 algorithms
* Enabled Zswap module
* miscellaneous Memory improvements.
? THE IMMENSITY KERNEL
> Finally a Stable Build
> Merged CAF tag 'LA.UM.7.6.r1-04800-89xx.0'
> UpTo date with google's kernel common
> Fixed PlayBack issue.
> Fixed WhatsApp Data issue.
> New fs(crypt/notify/jbd2/proc) Back ports.
> Changed to Userspace Memory Killer.
> Added SchedBoost support
> Lowered Down the cpu-boost
> Added Adreno Idler & AdrenoBoost support
> Disabled Debug_Fs
> Offload screen probe on dedicated Worker
> Some Misc DevFreq Improvements
> compiled With GCC-9 & DRAGON-TC-9.0
> enabled arm32 vDSO
> Re-enabled PowerSaving Display Features.
> Kernel is Optimized For Performance
// EAS ZENITH RELEASE //
* Merged LA.UM.7.6.r1-04500-89xx
* Merged v3.18.139
* Merged android-3.18 branch of Google's kernel common.
* Added Misc Audio Improvements from CAF
* Updated LowMemoryKiller from CAF
* Added Arter97's F2FS patches
* Compiled with GCC-9 + DragonTC-9.0
* Kernel Compiled with Clang Polly Optimizations
* Kernel Optimized with
-ffast-math,
-floop-nest-optimize, -ftree-loop-distribution,
-funsafe-math-optimizations,
-mcpu=cortex-a53+crc+crypto+sve+simd,
-march=armv8-a+crc+crypto+sve+simd,
-mtune=cortex-a53,
-fsanitize=local-init ,
-fgraphite-identity Optimizations
* Kernel Optimized for Performance
* Fresh ReadCopyUpdate[RCU] Backports from 4.9
* Generic Link Back ports from 4.9
* Linux Multi-Queue Block_IO_Queueing_Mechanism[blk-mq] Backports from 4.9
* Tons of Ram & Memory Optimization
* Improved Boot Speed
* Disabled Debugging from Many drivers
* increased USB Charge Current & Voltage
* Added sdFAT FileSystem driver
* registered sdFAT as exFAT
* New Improved Energy Cost Model
* lots of Zram / Zswap/ Zpool improvements
* New faster Zram Compression algorithm "zstd"
* Fixed Memory Leaks from certain drivers.
* Added support for disabling printK logging
* Added optional touch boost config
* Added Motorola's LMK_ADJ tree
* Increased USB charge current to 2A
* optimized KSM
* added FP quick wakeup hack
* Fixed inconsistent Mutex lock from many drivers
* Slimbus Update to capture higher frequency
* misc updates and improvements
[/HIDE][/LIST]
1.) Compiled with Linaro-7.4.1 & Clang-9
2.) Optimized Clang with -ftree -fmodulo -fvect -fgcse -ffast optimisations.
3.) Used -03 for Clang compile
4.) Added ARM64 CRC32 hw accelerated module
5.) BOOSTED CRYPTO WITH -O3
6.) zram: increase max compression streams to 4
7.) Removed some more logging & created some more wq efficient drivers
8.) Merged Latest F2FS drivers from jaeguek/f2fs-stable
9.) More cpu_interactive updates
10.) Added Blu_Active CPUfreq Governor
11.) Added Intelliactive CPUfreq Governor
12.) Updated state_notifier driver
13.) Rewrite & Optimized Finger Print driver
14.) Fixed CPUFreq not dropping to lowest after input Boost
15.) Memory: swap only 1 page at a time
16.) Always perform a regular reboot upon panic
17.) cpuidle: lpm-levels: Remove sleep_disabled switch
18.) add ARM64-specific support for flatmen
19.) Added ChaCha20, ChaCha20POLY, ChaCha20_NEON algorithms
20.) SOUND: Allow clients to get small buffers (1ms) for lowest latency.
21.) SOUND: Add mutex protection for rtac cal apis
22.) SOUND: wcd9335: rebalance headphone gain if imbalance detected
23.) SOUND: Add simple API to check if a voice call is active
24.) SOUND: Increase HPH bias current to improve fidelity
25.) SOUND: Increase current to 165mA to update fidelity a little bit more
26.) SOUND: wcd9335: enable HeadPHone impedence detection
27.) SOUND: WCD9335: Enhance SLimbus CLK Gear
28.) SOUND: codec: improve impedance sense accuracy and change debounce time
29.) SOUND: sound:soc: Increase tasha wcd9335 sido_voltage
30.) SOUND: wcd9335: disable core collapse power gating
31.) SOUND: Propagate dolby set_license status
32.) SOUND: qdsp6v2: dynamic perf mode control
33.) SOUND: ASoC: wcd9330: correct HPH PA enable/disable setting
34.) SOUND: ASoC: wcd9330: Update HPH class-h enables based on mbhc status
35.) SOUND: ASoC: wcd9330: Update MCLK Frequency select for 12.288MHz clock
36.) SOUND: ASoC: wcd9330: Update the codec MAD dai for 24 bit support
37.) SOUND: ASoC: audio: fix audio drops issue in HPH for loud clips
38.) SOUND: ASoC: wcd9330: add support for packed 24 bit.
39.) SOUND: wcd9330 adapted lazerl0rd's zest kernel's driver
40.) Display: synaptics - Fix slow wakeup issue
[/List][/Hide]
[ ENDGAME ] RELEASE:-
-> Merged latest linux version 3.18.138
-> UNIFIED BUILD
-> improved deep sleep enter time
-> Changed GPU idle-timeout 64ms
-> Locked GPU initial frequency to 133Mhz.
-> updated cpu_input_boost
• marked it workqueue bound.
• lower down the max boost duration on top-app.
• Fixed input boost dont getting triggered while screen_off
• Boost when memory pressure becomes high
• dont boost CPU when duration is 0
-> Limit the rate of CPUfreq clock-rate changes.[we dont want it to change freq every 50ms].
-> cpu_input_boost : simplify screen-awake check.
-> devfreq_boost : simplify screen-awake check.
-> Massive update to Anxiety I/O scheduler
-> cpufreq: interactive: Skip timer when policy->min == policy->max
-> Stopped Log | dmesg spam from some drivers.
-> Properly fix use of uninitialized variables.
[/HIDE][/LIST]
[PETRICHOR ] RELEASE:-
# Changelog
->More Smoother & Faster
-> Compiled with aarch64-linux-gnu-9.0 + clang-9.0.0
-> Upstreamed to linux version 3.18.137.
-> Fixed dts_Ultra support
-> Readded Maple i/O
-> Removed old & poor i/o schedulers
-> added Ultra Kernel Samepage merging for devices with less RAM [Only for 2/3 gb varients]
-> Updated cpu_input_boost
-> made the cpu_input_boost less aggressive.
-> Boost FingerPrint sensor on Wake.
-> increased boost duration while using camera.
-> added app launch boost [boost the min cpu freq to boost freq when a app becomes a "top-app"].
-> Added Simple MSM themal Monitor [Really awesome]
-> Fixed Direct references to HZ on many drivers.
-> improved Virtual Memory's Performance.
-> ULPS on all Display panels
-> Some underthehood cleanups & optimizations
~~IMMENSITY • KERNEL~~
FASTER, SMOOTHER & SMARTER
-> Compiled with Linaro-7
-> Up to date with the latest stable Linux version (3.18.136)
-> Patches from Code Aurora Forum targeting GPU, touchscreen/video, storage, and sound
-> Kernel hardening from CopperheadOS
-> Mainline Linux patches for CFQ and media memory allocation.
-> Several subsystems converted to use power efficient workqueues.
-> Westwood as the default congestion algorithm
-> TCP_Westwood optimizations for better speeds
-> Added Anxiety I/O scheduler [default]
-> KCAL color control v2
-> Minimum/maximum backlight control
-> Vibration control
-> Wake gestures (thanks to [user=4684315]@flar2[/user])
-> Boeffla Wakelock Blocker
-> Available to flash with AnyKernel2 (thanks to [user=4544860]@osm0sis[/user])
-> basically some crypto stuff that you won't understand
-> some entropy tweaks that you will not understand
-> page/slub sanitization ;_;
-> fsync on/off [default -off]
-> DTS_Eagle hardware/software processing
-> some Audio Improvemts for you AudioPhiles
-> arm32 vDSO support
-> Fix QCOM mismerges
-> msm_performance improvements
-> cpufreq - interactive optimizations
-> Memory Improvements [a Lot]
-> CPU_input_boost, Devfreq_boost from <Sultan>
-> FP Wakeup, Display Wakeup improvements
-> kgsl,devfreq increase workerthread priority
-> some arm64 up streams from mainline
-> enabled ULPS on display
-> Remove Debugging from LowMemoryKiller.
-> updated & optimized haptic driver
-> increased haptic voltage [a lil]
-> increased max charge capacity to 85
-> State Notifier Support
-> Simple GPU Algorithm
-> Added Adreno Boost
-> Added Adreno Idler
-> Enabled High Performance Audio by default
-> added I/O Swicher driver
-> Added Ultra Kernel Same page Merging
-> and many miscellaneous stuff just stalk at my git.
-> Yes FocusFix is there
• Some Major Cleanups
• Removed UC
• Removed Slimbus OC
• Removed Audio Codec OC
• Removed All Hotplugs [People don't use it ]
• Removed Conservative, Userspace & Ondedmand CPU governors
• Replaced with Intelliactive, BioShock, Darkness, Impulse .
• Added Westwood TCP congestion algorithm [Default]
• Added Anxiety & Tripndroid I/O [CFQ Default]
• Lower The Input Boost Perf Freq to 1401600 & Increase Devfreq boost freq to 1401600 [Save little power]
• msm: kgsl: Increase worker thread priority from 2 -> 16
• Update RT priority
• always perform warm reboot
• swap pages one at a time
• optimize interactive gov for battery efficiency.
• Misc Speed / Memory Improvements.
• Added Voltage Control [ported from 8996].
• Added Simple GPU Algorithm
• Added AdrenoBoost
• Disabled GFS.
• qdsp6v2: Set decoder output to 24 bit
• wcd9335 - Added laster k's drivers
• wcd9335 - enabled power gating.
[/LIST][/HIDE]
-> Upstream to v3.18.136
-> Removed all Custom CPU Governors Expect blu_active.
-> Removed FP-Boost instead Optimized the FP driver
-> Removed Intellithermal Driver
-> Increased Charging Limit from 70% to 80%
-> Added Mainline Bfq I/O updates
-> Memory Optimizations
-> Faster Camera Focus
-> Focus Fix Added
-> Added Custom Hotplug Drivers
• LazyPlug
• Blu_Plug
• Intelli_Hotplug
• AutoSMP_Hotplug
• AiO Hotplug
• MSM_Hotplug
• ThunderPlug
• Alucard Hotplug
-> Add an Api to check if Voice Call is active.
-> Enhanced Slimbus CLK Gear.
-> Increased Slimbus Frequency.
-> Sound - Added Dynamic Perf Control.
-> wcd tunings
-> Added Adreno Boost
-> Set GPU idle-timeout to 64ms.
-> I/O Changed to CFQ
-> Custom Hotplugs is disabled by Default
-> misc updates and improvements
[/LIST][/HIDE]