[KERNELl][V5][1.9ghz/720mhz]CHRISZUMA KERNEL[BASED ON INAZUMA]

Search This thread

martinbeiker

Member
Mar 20, 2016
28
4
I will test it, I'm a noob and I want to merge your kelnel with my rom's one, unless you come up with an Android 7.1 version.
 

NinetyRalph

New member
Jul 16, 2019
3
4
I have the Xt1527 with the ViperOs 9.0 custom rom, regrettably nobody is developing newer kernels for this device, and i want to run heavy games on my device. There's a way to flash this incredible kernel on newer android versions? Or the developer updated it? Someone please reply :'(

Sent from my XT1527 using Tapatalk
 

FlashZip

Member
Jul 1, 2021
7
0
Moto E 2015
LG Leon
hi, is it possible to use this kernel in xt1527 variant?
Because I have tried to flash this kernel in several 6.0 roms (one of them cm13) but it always gave me the same error that the kernel was not installed and it disabled my wifi

Could you help me?
 

FlashZip

Member
Jul 1, 2021
7
0
Moto E 2015
LG Leon
correct me if i am wrong, this kernel is only for version with qualcomm snapdragon 200 processor

I say it because in any custom marshmallow rom or in the stock rom it works for me, since I have the version with qualcomm snapdragon 410 (64 bits)

sent from my xt1527
 

lolvatveo

Senior Member
Nov 1, 2020
133
5
hahaha what a scared people?! did you know the 28nm arm cortex a53 cpu on phone can be run with frequency UP TO 3.1GHZ(O.C) stable so no need to worry, cpu has long life and hard to die unless you have at least ~ 85°C & up the silicon core maybe damaged or reduce life cycle, unstable or 250°C it can kill your CPU instantly.

Biểu tượng Cộng đồng đã xác minh
 
  • Like
Reactions: Viva La Android
hahaha what a scared people?! did you know the 28nm arm cortex a53 cpu on phone can be run with frequency UP TO 3.1GHZ(O.C) stable so no need to worry, cpu has long life and hard to die unless you have at least ~ 85°C & up the silicon core maybe damaged or reduce life cycle, unstable or 250°C it can kill your CPU instantly.

View attachment 5625385
Indeed. The Cortex-A53 (28nm) would be highly difficult to fry by overclocking it with this kernel, even if you intentionally tried with consistency
 
hahaha what a scared people?! did you know the 28nm arm cortex a53 cpu on phone can be run with frequency UP TO 3.1GHZ(O.C) stable so no need to worry, cpu has long life and hard to die unless you have at least ~ 85°C & up the silicon core maybe damaged or reduce life cycle, unstable or 250°C it can kill your CPU instantly.

View attachment 5625385
Indeed. The Surnia's MSM8916 would be highly difficult to fry by overclocking it with this kernel, even if you intentionally tried with consistency.
 
correct me if i am wrong, this kernel is only for version with qualcomm snapdragon 200 processor

I say it because in any custom marshmallow rom or in the stock rom it works for me, since I have the version with qualcomm snapdragon 410 (64 bits)

sent from my xt1527
All Moto E LTE Surnia models have the Qualcomm Snapdragon 410 (MSM8916) board platform.
The 3G variant of the Moto E 2015, codename Otus, uses the Qualcomm Snapdragon 200 (MSM8210) platform.
 

lolvatveo

Senior Member
Nov 1, 2020
133
5
Ilooked at the voltage of apq8084 board they only have ~0.83v to 1.25vol for 300-2.67GHz frequency. but at msm8916 board they gave voltage up to 1.05-1.35=i9 12900k voltage👹 🔥which is crazy for frequency only 200-1.19GHz. my device heats up to 75°C or 80 easily but it survived for 6 years (j5 2016). when it reaches the overheat mark. Throttle temperature will be activated and locked to max frequency at 998MHz my device very lag but 998 and 1.19GHz use same 1,35voltage and my phone doesn't drop temperature much. so this is due to an engineer stupidityyyyyyyyyyyyyyyyyy.
this is my cpu voltage regulator: 1050000 1150000 1350000
200 400 533 800 998 1094 1190 <1 1 2 2 3 3 3>
very high and fool voltage set
 
Last edited:
  • Like
Reactions: Viva La Android
I looked at the voltage of apq8084 board they only have ~0.83v to 1.25vol for 300-2.67GHz frequency. but at msm8916 board they gave voltage up to 1.05-1.35=i9 12900k voltage👹 🔥which is crazy for frequency only 200-1.19GHz. my device heats up to 75°C or 80 easily but it survived for 6 years (j5 2016). when it reaches the overheat mark. Throttle temperature will be activated and locked to max frequency at 998MHz my device very lag but 998 and 1.19GHz use same 1,35voltage and my phone doesn't drop temperature much. so this is due to an engineer stupidityyyyyyyyyyyyyyyyyy.
this is my cpu voltage regulator: 1050000 1150000 1350000
200 400 533 800 998 1094 1190 <1 1 2 2 3 3 3>
very high and fool voltage set
Wow. I had no idea about the core voltage defaults. I agree...that must have been an oversight on the part of Qualcomm's engineering team. I knew the Surnia's processor was die-hard, but now I have a better idea of why. Amazing.... 75 - 80°C (167 - 176°F) isn't too far from the boiling point of water. That's an insanely tough board platform.
 
  • Like
Reactions: lolvatveo

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Ilooked at the voltage of apq8084 board they only have ~0.83v to 1.25vol for 300-2.67GHz frequency. but at msm8916 board they gave voltage up to 1.05-1.35=i9 12900k voltage👹 🔥which is crazy for frequency only 200-1.19GHz. my device heats up to 75°C or 80 easily but it survived for 6 years (j5 2016). when it reaches the overheat mark. Throttle temperature will be activated and locked to max frequency at 998MHz my device very lag but 998 and 1.19GHz use same 1,35voltage and my phone doesn't drop temperature much. so this is due to an engineer stupidityyyyyyyyyyyyyyyyyy.
    this is my cpu voltage regulator: 1050000 1150000 1350000
    200 400 533 800 998 1094 1190 <1 1 2 2 3 3 3>
    very high and fool voltage set
    1
    I looked at the voltage of apq8084 board they only have ~0.83v to 1.25vol for 300-2.67GHz frequency. but at msm8916 board they gave voltage up to 1.05-1.35=i9 12900k voltage👹 🔥which is crazy for frequency only 200-1.19GHz. my device heats up to 75°C or 80 easily but it survived for 6 years (j5 2016). when it reaches the overheat mark. Throttle temperature will be activated and locked to max frequency at 998MHz my device very lag but 998 and 1.19GHz use same 1,35voltage and my phone doesn't drop temperature much. so this is due to an engineer stupidityyyyyyyyyyyyyyyyyy.
    this is my cpu voltage regulator: 1050000 1150000 1350000
    200 400 533 800 998 1094 1190 <1 1 2 2 3 3 3>
    very high and fool voltage set
    Wow. I had no idea about the core voltage defaults. I agree...that must have been an oversight on the part of Qualcomm's engineering team. I knew the Surnia's processor was die-hard, but now I have a better idea of why. Amazing.... 75 - 80°C (167 - 176°F) isn't too far from the boiling point of water. That's an insanely tough board platform.
  • 27
    Big thank to @zeeshanhussain12 for your kernel source :)
    Thank to @srfarias for selinux permissive!
    Thank to @ayush rao for testing.
    CHRISZUMA KERNEL SURNIA
    DOWNLOAD
    PLEASE USE THIS KERNEL ADIUTOR FOR FULL CONTROLING: KERNEL ADIUTOR MOD
    PLEASE PRESS THANK BUTTON IF YOU FIND THIS KERNEL INTERESTING!

    Original source code: https://github.com/nguyenquangduc2000/chriszuma-msm8916
    Compressed source code: http://www.mediafire.com/download/npfeapwd32057tl/chriszuma-msm8916-kernel.tar.gz
    Current status: Stable
    Special features: OC cpu 1.8ghz, OC gpu 650mhz, Fixed DT2W, Many governors and i/o chedulers, hotplugs
    Last edited: 07/03/2016

    Notice: If anyone has new ideas for next build, please comment on this thread.
    Code:
    Change log:
        V5
    OC cpu 1.9GHz, gpu 720MHz
    Uc gpu 19MHz when there is no load
    Added msm sleeper, bricked hotplug, auto smp
    Added KCAL
    Selinux permissive is set as default
    Arch power
    Dynamic fsync 
    Added some governors, vr i/o scheduler
    Gentle fair sleepers.
    Many optimzed for improving battery and increasing performance.
        V4
    - Added IntelliPlug.
    - Fixed screen-freeze when apply dt2w on boot.
    - Added dt2w haft-bottom-screen (haftscreen) for saving battery.
    - Fixed issue that we can not use dt2w on the left side of the screen.
        V3
    - Added Intelliactive, Interactive_pro, bluactive, smartmax governor.
    - Added sioplus, zen, tripndroid i/o scheduler.
        V2
    - Fixed bug that prevents oc to 1.8 ghz.
    - Fixed bug that cause reboot while playing video on Youtube.
         V1.1
    - Fixed bugs on v1
    - Added 1248 Mhz Cpu frequent.
    - Now OC CPU and GPU is stable.
         V1
    - Removed barry allen governor because it always crashs apps.
    - Enabled Lionfish governor.
    - Added Bioshock, Yankactive, Zzmoove governor for saving batery and increasing performance.
    - Overclocked CPU to 1.8 Ghz.
    - Overclocked GPU to 650 Mhz.
    - Set boot with all cpu cores.
    - Included all features of Inazuma-R5.
    5
    Hey @nguyenquangduc2000
    I just flashed this kernel and remembered why I loved it so much. OC, Fast Charge, etc. I miss the development of this Kernel. I knw this is wrong, but could u pls update the kernel and introduce all the new security patches over the few months.

    Sent from my Motorola XT1521 using XDA Labs
    until offical cm14 and kernel for 7.0 are released, i will update the kernel. thank for your love :)
    3
    Dude how many people do u need to tell u not to ask for updates. IT IS WRONG TO DO SO AND IF U CONTINUE THIS I WILL REPORT U.

    Sorry for the off-topic post.
    Yes definitely. I'm going to take the time now to report this obnoxious behaviour. Maybe it will save you and I (and all other respectful members) from having to constantly read this never ending nonsense. I apologize as well for the off -topic remark.
    3
    Screenshot_20160610_215328.png

    It does not run at 1.8 all time :)
    3
    When Will this kernel be updated?
    When I have moreeeee free time :D