what error and on wich point,what defy you have, what build try to load?I followed all the steps and I feel the same,
When installing the CM11 gives me error
Last edited:
what error and on wich point,what defy you have, what build try to load?I followed all the steps and I feel the same,
When installing the CM11 gives me error
http://www.servimg.com/view/18270243/180what error and on wich point,what defy you have, what build try to load?
Please read carefuly and follow OP #1
I've already achievedPlease read carefuly and follow OP #1
Congr. friend . NO VIA OTA(cmupdater) there is danger to lost TWRP 2.8.0.0. If you have to update dnld the rom zip only,i suppose gapps is installed and then wipe ONLY cashe and dalvik and flash the rom, then reboot system.OTG supported and works also good on r/w mode, but you need a specilal cable named as otg cable(costs 3 euros on my country) and a usb stick or reader formated in FAT32.Take care, not connect a device that consums more than 100ma, max 120ma ,its dangerous to destroy the H/W.I've already achieved
Thanks
It is advisable to update via OTA?
Do not know if this already commented, but support OTG has or can be put?
Thanks for the reply.Congr. friend . NO VIA OTA(cmupdater) there is danger to lost TWRP 2.8.0.0. If you have to update dnld the rom zip only,i suppose gapps is installed and then wipe ONLY cashe and dalvik and flash the rom, then reboot system.OTG supported and works also good on r/w mode, but you need a specilal cable named as otg cable(costs 3 euros on my country) and a usb stick or reader formated in FAT32.Take care, not connect a device that consums more than 100ma, max 120ma ,its dangerous to destroy the H/W.
EDIT: for OTG use the new version of ES file explorer and make the right configs.
Have a nice day
.
@Madakite, Go to adjustments on ES, select the first option scroll down and check the USB plug-in message box, give more time to screen remain on and look what the phone says and confirm.If you really have the right OTG cable, not a usual one.If all ok disconect the otg first on adjustments/storage space on your phone and the remove the otg orherwise you have problem on rom? i dont know.Try another build, i am running now on 12/01/15 but you have try a newer than you running now.Thanks for the reply.
I do not detect none of the OTG cables to use either a USB flash drive with microUSB connector.
And I have the latest version of es_explorador.![]()
when connecting the cable does not leave anything in the status bar and is not es explorador.@Madakite, Go to adjustments on ES, select the first option scroll down and check the USB plug-in message box, give more time to screen remain on and look what the phone says and confirm.If you really have the right OTG cable, not a usual one.If all ok disconect the otg first on adjustments/storage space on your phone and the remove the otg orherwise you have problem on rom? i dont know.Try another build, i am running now on 12/01/15 but you have try a newer than you running now.
NO ,you must see the message on main screen not on status barwhen connecting the cable does not leave anything in the status bar and is not es explorador.
I'm with the last cm-11-20150307-NIGHTLY-mb52x.zip
I'll do wipe data and cache and install again?
already detects the es_explorer, but when I give I get a message saying "Failed Operation "NO ,you must see the message on main screen not on status bar
EDIT: if you like read this: for 12/01/15 go to dnld here: http://forum.xda-developers.com/showthread.php?t=2515036&page=701
my post #7002
you know the way now.
Connect and reconnect sometimes or reboot the phone and try again, you must have attached screen shots.already detects the es_explorer, but when I give I get a message saying "Failed Operation "
I have the EXACT same problem, since some months ago. And I'm sorry to say that it must be a hardware failure. In my case, even going back to stock, the image is opaque, impossible to auto focus and upside down. And in 720p video playback I can see really weird colours. So I guess there's no chance to fix that. I still couldn't figure out what was the cause tho. Don't even know if it is a camera module problem, or the chipset in the main boardhi there,
i bought a new defy+ beginning of this year. since updating it to CM11 the camera isn't working any longer (picture inverted/upside down, no autofocus). i first had installed the nighlty of 2015-01-21 and updated then to the version of 2015-02-28, but no difference. "a better camera" has also the same issue and google camera crashes immediately ...
any idea anyone?!
Connect and reconnect sometimes or reboot the phone and try again, you must have attached screen shots.
As i saw the usb stick is not recognized, may be depends on OTG USB CABLE or the sd card inserted![]()
![]()
![]()
My version cm-11-20150307-NIGHTLY
I'll leave as impossible.:crying::crying:As i saw the usb stick is not recognized, may be depends on OTG USB CABLE or the sd card inserted
on usb stick is not formated on FAT32 ,i dond think that is a rom problem although i dint try in this build.Try to the 8/3 build if you are sure on previous.I attache some screen shots,one of them is the otg cable with usb stick and micro sd inserted on this.
Greetings
Because of downgrade you have to start from sbf again,BUT make wipe data factory reset by stock recovery before and after sbf flashed( because the file system is repartitioned.)I'll leave as impossible.:crying::crying:
In my Note 3 operates without problem
EDIT: I can go from cm11-20150307 to 20150112-NIGHTLY?
Sbf which you advise me?Because of downgrade you have to start from sbf again,BUT make wipe data factory reset by stock recovery before and after sbf flashed( because the file system is repartitioned.)
For defy mb525 green lens on my location go here: http://motofirmware.center/files/fi...sajrdnfryortcee-p016-a016-hwp3-service1ffsbfgSbf which you advise me?
And sorry for so many questions