On Stock KK , Knox is in 2.0 version !!!!!!! more secure ,more "heavy" !!!!! damned .......... 
Bad luck
I triggered KNOX while i was installing STOCK Firmware on my phone. I choose the Orange Romania ( ORO ) firmware instead of a ROM firmware.. and, voila'. Knox Triggered.
I triggered KNOX while i was installing STOCK Firmware on my phone. I choose the Orange Romania ( ORO ) firmware instead of a ROM firmware.. and, voila'. Knox Triggered.
What are the consequences for rooting etc? Is it possible root on 4.4.2 (odin, OTA from original 4.2.2, towelroot, RootkitV2CF-autoroot)?On Stock KK , Knox is in 2.0 version !!!!!!! more secure ,more "heavy" !!!!! damned ..........
yes ! yes ....... i know ! it's not a problem ...
It's just impossible to downgrade via Sammobilefirmwares ,and for some people who don't want to root ,it's more heavy system ,and system encrypted :impossible to do some mods...
I have flashed Amestris_Kernel_V2-MK4_AUTO-ROOT_GT-I9192 to root which did not work. Then ROOT_I9192_CWM6_Kernel which worked for my 9192 device ( baseband DDU1BML1). Knox has not triggered.
I have flashed the knox free rom and original firmware with knox and re- rooted.
I am having problems with custom roms.
Roms based on 4.4.2 work well.
4.4.3 and 4.4.4 i get trouble with dual sim.
I have flashed the knox free rom and original firmware with knox and re- rooted.
I am having problems with custom roms.
Roms based on 4.4.2 work well.
4.4.3 and 4.4.4 i get trouble with dual sim.
I am still using a pre-knox 4.2.2 firmware (i9195xxuamh3). Is it possible to modify the official 4.4.2 ROM to not install knox? so I don't get knox bit flipped when I later choose to install a custom rom?
EDIT: okay, I found this http://www.s4miniarchive.com/2013/12/how-to-remove-knox-bootloader-from-new.html
Has anyone tried this with the 4.4.2 rom already? It's supposed to have knox 2.0, so this might make a difference.
EDIT: okay, I found this http://www.s4miniarchive.com/2013/12/how-to-remove-knox-bootloader-from-new.html
Has anyone tried this with the 4.4.2 rom already? It's supposed to have knox 2.0, so this might make a difference.
Last edited:
I'm using CarbonRom 4.4.4 on my 9192 (had BML1 firmware) amd I'm not facing any issues with dual sim
Yes noticed most dont have the problem.At a loss whether knox has been actually removed or something else.
Strangely the stable rom based on 4.4.2 works fine.
Not allowed to post links as yet.
It takes some time to register the networks when you change the subscriptions. it usually takes 20 to 30 seconds for me.
Just go back to the main settings menu and then enter the Multi Sim menu after 30 secs. Should be fine.
Ok , gonna do a fresh install and give it another go. Will let it run thru the day and see.
I restored to the knox free samsung firmware and double checked , no knox files at all. So root and knox free is confirmed.
Update :
Same issue , as soon as data call selected , it searches for network again and changes setting in multi sim. Works perfectly with 1 card disabled.
Update :
Just tried it with another cm11 version released. What is happening is
1) if i disable mobile data for 2nd sim , mobile networks automatically switch off.
2) if i use wifi , once wifi disabled again mobile networks go off
Turning mobile networks on , data is enable for both sims and even though i select any sim in sim manager , it just keeps toggling on its own.
I take it the telephony patch is not working for my device in roms based on 4.4.3 and above. Works with 4.4.2
Last edited:
I have a story that I believe its knox related.
Couple of months ago I broke the screen of my first i9192 knox free phone, then I bought the second one wich came with knox bootloader.
I didnt mod my 2nd. phone because i didn't whant to trip knox and loose warranty, just rooted with saferoot it worked flawlesly all the time in 3g/2g auto, i never got any problems.
By the time cm11 came out i was so happy that i din't care about warranty and triped knox installing latest cwm recovery, flashed cm11 and it worked fine but I had a lot of signal drops while using 3G, but still I move on in 2g mode only I tried every build but still I have signal drops while using 3g mode some times where better than others, but still after some time the phone lost 3g signal, then I get bad quality on calls not connected to the network and no signal at all, but at the time I choose GSM only mode the signal got back and working fine but only in GSM mode, but none of the users of cm11 reported my issue then i thought was my modem tried different ones but with all i got bad quality on calls and network drops if i select 3G mode, even "wcdma auto" or "wcdma only" i end with no signal, no network, bad quality on calls that was fixed using "GMS only"
yesterday I was sugested to try back a stock firmware, the latest blackedition i proceed with the instalation, but my sorprise was that the issue persist, network drops in 3G mode bad quality of calls and not registered on network, then tried my phone with different simcards and all seems to work in 3g but didn't have the time to try them for long time, then its like mine that works for some time then drops, but my simcards were working flawles and connecting 3g signal on other phones then I didn't blame the sims, since they work on other phones.
still sad and pissed off I came home and disassembly the phone and exchange mainboards. the phone booted normaly in the old rom and working fine and connecting to 3G, then I update recovery and install a cm11 to test.
From yesterday untill now my phone has been working flawlesly on cm11 with the old knox free board, then I blame tripping Knox all the problems I had with 3G signal and somehow screwing the modem.
This video is with the Knox 0x1 board and the "bug"
http://youtu.be/s_v5jLVWb44
This video is with the Knox free bootloader board, wcdma works in both sims.
http://youtu.be/SODNFV4U-ao
Couple of months ago I broke the screen of my first i9192 knox free phone, then I bought the second one wich came with knox bootloader.
I didnt mod my 2nd. phone because i didn't whant to trip knox and loose warranty, just rooted with saferoot it worked flawlesly all the time in 3g/2g auto, i never got any problems.
By the time cm11 came out i was so happy that i din't care about warranty and triped knox installing latest cwm recovery, flashed cm11 and it worked fine but I had a lot of signal drops while using 3G, but still I move on in 2g mode only I tried every build but still I have signal drops while using 3g mode some times where better than others, but still after some time the phone lost 3g signal, then I get bad quality on calls not connected to the network and no signal at all, but at the time I choose GSM only mode the signal got back and working fine but only in GSM mode, but none of the users of cm11 reported my issue then i thought was my modem tried different ones but with all i got bad quality on calls and network drops if i select 3G mode, even "wcdma auto" or "wcdma only" i end with no signal, no network, bad quality on calls that was fixed using "GMS only"
yesterday I was sugested to try back a stock firmware, the latest blackedition i proceed with the instalation, but my sorprise was that the issue persist, network drops in 3G mode bad quality of calls and not registered on network, then tried my phone with different simcards and all seems to work in 3g but didn't have the time to try them for long time, then its like mine that works for some time then drops, but my simcards were working flawles and connecting 3g signal on other phones then I didn't blame the sims, since they work on other phones.
still sad and pissed off I came home and disassembly the phone and exchange mainboards. the phone booted normaly in the old rom and working fine and connecting to 3G, then I update recovery and install a cm11 to test.
From yesterday untill now my phone has been working flawlesly on cm11 with the old knox free board, then I blame tripping Knox all the problems I had with 3G signal and somehow screwing the modem.
This video is with the Knox 0x1 board and the "bug"
http://youtu.be/s_v5jLVWb44
This video is with the Knox free bootloader board, wcdma works in both sims.
http://youtu.be/SODNFV4U-ao
Attachments
Last edited:
My case is even stranger. I am now on knox free stock rom , all good no problems. The cm11 stable by sekil based on 4.4.2 works well too. It is only with the roms based on 4.4.3 and 4 that give me trouble with multi sim. If i use 1 card then works really well. The 3g signal is fantastic and it catches on also real fast.
I am left scratching my head how it works with 4.4.2 and not 4.4.3/4
Also like i had said before the knox counter is still 0 x 0 , updating shows processing failed.
I am left scratching my head how it works with 4.4.2 and not 4.4.3/4
Also like i had said before the knox counter is still 0 x 0 , updating shows processing failed.
I think it is a hardware defect. I flashed original firmware with knox and send it to samsung. They are replacing the mother board. I will get my handset back tomorrow. Hoping that my issue is resolved. Will root and check it tomorrow night itself. My knox flag never triggered.
Last edited:
Knox already on Android 4.2.2?
Hi,
Today I got a new I9195 with firmware I9195XXUBML4 and Android 4.2.2. When I boot into download mode I can see the Knox flag as well as 2 Knox apps in the application manager. Do I already have a secure Knox bootloader which makes it impossible to flash an older firmware for example?
I´m a bit confused because often I only read: 4.2.2 is still good in terms of Knox and >4.2.2 is not.
So,
- is it possible to downgrade the firmware?
- is it possible to root AND install CWM without setting the Knox flag to 0x1?
Marcus
Hi,
Today I got a new I9195 with firmware I9195XXUBML4 and Android 4.2.2. When I boot into download mode I can see the Knox flag as well as 2 Knox apps in the application manager. Do I already have a secure Knox bootloader which makes it impossible to flash an older firmware for example?
I´m a bit confused because often I only read: 4.2.2 is still good in terms of Knox and >4.2.2 is not.
So,
- is it possible to downgrade the firmware?
- is it possible to root AND install CWM without setting the Knox flag to 0x1?
Marcus
Installing a custom recovery will always trip Knox!
Skickat från min GT-I9195 via Tapatalk
Skickat från min GT-I9195 via Tapatalk
And there is no need and no point to downgrade anything.
It doesn't matter what version of Android anything is in relation to KNOX.
It doesn't matter what version of Android anything is in relation to KNOX.
Hello, can please somebody check, can I install 4.4.2 rom, or root my phone, without voiding
Phone warranty with knox?
Послато са GT-I9192 користећи Тапаток 2
Phone warranty with knox?
Послато са GT-I9192 користећи Тапаток 2
Attachments
Hi,
Read this topic and you will find all answers that you need. I upgraded my phone last week and was using a Jelly Bean rom, following these topic I upgraded to KK and root my phone whithout voiding my warranty.
You just have to check if you don't have the new bootloader.
I think first enforcing kernel came with Knox, go in download mode (power+home+vol down) if the word Knox appear then you have Knox bootloader.
Best case it should be Knox 0x0 and official status
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone