• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

KonaBess [GPU overclock & undervolt] OnePlus 8 PRO

Search This thread

gsser

Senior Member
Dec 22, 2012
1,338
531
Eskisehir
OnePlus 5T
OnePlus 8 Pro
If you manage to stabilize everything, I would be very grateful for sending the configuration. I care about the highest stability, energy efficiency and low temperatures.
Imo it is stable now. Gpu stays at 490-525 most of the time. On heavier loads it starts to use 920. No artifacts. Drainage is more optimized compared to stock RA fork. In the video you can see with adreno boost set to low it uses 920mhz, then i disable it and it stays on 490. See the mA drain differences. Normally 920mhz comes with max voltage level, i dropped it 2 levels, got artifacts and bumped up 1 more. Basically it is 1 step lower than stock RA fork. Well many of the clock voltages are 2 or 3 steps lower.

 
  • Like
Reactions: krkhaha

Noob9496

Senior Member
Jul 28, 2017
267
80
OnePlus 6
OnePlus 8 Pro
Imo it is stable now. Gpu stays at 490-525 most of the time. On heavier loads it starts to use 920. No artifacts. Drainage is more optimized compared to stock RA fork. In the video you can see with adreno boost set to low it uses 920mhz, then i disable it and it stays on 490. See the mA drain differences. Normally 920mhz comes with max voltage level, i dropped it 2 levels, got artifacts and bumped up 1 more. Basically it is 1 step lower than stock RA fork. Well many of the clock voltages are 2 or 3 steps lower.

View attachment 5370229
Wow, it's nice. Just download settings are you upload, import in konabess, save and repack?
 

gsser

Senior Member
Dec 22, 2012
1,338
531
Eskisehir
OnePlus 5T
OnePlus 8 Pro
Do you have a stock configuration? 🙂 May I flash a stock boot.img?
if you want stock values, you should restore the images you backed up in konabess. if you didnt backup, try flashing your kernel's stock boot and dtbo images.

if you are using a kernel like radioactive, it should have dtbo and boot image in the zip. if you want to go back to stock oneplus kernel, you must dump payload, grab dtbo and boot image and flash them in fastboot.
 
  • Like
Reactions: Zetl

mobile-admin

New member
Jul 20, 2021
4
1
Imo it is stable now. Gpu stays at 490-525 most of the time. On heavier loads it starts to use 920. No artifacts. Drainage is more optimized compared to stock RA fork. In the video you can see with adreno boost set to low it uses 920mhz, then i disable it and it stays on 490. See the mA drain differences. Normally 920mhz comes with max voltage level, i dropped it 2 levels, got artifacts and bumped up 1 more. Basically it is 1 step lower than stock RA fork. Well many of the clock voltages are 2 or 3 steps lower.

View attachment 5370229
How did you overlay CPU, GPU, FPS, MEM usage?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    I am now on the sink of the 11 oxygen nucleus, which nucleus can you advise?
    Radioactive fork kernel 2.2.5
    1
    What is that overlay for cpu , fps , temp.ex ?
    Try cpu float or perfmon+
  • 3
    Let's share best configs for OnePlus 8 PRO. Anyone used it?

    What is this?

    A simple app that can custom GPU frequency and voltage tables without recompiling the kernel, compatible for Snapdragon 865 series, 855 series, 888, 765 series, 750 / 690 series and 780G.

    How it works?

    By unpacking Boot / Vendor Boot image, decompiling and editing relevant dtb (device tree binary) files, and finally repacking and flashing.

    Why "KonaBess"?

    "Kona" is the code name of Snapdragon 865 series.
    Snapdragon 888 's GPU has minus improvement in energy efficiency, thus we are able to overclock sd865 and beat it. And this is the reason why the app was born.
    Though sd888 is compatible now, the app name won't change.
    How much improvement can I get?
    I see someone undervolted his sd865, reducing power cost 25% in gfx(4.2w->3.2w) bench.
    In fact, it is chip-specific and depends on your stability requirements.

    Topic for Other Device

    Download APK
    1
    Here's my config for less heat while trying to achieve maximum performance:
    https://drive . google . com/file/d/1GhjJJttl5UZvUIytOSF1LZmEaPzxGbh6/view?usp=drivesdk
    Paste and delete spaces.
    I experience very rare artifacts in Dolphin Emulator with this config, so if you all suggest some changes, you're welcome.
    1
    No adreno boost.
    1
    If you manage to stabilize everything, I would be very grateful for sending the configuration. I care about the highest stability, energy efficiency and low temperatures.
    Imo it is stable now. Gpu stays at 490-525 most of the time. On heavier loads it starts to use 920. No artifacts. Drainage is more optimized compared to stock RA fork. In the video you can see with adreno boost set to low it uses 920mhz, then i disable it and it stays on 490. See the mA drain differences. Normally 920mhz comes with max voltage level, i dropped it 2 levels, got artifacts and bumped up 1 more. Basically it is 1 step lower than stock RA fork. Well many of the clock voltages are 2 or 3 steps lower.

    1
    Do you have a stock configuration? 🙂 May I flash a stock boot.img?
    if you want stock values, you should restore the images you backed up in konabess. if you didnt backup, try flashing your kernel's stock boot and dtbo images.

    if you are using a kernel like radioactive, it should have dtbo and boot image in the zip. if you want to go back to stock oneplus kernel, you must dump payload, grab dtbo and boot image and flash them in fastboot.