Download Odin v3.13.3
https://dl2018.sammobile.com/Odin3-v3.13.3.zip
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP than USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
Download the Samsung firmware for the Galaxy Note 10+ SM-N975F with product code MID from Iraq. This firmware has version number PDA N975FXXU1ASH5 and CSC N975FOXM1ASH5. The operating system of this firmware is Android 9 , with build date Fri, 09 Aug 2019 07:17:48 +0000. Security patch date is 2019-08-01, with changelist 16618471.
https://mega.nz/#!sgM2QIYQ!kt02nPuMbz9baO_VjzjdKkXRdRw6fMfVlo0dT2z5bdQ
https://dl2018.sammobile.com/Odin3-v3.13.3.zip
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP than USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
Download the Samsung firmware for the Galaxy Note 10+ SM-N975F with product code MID from Iraq. This firmware has version number PDA N975FXXU1ASH5 and CSC N975FOXM1ASH5. The operating system of this firmware is Android 9 , with build date Fri, 09 Aug 2019 07:17:48 +0000. Security patch date is 2019-08-01, with changelist 16618471.
https://mega.nz/#!sgM2QIYQ!kt02nPuMbz9baO_VjzjdKkXRdRw6fMfVlo0dT2z5bdQ
